show cluster site-id <Site ID> module

This command is supported only on:

  • Scalable Chassis

Note - You must run this command in Gaia gClish.

Description

Shows cluster configuration - hardware components on Scalable Chassis..

Syntax

show cluster site-id <Site ID><ESC><ESC>

show cluster site-id <Site ID> module <Module>

            ip

            ports_amount

            secondary_ip

            snmp_auth

            status

            username

Parameters

Parameter

Description

<Site ID>

Specifies the Site ID:

  • 1 - Site #1

  • 2 - Site #2

  • all - All Sites

<Module>

Specifies the hardware module:

  • CMM - CMMs

  • SSM1 - SSM #1

  • SSM2 - SSM #2

  • SSM3 - SSM #3

  • SSM4 - SSM #4

  • Mgmt - Management Ports

ip <IP Address>

Shows the primary IP address.

Applies only to the SSM modules.

ports_amount <Number>

Shows the number of ports.

Applies only to the SSM and Management Ports modules.

secondary_ip <IP Address>

Shows the secondary IP address.

Applies only to the CMM modules.

snmp_auth <Algorithm>

Shows the SNMP Authentication algorithm.

Applies only to the SSM and Management Ports modules.

status

Shows the status.

Applies only to the SSM and Management Ports modules.

username

Shows the internal username.

Applies only to the SSM and Management Ports modules.

Examples

[Global] HostName-ch01-01 > show cluster site-id all module SSM1 ip
1_01:
Site 1 SSM1 IP 198.51.100.32
Site 2 SSM1 IP 198.51.100.32

1_02:
Site 1 SSM1 IP 198.51.100.32
Site 2 SSM1 IP 198.51.100.32

1_03:
Site 1 SSM1 IP 198.51.100.32
Site 2 SSM1 IP 198.51.100.32

1_04:
Site 1 SSM1 IP 198.51.100.32
Site 2 SSM1 IP 198.51.100.32
[Global] HostName-ch01-01 >

Related Commands

[Global] HostName-ch01-01 > show cluster site-id all module Mgmt ports_amount
1_01:
Site 1 Mgmt ports amount 2
Site 2 Mgmt ports amount 2

1_02:
Site 1 Mgmt ports amount 2
Site 2 Mgmt ports amount 2

1_03:
Site 1 Mgmt ports amount 2
Site 2 Mgmt ports amount 2

1_04:
Site 1 Mgmt ports amount 2
Site 2 Mgmt ports amount 2
[Global] HostName-ch01-01 >
 
[Global] HostName-ch01-01 > show cluster site-id all module Mgmt status
1_01:
Site 1 Mgmt status active
Site 2 Mgmt status active

1_02:
Site 1 Mgmt status active
Site 2 Mgmt status active

1_03:
Site 1 Mgmt status active
Site 2 Mgmt status active

1_04:
Site 1 Mgmt status active
Site 2 Mgmt status active
[Global] HostName-ch01-01 >