Avanan - Allow-List

Configure the Avanan Allow-List Rule

  1. In the Name field, enter Avanan - Allow-List.
  2. In the Apply this rule if... field, sender's IP address:

    1. In the first field, select The sender.

    2. In the next field, select IP address is in any of these ranges or exactly matches.

    3. Enter the IP address, click Add and then click Save.

    4. If your data residency is in the United States, enter this IP address:

      • 3.101.216.128/28
      • 18.97.17.224/28
      • 35.174.145.124
      • 44.211.178.96/28

    5. If your data residency is in Europe, enter this IP address:

      • 3.40.131.0/28
      • 3.252.108.160/28
      • 13.39.103.0/28
      • 52.212.19.177

    6. If your data residency is in Australia, enter this IP address:

      • 3.27.51.160/28
      • 13.211.69.231
      • 18.98.196.176/28
      • 18.143.136.64/28

    7. If your data residency is in Israel, enter this IP address:

      • 18.96.162.80/28
      • 18.96.162.96/28

    8. If your data residency is in Canada, enter this IP address:

      • 3.99.253.64/28
      • 3.101.216.128/28
      • 15.222.110.90
      • 18.99.4.64/28

    9. If your data residency is in India, enter this IP address:

      • 3.109.187.96
      • 18.96.227.0/28
      • 18.143.136.64/28
      • 43.205.150.240/29

    10. If your data residency is in United Kingdom, enter this IP address:

      • 3.41.0.160/28
      • 13.39.103.0/28
      • 13.42.61.32
      • 13.42.61.32/28

    11. If your data residency is in United Arab Emirates, enter this IP address:

      • 3.29.194.128/28
      • 3.29.194.144/28
      • 18.96.97.192/28

    12. If your data residency is in Singapore, enter this IP address:

      • 3.44.1.224/28
      • 18.99.40.64
  3. For the Do the following... field, select set the spam confidence level (SCL) to... > Bypass spam filtering.

    1. In the first field, select The message properties.

    2. In the next field, select set the spam confidence level (SCL).

    3. Select Bypass spam filtering and click Save.

  4. For the Except if... field, select A message header matches these text patterns.

    1. In the first field, select The message header.

    2. In the next field, select matches these text patterns.

    3. Click the first Enter text, enter X-CLOUD-SEC-AV-SCL and click Save.

    4. Click the second Enter text, enter the value true, click Add and then click Save.

  5. Click Next.
  6. In the Rule mode, select Enforce.
  7. From the Severity drop-down list, select the severity level.
  8. Select the Activate this rule on check box and select the required date and time.
  9. Select the Deactivate this rule on check box and select the required date and time.
  10. Select the Stop processing more rules checkbox.
  11. In the Match sender address in message field, select Header.
  12. Click Next.
  13. In the Review and finish window, verify the settings and click Finish.