Monitoring of MHO-200 with SNMP
Overview
You can monitor an Orchestrator with SNMP.
To enable and configure the SNMP on an Orchestrator, see the R82.20 Gaia Administration Guide > Chapter "System Management" > Section "SNMP".
The OID branch 1.3.6.1.4.1.2620.1.56 contains the data about:
-
Deployment (from 1.3.6.1.4.1.2620.1.56.301.1 to 1.3.6.1.4.1.2620.1.56.301.9)
-
Daemons (from 1.3.6.1.4.1.2620.1.56.301.10.1 to 1.3.6.1.4.1.2620.1.56.301.10.7)
-
Ports (from 1.3.6.1.4.1.2620.1.56.302.1.1.1)
You must query the IP address of the Orchestrator's MGMT port (located on the rear panel).
OID data about Deployment
OID Value |
OID Name |
OID Description |
Example |
|---|---|---|---|
|
orchestratorDeployementDeviceType |
Model of the Orchestrator |
|
|
orchestratorDeployementSerial |
Serial number of the Orchestrator |
|
|
orchestratorDeployementMacAddress |
Not used. |
|
|
orchestratorDeployementSiteId |
Site ID of this Orchestrator |
|
|
orchestratorDeployementMemberId |
Member ID of this Orchestrator in this Site |
|
|
orchestratorDeployementNumOfMhosOnSite |
Number of Orchestrators in this Site |
|
|
orchestratorDeployementNumOfSites |
Total number of Sites in the deployment |
|
|
orchestratorDeployementOrchd |
Not used. |
|
|
orchestratorDeployementMainOrchId |
ID of the Main Orchestrator |
|
OID data about Daemons
OID Value |
OID Name |
OID Description |
Example |
|---|---|---|---|
|
orchestratorDeployementDaemonsTableName |
Daemon name. |
|
|
orchestratorDeployementDaemonsTableStatus |
Daemon status. |
|
|
orchestratorDeployementDaemonsTablePid |
Process ID. |
|
|
orchestratorDeployementDaemonsTableCpu |
CPU utilization. |
|
|
orchestratorDeployementDaemonsTableMemory |
Memory utilization. |
|
|
orchestratorDeployementDaemonsTableRestarts |
Number of daemon restarts since the last boot. |
|
|
orchestratorDeployementDaemonsTableUptime |
Daemon uptime. |
|
OID data about Ports
OID Value |
OID Name |
OID Description |
Example |
|---|---|---|---|
|
orchestratorPortsPortsTablePhysicalPort |
Physical port label. |
|
|
orchestratorPortsPortsTableLogicalPort |
Logical port number. |
|
|
orchestratorPortsPortsTablePortId |
Internal port identifier. |
|
|
orchestratorPortsPortsTableInterfaceName |
Interface name in the Gaia OS. |
|
|
orchestratorPortsPortsTableType |
Configured port type. |
|
|
orchestratorPortsPortsTableSg |
To which Cluster this port is assigned. |
|
|
orchestratorPortsPortsTableQsfpMode |
Not used. |
|
|
orchestratorPortsPortsTableAdminState |
Administrative State of the port. |
|
|
orchestratorPortsPortsTableOperatingSpeed |
Operating speed (speed + interface mode). |
|
|
orchestratorPortsPortsTableMtu |
Not used. |
|
|
orchestratorPortsPortsTableLinkState |
Link state. |
|
|
orchestratorPortsPortsTableTransceiverState |
Transceiver presence/state. |
|
|
orchestratorPortsPortsTableAutoNegotiation |
Auto-negotiation setting. |
|
|
orchestratorPortsPortsTableRxFrames |
Total number of RX frames. |
|
|
orchestratorPortsPortsTableTxFrames |
Total number of TX frames. |
|
|
orchestratorPortsPortsTableRxFramesDelta |
Total number of RX frames since the last sample. |
|
|
orchestratorPortsPortsTableTxFramesDelta |
Total number of TX frames since the last sample |
|
|
orchestratorPortsPortsTableRxFramesPerSecond |
RX rate in frames/sec. |
|
|
orchestratorPortsPortsTableTxFramesPerSecond |
TX rate in frames/sec. |
|
|
orchestratorPortsPortsTableRxBytes |
Total number of RX bytes. |
|
|
orchestratorPortsPortsTableTxBytes |
Total number of TX bytes. |
|
|
orchestratorPortsPortsTableRxBytesDelta |
Total number of RX bytes since the last sample. |
|
|
orchestratorPortsPortsTableTxBytesDelta |
Total number of TX bytes since the last sample. |
|
|
orchestratorPortsPortsTableRxBytesPerSecond |
RX rate in bytes/sec. |
|
|
orchestratorPortsPortsTableTxBytesPerSecond |
TX rate in bytes/sec. |
|
|
orchestratorPortsPortsTableRxMbitPerSecond |
RX rate in megabit/sec. |
|
|
orchestratorPortsPortsTableTxMbitPerSecond |
TX rate in megabit/sec. |
|
|
orchestratorPortsPortsTableTemperature |
Transceiver temperature in °C. |
|
|
orchestratorPortsPortsTableRxPowerLanes |
Per-lane RX power. |
|
|
orchestratorPortsPortsTableTxPowerLanes |
Per-lane TX power. |
|
|
orchestratorPortsPortsTableCableIdentifier |
Not used. |
|
|
orchestratorPortsPortsTableCheckPointPartNumber |
Not used. |
|
|
orchestratorPortsPortsTableMinRxPower |
Not used. |
|
|
orchestratorPortsPortsTableMaxRxPower |
Not used. |
|
|
orchestratorPortsPortsTableMinTxPower |
Not used. |
|
|
orchestratorPortsPortsTableMaxTxPower |
Not used. |
|
|
orchestratorPortsPortsTableMinTemperature |
Not used. |
|
|
orchestratorPortsPortsTableMaxTemperature |
Not used. |
|
|
orchestratorPortsPortsTablePowerRequired |
Not used. |
|
|
orchestratorPortsPortsTableSerialNumber |
Transceiver serial number. |
|
|
orchestratorPortsPortsTableVendorName |
Transceiver vendor. |
|
|
orchestratorPortsPortsTableVendorPartNumber |
Vendor part number. |
|
|
orchestratorPortsPortsTableWavelength |
Optical wavelength in nanometers. |
|
|
orchestratorPortsPortsTablePortPowerClass |
Not used. |
|
|
orchestratorPortsPortsTablePortLinkIntegrity |
Link integrity status. |
|
|
orchestratorPortsPortsTableSpeed |
Configured port speed. |
|
|
orchestratorPortsPortsTableFecMode |
Forward Error Correction (FEC) mode. |
|