R81.20 Jumbo Hotfix Take 119
-
This Take contains all fixes from all earlier Takes.
Take 119
Released on 27 October 2025 and declared as Recommended on 18 November 2025
|
ID |
Product |
Description |
|---|---|---|
|
Take 119 - New Functionality |
||
|
PRJ-62667, PMTR-116161 |
Gaia OS |
NEW: Hardened the authentication in the Gaia Cloning Group. Important - After the installation of this Jumbo Hotfix Accumulator Take, you must follow these steps in each current Cloning Group:
For more information, see the Gaia Administration Guide > Chapter "System Management" > Section "Cloning Group". |
|
PRJ-62142, PMTR-116780 |
CPView |
NEW: Added the new Skyline metric " |
|
Take 119 - Improvements and Resolved Issues |
||
|
PRJ-63002, PMTR-117744 |
Gaia OS |
UPDATE: Check Point response to CVE-2025-32728 - The SSH directive "DisableForwarding" fails to disable "X11 Forwarding" and "Agent Forwarding". Refer to sk183394. |
|
PRJ-59093, PRHF-37840 |
Security Management |
UPDATE: It is possible now to run the Management API command " |
|
PRJ-62340, PMTR-115295 |
CPUSE |
UPDATE: Added an HCP test to check whether the CPAC-2-100/25F, CPAC-2-100/25F-B, CPAC-2-40F-B, or CPAC-2-40F-C FW firmware is safe to update from R81.10 to a higher version. Refer to sk182403. |
|
PRJ-61801, PRHF-39531 |
Logging |
UPDATE: The SOLR process (listening on port 8211) no longer accepts connections using the TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA cipher suite. Refer to sk181683. |
|
PRJ-62728, PMTR-117738 |
Logging |
UPDATE: Improved the design of the Security Checkup report in SmartView. |
|
PRJ-62472, PMTR-117312 |
IPS |
UPDATE: HTTP/1.1 requests missing host headers are now processed by the non-compliant HTTP Protection feature (Strict Parsing option). Previously, such requests were dropped immediately. Refer to sk183569. |
|
PRJ-60141, PMTR-87460, PRJ-60463, PMTR-114416 |
SecureXL |
UPDATE: SecureXL Rate Limiting rules for DoS Mitigation now support these parameters with automatic IP range updating enabled by default:
Refer to sk112454. |
|
PRJ-61324, PRHF-39697 |
CloudGuard Network |
UPDATE: Updated supported regions in OCI (Oracle Cloud Infrastructure) data centers and changed the fetching domain logic. |
|
PRJ-63517, ODU-3040 |
Automatic Updates - CPView |
UPDATE: Added Take 201 of CPotelcol (OpenTelemetry Collector) Release Updates. Refer to sk180522. |
|
PRJ-63521, ODU-3064, PRJ-63712, ODU-3111 |
Automatic Updates - Web SmartConsole |
UPDATE: New features and improvements are released in Take 149 and Take 150 via self-updatable package. Refer to sk170314. |
|
PRJ-63781, ODU-3095 |
Automatic Updates - Policy Insights |
UPDATE: Added Take 76 of Policy Insights Release Updates. Refer to sk183421. |
|
PRJ-63899, ODU-3127 |
Automatic Updates - CPView |
UPDATE: Added Take 50 of CPquid (QUID) Release Updates. Refer to sk181458. |
|
PRJ-62243, PMTR-116383 |
Security Management |
In rare scenarios, the FWM process on the Security Management Server may unexpectedly exit, creating a core dump file because of the incorrect license update. |
|
PRJ-57301, PRHF-35813 |
Security Management |
In rare scenarios, the User Check policy is not updated during the Accelerated Policy installation. |
|
PRJ-62664, PRHF-41094 |
Security Management |
When Global Domain Assignment removal fails with the "Global Domain Assignment failed: object XXX could not be deleted because it is referenced by other objects" error, only a partial list of the referencing objects is displayed in the error message. |
|
PRJ-61897, PRHF-40211 |
Security Management |
After editing an Interoperable Device object, the number of changes of the current session presented in SmartConsole may be inaccurate. |
|
PRJ-63199, PMTR-118466 |
Security Management |
In rare scenarios, the FWM process may not start automatically after an unexpected exit. |
|
PRJ-62637, PRHF-40995 |
Security Management |
After an IPS update, reassigning global policies may take a long time. |
