show cluster alert_threshold

This command is supported only on these:

ElasticXL Cluster
Maestro Security Group
Scalable Chassis Security Group

Note - You must run this command in Gaia gClish.

Description

Shows cluster configuration - values for alert thresholds.

Related Commands

Syntax

show cluster alert_threshold<ESC><ESC>

Parameters

Parameter	Description
`concurr_conn_threshold_high`	Shows the high threshold for concurrent connections, for each CoreXLFirewall instance.
`concurr_conn_threshold_low_ratio`	Shows the low threshold for concurrent connections, as percentage from the high threshold.
`concurr_conn_total_threshold_high`	Shows the high threshold for concurrent connections. Accumulative for all CoreXL Firewall instances.
`concurr_conn_total_threshold_low_ratio`	Shows the low threshold for concurrent connections, as percentage from the high threshold. Accumulative for all CoreXL Firewall instances
`conn_rate_threshold_high`	Shows the high threshold for connection rate (conn/sec), for each CoreXLFirewall instance.
`conn_rate_threshold_low_ratio`	Shows the low threshold for connection rate, as percentage from the high threshold.
`conn_rate_total_threshold_high`	Shows the high threshold for connection rate (conn/sec). Accumulative for all CoreXL Firewall instances.
`conn_rate_total_threshold_low_ratio`	Shows the low threshold for connection rate, as percentage from the high threshold. Accumulative for all CoreXL Firewall instances.
`cpu_load_threshold_perc_high`	Shows the high threshold for CPU load (%).
`cpu_load_threshold_perc_low_ratio`	Shows the low threshold for CPU load, as percentage from the high threshold.
`hd_util_threshold_perc_high`	Shows the high threshold for hard drive utilization (%).
`hd_util_threshold_perc_low_ratio`	Shows the low threshold for hard drive utilization, as percentage from the high threshold.
`mem_util_threshold_perc_high`	Shows the high threshold for memory utilization (%).
`mem_util_threshold_perc_low_ratio`	Shows the low threshold for memory utilization, as percentage from the high threshold.
`packet_rate_threshold_high`	Shows the high threshold for packet rate (packets/sec), for each CoreXLFirewall instance.
`packet_rate_threshold_low_ratio`	Shows the low threshold for packet rate, as percentage from the high threshold.
`packet_rate_total_threshold_high`	Shows the high threshold for packet rate (packets/sec). Accumulative for all CoreXL Firewall instances.
`packet_rate_total_threshold_low_ratio`	Shows the low threshold for packet rate, as percentage from the high threshold. Accumulative for all CoreXL Firewall instances.
`throughput_threshold_high`	Shows the high threshold for throughput (bps), for each CoreXLFirewall instance.
`throughput_threshold_low_ratio`	Shows the low threshold for throughput, as percentage from the high threshold.
`throughput_total_threshold_high`	Shows the high threshold for throughput (bits/sec). Accumulative for all CoreXL Firewall instances.
`throughput_total_threshold_low_ratio`	Shows the low threshold for throughput, as percentage from the high threshold. Accumulative for all CoreXL Firewall instances.