Monitoring Falcon Acceleration Cards in Gaia Portal

1

Connect with a web browser to the Gaia Portal on the Security Appliance.

2

Log in.

3

From the left tree, click Overview.

4

Examine the System Overview widget.

5

Under the appliance icon, SmartConsole shows the icons and names of the Acceleration Modules.

Example of a 15400 appliance with two Falcon-10G cards:

1

Connect with a web browser to the Gaia Portal on the Security Appliance.

2

Log in.

3

From the left tree, click Overview.

4

Examine the Network Configuration widget.

5

The names of the Network Interfaces on the acceleration cards contain (Accelerated).

Example of a 15400 appliance:

1

Connect with a web browser to the Gaia Portal on the Security Appliance.

2

Log in.

3

From the left tree, click Network Management > Network Interfaces.

4

The names of the Network Interfaces on the acceleration cards contain (Accelerated).

The type of the Network Interfaces on the acceleration cards is AC Ethernet.

Example of a 15400 appliance:

1

Connect with a web browser to the Gaia Portal on the Security Appliance.

2

Log in.

3

From the left tree, click Maintenance > Hardware Health.

4

The names of the Network Interfaces on the acceleration cards contain (Accelerated).

In the Sensor column, examine these

For the Falcon Acceleration Cards, the table shows the data from these sensors:

• Temperature of acceleration card slots (examine the <Slot#> Acceleration Card NPU Temperature).
• Fan on acceleration card (examine the <Slot#> Acceleration Card Fan Speed).
• Voltage on acceleration card (examine the <Slot#> Acceleration Card Voltage).

Example of a 15400 appliance with two Falcon cards: