set cluster site-id <Site ID> modules_amount

This command is supported only on:

Note - You must run this command in Gaia gClish.

Description

Configures cluster settings - the required number of hardware components.

Syntax

set cluster site-id <Site ID> modules_amount<ESC><ESC>

set cluster site-id <Site ID> modules_amount

cmm <1-2>

fans <1-6>

power_units <1-6>

Parameters

Parameter	Description
`<Site ID>`	Specifies the Site ID: `1` - Site #1 `2` - Site #2 `all` - All Sites
`cmm`	Configures the required number of Chassis Management Modules (CMMs).
`fans`	Configures the required number of Fans.
`power_units`	Configures the required number of Power Supply Units (PSU).

Related Commands