set cluster site-id <Site ID> alert_threshold

This command is supported only on:

  • Scalable Chassis

Note - You must run this command in Gaia gClish.

Description

Configures cluster settings - thresholds for hardware alerts.

Syntax

set cluster site-id <Site ID> alert_threshold<ESC><ESC>

set cluster site-id <Site ID> alert_threshold

      cpus_temperature_threshold_high <1-100 °C>

      cpus_temperature_threshold_low <1-100 °C>

      fans_threshold_high <1-15>

      fans_threshold_low <1-15>

      power_consumption_threshold_perc_high <1-100 %>

      power_consumption_threshold_perc_low <1-100 %>

Parameters

Parameter

Description

<Site ID>

Specifies the Site ID:

  • 1 - Site #1

  • 2 - Site #2

  • all - All Sites

cpus_temperature_threshold_high

Configures the high threshold for CPU temperature (°C).

Default: 95.

cpus_temperature_threshold_low

Configures the low threshold for CPU temperature (°C).

Default: 60.

fans_threshold_high

Configures the high threshold for fans speed.

Default: 11.

fans_threshold_low

Configures the low threshold for fans speed.

Default: 9.

power_consumption_threshold_perc_high

Configures the high threshold for power consumption (%).

Default: 90.

power_consumption_threshold_perc_low

Configures the low threshold for power consumption (%).

Default: 80.

Related Commands