[Expert@HostName:0]# $FWDIR/boot/fwboot ht

--core_override [<number>]

--disable

--eligible

--enable

--enabled

--supported

No Parameters

Shows the built-in help with available parameters.

--core_override [<number>]

Shows or configures the number of overriding CPU cores.

The SMT feature uses this configuration to set the number of CPU cores after reboot.

--disable

Disables the SMT feature.

--eligible

Returns a number that shows if this system is eligible for the SMT feature. Run:

[Expert@MyGW:0]# $FWDIR/boot/fwboot ht --eligible

[Expert@MyGW:0]# echo $?

• If you get 1 - The system is eligible for the SMT.
• If you get 0 - The system is not eligible for the SMT.

  The possible causes are:

  • The system is not a Check Point appliance.
  • The system does not support the SMT.
  • The system does not run Gaia OS.
  • The appliance runs Gaia OS with 32-bit kernel and has more than 4 CPU cores.

--enable

Enables the SMT feature.

--enabled

Returns a number that shows if SMT feature is enabled on this system. Run:

[Expert@MyGW:0]# $FWDIR/boot/fwboot ht --enabled

[Expert@MyGW:0]# echo $?

• If you get 1 - The SMT is enabled.
• If you get 0 - The SMT is disabled.

  The possible causes are:

  • The system does not run Gaia OS.
  • The SMT is disabled in software.

--supported

Returns a number that shows if this system supports the SMT feature. Run:

[Expert@MyGW:0]# $FWDIR/boot/fwboot ht --supported

[Expert@MyGW:0]# echo $?

• If you get 1 - System supports the SMT.
• If you get 0 - System does not support the SMT.

  The possible causes are:

  • The system's CPU does not support the SMT.
  • The SMT is disabled in the system's BIOS.
  • The SMT is disabled in software.