set cluster alert_threshold

This command is supported only on these:

ElasticXL Cluster
Maestro Security Group
Scalable Chassis Security Group

Note - You must run this command in Gaia gClish.

Description:

Configures cluster settings - values for alert thresholds.

Related Commands

Syntax:

set cluster alert_threshold<ESC><ESC>

set cluster alert_threshold

concurr_conn_threshold_high <Value>

concurr_conn_threshold_low_ratio <Value>

concurr_conn_total_threshold_high <Value>

concurr_conn_total_threshold_low_ratio <Value>

conn_rate_threshold_high <Value>

conn_rate_threshold_low_ratio <Value>

conn_rate_total_threshold_high <Value>

conn_rate_total_threshold_low_ratio <Value>

cpu_load_threshold_perc_high <Value>

cpu_load_threshold_perc_low_ratio <Value>

hd_util_threshold_perc_high <Value>

hd_util_threshold_perc_low_ratio <Value>

mem_util_threshold_perc_high <Value>

mem_util_threshold_perc_low_ratio <Value>

packet_rate_threshold_high <Value>

packet_rate_threshold_low_ratio <Value>

packet_rate_total_threshold_high <Value>

packet_rate_total_threshold_low_ratio <Value>

throughput_threshold_high <Value>

throughput_threshold_low_ratio <Value>

throughput_total_threshold_high <Value>

throughput_total_threshold_low_ratio <Value>

Parameters

Parameter	Description
`concurr_conn_threshold_high <Value>`	Configures the high threshold for concurrent connections, for each CoreXL Firewall instance. Default: 2,000,000
`concurr_conn_threshold_low_ratio <Value>`	Configures the low threshold for concurrent connections, as percentage from the high threshold. Default: 80.
`concurr_conn_total_threshold_high <Value>`	Configures the high threshold for concurrent connections. Accumulative for all CoreXL Firewall instances. Default: 20,000,000.
`concurr_conn_total_threshold_low_ratio <Value>`	Configures the low threshold for concurrent connections, as percentage from the high threshold. Accumulative for all CoreXL Firewall instances Default: 80.
`conn_rate_threshold_high <Value>`	Configures the high threshold for connection rate (conn/sec), for each CoreXL Firewall instance. Default: 30000.
`conn_rate_threshold_low_ratio <Value>`	Configures the low threshold for connection rate, as percentage from the high threshold. Default: 80.
`conn_rate_total_threshold_high <Value>`	Configures the high threshold for connection rate (conn/sec). Accumulative for all CoreXL Firewall instances. Default: 300,000.
`conn_rate_total_threshold_low_ratio <Value>`	Configures the low threshold for connection rate, as percentage from the high threshold. Accumulative for all CoreXL Firewall instances. Default: 80.
`cpu_load_threshold_perc_high <Value>`	Configures the high threshold for CPU load (%). Default: 75.
`cpu_load_threshold_perc_low_ratio <Value>`	Configures the low threshold for CPU load, as percentage from the high threshold. Default: 80.
`hd_util_threshold_perc_high <Value>`	Configures the high threshold for hard drive utilization (%). Default: 80.
`hd_util_threshold_perc_low_ratio <Value>`	Configures the low threshold for hard drive utilization, as percentage from the high threshold. Default: 80.
`mem_util_threshold_perc_high <Value>`	Configures the high threshold for memory utilization (%). Default: 50.
`mem_util_threshold_perc_low_ratio <Value>`	Configures the low threshold for memory utilization, as percentage from the high threshold. Default: 80.
`packet_rate_threshold_high <Value>`	Configures the high threshold for packet rate (packets/sec), for each CoreXL Firewall instance. Default: 1,000,000.
`packet_rate_threshold_low_ratio <Value>`	Configures the low threshold for packet rate, as percentage from the high threshold. Default: 80.
`packet_rate_total_threshold_high <Value>`	Configures the high threshold for packet rate (packets/sec). Accumulative for all CoreXL Firewall instances. Default: 10,000,000.
`packet_rate_total_threshold_low_ratio <Value>`	Configures the low threshold for packet rate, as percentage from the high threshold. Accumulative for all CoreXL Firewall instances. Default: 80.
`throughput_threshold_high <Value>`	Configures the high threshold for throughput (bits/sec), for each CoreXL Firewall instance. Default: 3,000,000,000.
`throughput_threshold_low_ratio <Value>`	Configures the low threshold for throughput, as percentage from the high threshold. Default: 80.
`throughput_total_threshold_high <Value>`	Configures the high threshold for throughput (bits/sec). Accumulative for all CoreXL Firewall instances. Default: 30,000,000,000.
`throughput_total_threshold_low_ratio <Value>`	Configures the low threshold for throughput, as percentage from the high threshold. Accumulative for all CoreXL Firewall instances. Default: 80.