Gaia Clish Commands on MHO-200 - delete maestro

Description:

Use these Gaia Clish commands to remove the various settings.

Important:

After each change in the configuration, you must run the save config command.

Syntax:

delete maestro
      authentication <Site ID>_<Member ID>
      cluster <Cluster ID>
            description
            site <Site ID> member <Member ID> description
      cluster-interface
            cluster <Cluster ID>
                  management-interface <Port ID>
                  uplink-interface <Port ID>
      cluster-member
            cluster <Cluster ID>
                  site <Site ID> member <Member ID>
      port <Port ID>
            site <Site ID> description
      site <Site ID>
            description
            name
      tap-entry
            site <Site ID> port <Port ID>
                  direction {ingress | egress} tap-port <Port ID>

Parameters:


Parameter	Description
`site <ID>`	Specifies the Site ID. Press the Tab key to see the available values.
`member <ID>`	Specifies the Member ID on the Site. Press the Tab key to see the available values.
`cluster <ID>`	Specifies the Cluster ID. Press the Tab key to see the available values.
`port <Port ID>`	Specifies the Port ID. Press the Tab key to see the available values.
`authentication`	Removes the authentication for the specified Orchestrator.
`description`	Removes the description text.
`cluster-interface ... management-interface <Port ID>`	Removes the specified Management port from the Cluster.
`cluster-interface ... uplink-interface <Port ID>`	Removes the specified Uplink port from the Cluster.
`cluster-member`	Removes the specified Security Appliance from the Cluster.
`tap-entry`	Removes the specified Tap (Span) rule. See Configuring a Tap Port on MHO-200.