add admin-access-ipv6-address single-ipv6-address

In the R81.10.X releases, this command is available starting from the R81.10.00 version.

Description

Configures an IPv6 address, from which the administrator can remotely access the appliance according to configuration.

See:

• add admin-access-ipv6-address network-ipv6-address

• show admin-access-ip-addresses

• delete admin-access-ipv6-address ipv6-address

• delete admin-access-ipv6-address ipv6-network

• delete admin-access-ip-address-all

Syntax

add admin-access-ipv6-address single-ipv6-address <single-ipv6-address>

Parameters

Parameter	Description
single-ipv6-address	Configures the IPv6 address of the allowed computer

Example Command

add admin-access-ipv6-address single-ipv6-address 0:0:0:0:0:ffff:c0a8:0101