Installing Software Packages on Gaia

Local

You use the CPUSE (sk92449) on each Gaia computer to install the applicable packages.

Central

You use the Central Deployment Tool (sk111158) on the Management Server to deploy the applicable packages to the desired managed Security Gateways and Clusters.

Gaia computer

is connected

to the Internet

You can
perform
an on-line
installation.

1. Connect to the Gaia Portal or Gaia Clish on your Gaia computer.
2. Verify the applicable CPUSE Software Packages.
3. Download the applicable CPUSE Software Packages.
4. Install the applicable CPUSE Software Packages.

You can
perform
an offline
installation.

See the instructions for a Gaia computer that is not connected to the Internet.

Gaia computer

is not connected

to the Internet

You can
perform
only
an offline
installation.

If you plan to install CPUSE packages in Gaia Portal:

1. Use the computer, from which you connect to Gaia Portal.
2. Download the applicable CPUSE Software Packages from the Check Point Support Center:

   R80.30 Home Page SK

   Upgrade Wizard

3. Connect to Gaia Portal on your Gaia computer.
4. Import the applicable CPUSE Software Packages.
5. Verify the applicable CPUSE Software Packages.
6. Install the applicable CPUSE Software Packages.

If you plan to install CPUSE packages in Gaia Clish:

1. Use a computer to download the applicable CPUSE Offline Software Packages from the Check Point Support Center:

   R80.30 Home Page SK

   Upgrade Wizard

2. Transfer the applicable CPUSE Offline Software Packages to your Gaia computer to some directory (for example, /var/log/path_to_CPUSE_packages/).

   Make sure to transfer the packages in the binary mode.

3. Connect to Gaia Clish on your Gaia computer.
4. Import the applicable CPUSE Software Packages.
5. Verify the applicable CPUSE Software Packages.
6. Install the applicable CPUSE Software Packages.