delete admin-access-ipv6-address ipv6-address

In the R81.10.X releases, this command is available starting from the R81.10.00 version.

Description

Deletes an IPv6 address, from which the administrator can remotely access the appliance according to configuration.

See:

• add admin-access-ipv6-address single-ipv6-address

• add admin-access-ipv6-address network-ipv6-address

• show admin-access-ip-addresses

• delete admin-access-ipv6-address ipv6-address

• delete admin-access-ipv6-address ipv6-network

• delete admin-access-ip-address-all

Syntax

delete admin-access-ipv6-address ipv6-address <ipv6-address>

Parameters

Parameter	Description
ipv6-address	Specifies the IPv6 address

Example Command

delete admin-access-ipv6-address ipv6-address 0:0:0:0:0:ffff:c0a8:1600