1

Back up your current configuration.

2

See the Upgrade Options and Prerequisites.

3

In R80 and above, examine the SmartConsole sessions:

1. Connect with the SmartConsole to each Domain Management Server.
2. From the left navigation panel, click Manage & Settings > Sessions > View Sessions.
3. You must publish or discard all sessions, for which the Changes column shows a number greater than zero.

   Right-click on such session and select Publish or Discard.

4

You must close all GUI clients (SmartConsole applications) connected to the source Multi-Domain Server.

5

Install the latest version of the CPUSE from sk92449.

Note - The default CPUSE does not support the required Upgrade Tools package.

1

Download the required Upgrade Tools from sk135172.

Note - This is a CPUSE Offline package.

2

Install the required Upgrade Tools with CPUSE.

See Installing Software Packages on Gaia and follow the applicable action plan for the local offline installation.

3

Make sure the package is installed.

Run this command in the Expert mode:

[Expert@MDS:0]# cpprod_util CPPROD_GetValue CPupgrade-tools-R80.30 BuildNumber 1

The output must show the same build number you see in the name of the downloaded package.

Example:

Name of the downloaded package: ngm_upgrade_wrapper_992000043_1.tgz

[Expert@MDS:0]# cpprod_util CPPROD_GetValue CPupgrade-tools-R80.30 BuildNumber 1
992000043
[Expert@MDS:0]#

1

Connect with SmartConsole to each Domain Management Server.

2

In the top left corner, click Menu > Install database.

3

Select all objects.

4

Click Install.

5

Click OK.

1

Connect to the command line on the R80.30 Multi-Domain Server.

2

Log in with the superuser credentials.

3

Log in to the Expert mode.

4

Make sure that on all Domain Management Servers, none of the required daemons (FWM, FWD, CPD, and CPCA) are in the state "down" (the "pnd" state is acceptable):

[Expert@MDS:0]# mdsstat

If some of the required daemons on a Domain Management Server are in the state "down", wait for 5-10 minutes, restart that Domain Management Server and check again. Run these three commands:

[Expert@MDS:0]# mdsstop_customer <IP Address or Name of Domain Management Server>

[Expert@MDS:0]# mdsstart_customer <IP Address or Name of Domain Management Server>

[Expert@MDS:0]# mdsstat

5

Go to the main MDS context:

[Expert@MDS:0]# mdsenv

6

Upgrade the attributes of all managed objects in all Domain Management Servers at once:

[Expert@MDS:0]# $MDSDIR/scripts/mds_fix_cmas_clms_version -c ALL

Notes:

• Because the command prompts you for a 'yes/no' for each Domain and each object in the Domain, you can explicitly provide the 'yes' answer to all questions with this command:

  [Expert@MDS:0]# yes | $MDSDIR/scripts/mds_fix_cmas_clms_version -c ALL

• You can perform this action on one Multi-Domain Server at a time with this command:

  [Expert@MDS:0]# $MDSDIR/scripts/mds_fix_cmas_clms_version -c ALL -n <Name of Multi-Domain Server>

7

Make sure that on all Domain Management Servers, none of the required daemons (FWM, FWD, CPD, and CPCA) are in the state "down" (the "pnd" state is acceptable):

[Expert@MDS:0]# mdsstat

If some of the required daemons on a Domain Management Server are in the state "down", wait for 5-10 minutes, restart that Domain Management Server and check again. Run these three commands:

[Expert@MDS:0]# mdsstop_customer <IP Address or Name of Domain Management Server>

[Expert@MDS:0]# mdsstart_customer <IP Address or Name of Domain Management Server>

[Expert@MDS:0]# mdsstat

1

Connect with SmartConsole to the R80.30 Multi-Domain Server.

2

Make sure the management database and configuration were upgraded correctly.