show cluster site-id <ID> alert_threshold

This command is supported only on:

Note - You must run this command in Gaia gClish.

Description

Shows cluster settings - thresholds for hardware alerts.

Syntax

show cluster site-id <Site ID> alert_threshold<ESC><ESC>

set cluster site-id <Site ID> alert_threshold

cpus_temperature_threshold_high

cpus_temperature_threshold_low

fans_threshold_high

fans_threshold_low

power_consumption_threshold_perc_high

power_consumption_threshold_perc_low>

Parameters

Parameter	Description
`<Site ID>`	Specifies the Site ID: `1` - Site #1 `2` - Site #2 `all` - All Sites
`cpus_temperature_threshold_high`	Shows the high threshold for CPU temperature (°C).
`cpus_temperature_threshold_low`	Shows the low threshold for CPU temperature (°C).
`fans_threshold_high`	Shows the high threshold for fans speed.
`fans_threshold_low`	Shows the low threshold for fans speed.
`power_consumption_threshold_perc_high`	Shows the high threshold for power consumption (%).
`power_consumption_threshold_perc_low`	Shows the low threshold for power consumption (%).

Related Commands