|
PRJ-61805, PRHF-40186 |
Security Management |
In rare scenarios, discarding an old session fails with an "An internal error has occurred" message. |
|
PRJ-59981, PRHF-38312 |
Security Management |
When migrating a Security Management Server to a Multi-Domain Security Management Server more than once, the operation fails with the "got at least one duplicate UID in requested list" error. |
|
PRJ-63489, MGMTTECH-516 |
Security Management |
Security Management Server upgrade may fail when running out of memory. |
|
PRJ-63104, PMTR-118295 |
CPView |
In a VSX environment, the CPVIEWD daemon may exit and produce a core dump file. |
|
PRJ-47565, PRHF-29330 |
CPView |
In CPView > Network > Traffic > in the Concurrent Connections table, the number of non-TCP connections is higher than shown in the output of the " |
|
PRJ-62753, PRHF-41169, PMTR-117799, PRHF-41238 |
CPView |
The CPVIEW_SERVICES process may exit because of incorrect database handling. |
|
PRJ-60004, PRHF-38733 |
Security Gateway |
Policy installation may fail when an updatable object is processed incorrectly. |
|
PRJ-61858, PRHF-40380 |
Security Gateway |
When configuring NAT64 rules for specific targets, the rules may fail to apply. Return traffic may be dropped. |
|
PRJ-61436, PRHF-39815 |
Security Gateway |
In Maestro Dual Site in the VSX VSLS mode, although CoreXL Dynamic Balancing is enabled, CoreXL does not change the number of Firewall instances and SND instances during traffic load. Refer to sk183485. |
|
PRJ-62016, PRHF-40483 |
Security Gateway |
The RAD daemon may unexpectedly exit on VSX Gateways. |
|
PRJ-59450, PRHF-38172 |
Security Gateway |
An application may fail to match correctly when URL Filtering is configured in Hold Mode. |
|
PRJ-60294, PRHF-28489 |
Security Gateway |
In rare scenarios, the Security Gateway may drop the traffic with "up_manager_fw_handle_first_packet: cmi_context_exec_with_chain_connkey() failed". Refer to sk182506. |
|
PRJ-62894, PRHF-41242 |
Security Gateway |
HTTP/2 connection may fail when Threat Prevention Software Blades are enabled with Deep Inspection because of a protocol error. Refer to sk183822. |
|
PRJ-62562, PRHF-41025 |
Security Gateway |
ICAP Server may fail to process multipart HTTP requests (when request body is split into multiple parts, each with its own headers and content). |
|
PRJ-63022, PMTR-117719 |
Threat Prevention |
In a rare scenario, the DLPU process may exit during traffic inspection when holding a connection. |
|
PRJ-58193, PRHF-37156 |
Threat Prevention |
In some scenarios, the Anti-Virus Software Blade fails to parse and load external IoC observables of type IPv6. Refer to sk182947. |
|
PRJ-61618, PRHF-40065 |
Threat Prevention |
The testing of external IoC feed connectivity from SmartConsole fails because of improper retrieval of configuration values. |
|
PRJ-60586, PRHF-38756 |
Identity Awareness |
Users on shared Servers (MUH v1 and v2) cannot access resources they should have permission to use. When this happens, the Security Gateway fails to recognize the user's identity and does not apply the correct access permissions. Refer to sk183268. |
|
PRJ-60982, PRHF-39261 |
Identity Awareness |
Entra ID (Azure ID) authorization may fail when more than one tenant is configured for authorization and the "fetch-user-group"s or "fetch-machine-groups" mode is enabled. |
|
PRJ-58058, PRHF-36813 |
IPS |
In rare scenarios, the source IP shown in the IPS detection log is invalid. Refer to sk182914. |
|
PRJ-62811, PRHF-41088 |
IPS |
When using Gateway as a Proxy "Non-transparent" and HTTPS Inspection is set to "inspect" with "X-Forward-For header", video playback on YouTube fails. |
|
PRJ-63061, PMTR-118347 |
Anti-Virus |
In a rare scenario, the Security Gateway may crash during traffic inspection. |
|
PRJ-63025, PMTR-116661 |
Anti-Virus |
In some scenarios, the Anti-Virus Software Blade reaches a timeout when inspecting Domains because of latency in the RAD daemon. |
