fwboot bootconf

Description

Configures Check Point boot options.

Important - Most of these commands are for Check Point use only.

Syntax

[Expert@HostName:0]# $FWDIR/boot/fwboot

bootconf <options>

corexl <options>

cpuid <options>

default <options>

fwboot_ipv6 <options>

fwdefault <options>

ha_conf <options>

ht <options>

multik_reg <options>

post_drv <options>

Parameters

Parameter	Description
`bootconf <`options`>`	Shows and configures the security boot options.
`corexl <`options`>`	Configures and monitors the CoreXL.
`cpuid <`options`>`	Shows the number of available CPUs and CPU cores on this Security Gateway.
`default <`options`>`	Loads the specified Default Filter policy on this Security Gateway.
`fwboot_ipv6 <`options`>`	Shows the internal memory address of the hook function for the specified CoreXL FW instance.
`fwdefault <`options`>`	Loads the specified Default Filter policy on this Security Gateway.
`ha_conf <`options`>`	Configures the cluster mechanism during boot.
`ht <`options`>`	Shows and configures the SMT (HyperThreading) feature (sk93000) boot options.
`multik_reg <`options`>`	Shows the internal memory address of the registration function for the specified CoreXL FW instance.
`post_drv <`options`>`	Loads the Firewall driver for CoreXL during boot.