Front Panel of MHO-200

Port 1 (colored green), through which you manage the Clusters (Security Groups).

To this port you connect:

• Check Point Management Server.

• Clients, from which you configure the Gaia OS on the Security Appliances connected to the Downlink ports (3).

Ports 2 - 16 (colored gray) are the Uplink ports.

To these ports you connect your external traffic and internal traffic networks.

You use DAC or Fiber cables (with transceivers)

Ports 17 - 30 (colored orange) are the Downlink ports.

To these ports you connect your Check Point Security Appliances.

You use DAC or Fiber cables (with transceivers).

Port 31 (colored yellow) is the External Synchronization port in the Dual Site configuration.

You connect a DAC cable between ports 31 on two Orchestrators MHO-200 for redundancy between different Maestro Sites.

In the Port Split mode:

• 1st, 2nd, and 3rd splits are Downlinks.

• 4th split is the External Sync.

Port 32 (colored blue) is the Internal Synchronization port.

You connect a DAC cable between ports 32 on two Orchestrators MHO-200 for redundancy on the same Maestro Site.

System Status LEDs.

See LEDs on the Front Panel of MHO-200.

Port LEDs that show the status of all ports (including the split ports).

See LEDs on the Front Panel of MHO-200.