|
PRJ-61302, PRHF-39517 |
Anti-Virus |
In a rare scenario, the memory consumption of the DLPU process continuously increases. |
|
PRJ-44982, PRHF-27785 |
Anti-Virus |
In rare scenarios, the Anti-Virus Software Blade cache may reach its capacity. |
|
PRJ-61582, PMTR-115396 |
ClusterXL |
6in4 tunnels are shown in Down state when monitored using the "cphaprob -a if" command. |
|
PRJ-62301, PMTR-115027 |
ClusterXL |
In ClusterXL High Availability (HA), in some scenarios, the Active cluster member stops sending Cluster Control Protocol (CCP) heartbeats, and the Standby member may misinterpret this as an Interface Active Check (IAC) failure. |
|
PRJ-62686, PRHF-40994 |
ClusterXL |
Modifying the number of CoreXL instances in a VSLS cluster containing three or more members causes traffic interruption on the updated Virtual System. |
|
PRJ-60348, PMTR-113063 |
ClusterXL |
In cluster environments using Bonds and VLANs, the ClusterXL Monitoring command "cphaprob stat" (Expert Mode) and the Clish command "show cluster state" may display an incorrect failover reason when an interface disconnects or a link goes down. |
|
PRJ-61109, PMTR-115083 |
ClusterXL |
A rare race condition occurs during "cpstart" command execution in VSX environments that prevents proper sync interface installation, specifically in the cluster flow process, causing synchronization problems between cluster members. |
|
PRJ-59744, PRHF-38554 |
ClusterXL |
In a ClusterXL setup, a rare performance issue may be caused by policy installation failure. |
|
PRJ-61739, PMTR-115808 |
ClusterXL |
An FWK core file is generated when configuring a Bridge Group with more than two interfaces. |
|
PRJ-63078, PMTR-118396 |
SecureXL |
In some scenarios, the DOS/Rate Limiting configuration settings may default to incorrect values during an upgrade from R81.10 to R81.20. |
|
PRJ-63769, PRHF-41893 |
SecureXL |
When VLAN interfaces are created on top of bond interfaces configured for Load Sharing, connections may not be hardware accelerated if the bond uses multiple ports from the same physical NIC. Refer to sk184291. |
|
PRJ-60627, PMTR-114633 |
SecureXL |
Memory corruption may occur in rare VPN routing scenarios. |
|
PRJ-62200, PMTR-116890 |
SecureXL |
SecureXL does not immediately send packets to the appropriate handler when it receives packets from a Virtual Router or Virtual Switch and fails to forward them to the connected Virtual System. This delay causes significant routing delays and potential routing errors on VSX Security Gateways. |
|
PRJ-62263, PMTR-109269 |
SecureXL |
The USIM core file may be generated when rebooting the Security Gateway. |
|
PRJ-60896, PMTR-111305 |
SecureXL |
When SecureXL User Mode (UPPAK) is enabled, there can be a significant latency on a Security Gateway when opening an FTP data connection. |
|
PRJ-63077, PRJ-63054 |
SecureXL |
The link on the 4-Port 10/25GbE CX7 Lightspeed Network Interface Card may fail to establish when multiple 4-port CX7 Lightspeed Network Interface Cards are installed. |
|
PRJ-63120, PMTR-118447, FMW-6167 |
SecureXL |
Large packets cause performance slowdown. |
|
PRJ-55276, PMTR-104579 |
SecureXL |
Local TCP traffic may encounter "out-of-state" connection issues. |
|
PRJ-62887, PRHF-40086 |
SecureXL |
In cluster environments, on the Active member, the USIM_x86 process may experience frequent core dumps, causing Security Gateway instability. |
|
PRJ-62587, PRHF-41038 |
CoreXL |
In rare scenarios, CoreXL Firewall instances may become fully utilized because of resource contention from the Parallel Processing Engine (PPE). Refer to sk184183. |
|
PRJ-52995, PRHF-31534 |
Routing |
In a specific scenario, where SSM static groups are configured on an interface, after a failover, these IP addresses do not appear as Outgoing Interfaces (OIFs). |
|
PRJ-63117, PRHF-41346 |
Routing |
