Print Download PDF Send Feedback

Previous

Next

Installation and Configuration

In This Section:

Installing the DLP gateway

DLP Software Blade Trial License

Configuring a DLP Gateway or Security Cluster

Data Loss Prevention Wizard

Configuring a DLP Gateway in Bridge Mode

Configuring Active Directory and LDAP for DLP

Configuring a DLP Gateway for a Web Proxy

Mail Server Required Configuration

Configuring Incident Log Handling

Configuring the Exchange Security Agent

Configuring SMTP Mirror Port Mode

Configuring HTTPS Inspection

The environment must include a DNS server.

Important - Before you enable the DLP Software Blade, you must review the requirements and supported platforms for DLP in the R80.30 Release Notes.

Installing the DLP gateway

For instructions on how to install the DLP gateway, see the R80.30 Installation and Upgrade Guide.

DLP Software Blade Trial License

The DLP Software Blade has a 30 day trial license.

To activate the trial license:

  1. Select the DLP Software Blade in SmartConsole, in the gateway object.
  2. From SmartConsole, Install Policy on the DLP gateway.

During the trial period, when you install a policy on the DLP gateway, a warning message shows how many days remain until the trial license expires.

After the trial period, you must install a full DLP Software Blade license. If you do not, the DLP Software Blade stops working, and a policy cannot be installed on the DLP gateway. You must unselect the DLP Software Blade, and then you can install a policy on the gateway.