|
|
|
Description
Loads the Firewall driver for CoreXL during boot.
This command is to Check Point use only.
Important - If you run this command, Security Gateway can block all traffic. In such case, you must connect to the Security Gateway over a console and restart Check Point services with the cpstop and cpstart commands. Alternatively, you can reboot the Security Gateway.
Syntax
[Expert@HostName:0]# $FWDIR/boot/fwboot post_drv {ipv4 | ipv6} |
Parameters
Parameter |
Description |
|---|---|
No Parameters |
Shows the built-in help with available parameters. |
|
Loads the IPv4 Firewall driver for CoreXL. |
|
Loads the IPv6 Firewall driver for CoreXL. |