ASE LSAs for routes sharing the same prefix but having different mask lengths may not be re-originated correctly when a topology change restores previously unreachable routes to a reachable state. |
|
PRJ-61917, PRHF-40237, PMTR-116423 |
VPN |
In VSX environments with VS and VR configurations, when Policy-Based Routing (PBR) is configured on the Virtual Router, Remote Access VPN traffic bypasses the PBR table and uses the default route instead. |
|
PRJ-60692, PMTR-114063 |
VSX |
In rare scenarios in a VSX environment, after a Virtual System (VS) starts, it becomes stuck in Down state with a "FullSync" pnote. |
|
PRJ-62227, PMTR-110683 |
VSX |
The "vsx-provisioning-tool" CLI command returns asynchronous task IDs before it is ready for monitoring, causing Terraform and similar automation tools to immediately fail when attempting to track task status. |
|
PRJ-59687, PRHF-38276 |
Gaia OS |
HealthCheck Point (HCP) reports "rx_length_errors" for Security Group Members. Refer to sk183040. |
|
PRJ-62734, PMTR-117714 |
Gaia OS |
When using Resource Separation on MDPS on Maestro, and the Security Gateway is under extreme load, policy installation fails, although the Resource Separation should handle the load. |
|
PRJ-62584, PRHF-41027 |
Gaia OS |
The Security Management Server hangs during a Backup operation because of endless SSH handshake retry, making it impossible to access via SSH or CLI. |
|
PRJ-63583, PRHF-41381 |
Gaia OS |
SNMP query for "vsxStatusInterfaceRxBytes" and "vsxStatusInterfaceTxBytes" OIDs returns "0". Refer to sk183871. |
|
PRJ-62996, PRHF-41344 |
Gaia OS |
The "show syslog logs" Clish command returns the "cat: /var/log/messages*: No such file or directory" error even though these files exist. |
|
PRJ-62797, PRHF-41139 |
CloudGuard Network |
In the Smart-1 Cloud environment, in the Gateways & Servers view, newly provisioned CloudGuard Autoscaling Security Gateways may be shown as disconnected. |
|
PRJ-62819, PMTR-103009 |
SD-WAN |
In rare scenarios, SD-WAN policy installation may fail during a Security Gateway reboot. |
|
PRJ-62408, PMTR-117173 |
Scalable Platforms |
Security Group members may reboot because of cp-nano database entries. The /var/log/configuration_reboot_reason.log may show "process:cp-nano-watchdog" when database entries exist only on the local member or only on the SMO member. |
|
PRJ-58049, PRHF-37015 |
Scalable Platforms |
When handling multiple shared uplinks across numerous interfaces, errors related to LACP bond uplink updates may be printed in logs. |
|
PRJ-62175 |
Scalable Platforms |
A "failed to load external entity "/etc/extended_commands/lightshot_partition_extended_cli.xml" message may be printed in console during boot. |
|
PRJ-62803, PMTR-117683 |
Scalable Platforms |
In Maestro Security Group or Scalable Chassis Security Group with VSX with many Virtual Systems (VSs), boot may take a long time when the database file (/config/active) is very large (200,000 lines or more). |
|
PRJ-58374, PMTR-110163 |
Scalable Platforms |
In rare scenarios, Security Group members may fail to receive their Gaia database from the Single Management Object (SMO). When this occurs, gClish commands related to these missing Security Group configurations may fail. |
|
PRJ-47991, PMTR-91235 |
Scalable Platforms |
If L4 is disabled, the data connection may be dropped if it is redirected to a different IP address than the control connection. |
|
PRJ-59790, PMTR-105687 |
Scalable Platforms |
On the Mobile Access Portal, SAML authentication does not display the login fields in a Maestro Security Group in the VSX. Refer to sk182548. |
|
PRJ-48418, PRHF-23287 |
Scalable Platforms |
After adding a custom command in Gaia gClish with the "add command", the custom command is available only on the Single Management Object (SMO). Refer to sk178671. |
|
PRJ-59938, PRHF-38620 |
Carrier Security |
Security Gateway drops GTP traffic with the log "Message includes unexpected information element type". Refer to sk106469. |