add admin-access-ipv6-address network-ipv6-address

In the R81.10.X releases, this command is available starting from the R81.10.00 version.

Description

Configures an IPv6 address with a prefix, from which the administrator can remotely access the appliance according to configuration.

See:

• add admin-access-ipv6-address single-ipv6-address

• add admin-access-ipv6-address network-ipv6-address

• show admin-access-ip-addresses

• delete admin-access-ipv6-address ipv6-address

• delete admin-access-ipv6-address ipv6-network

Syntax

add admin-access-ipv6-address network-ipv6-address <network-ipv6-address> ipv6-prefix <ipv6-prefix>

Parameters

Parameter	Description
network-ipv6-address	Configures the IPv6 address of the allowed network
ipv6-prefix	Configures the IPv6 prefix of the allowed network (between 64 and 128)

Example Command

add admin-access-ipv6-address network-ipv6-address 0:0:0:0:0:ffff:c0a8:0100 ipv6-prefix 64