List of All Resolved Issues and New Features in R81.20 Jumbo Hotfix Accumulator
-
Review the Critical Information section before installing a new Take.
Search in all Takes:
Take 173
Released on 12 October 2026
|
ID |
Product |
Description |
|---|---|---|
|
Take 173 - Improvements and Resolved Issues |
||
| PRJ-69919 PMTR-129145 |
Security Management | UPDATE: JRE is updated from version 8.0_8.60 to version 8.0_8.65. |
| PRJ-64484 FMW-6423 |
Security Gateway | UPDATE: Added the ability to include the X-Request-ID header in RAD requests, enhancing troubleshooting and traceability. |
| PRJ-67324 PMTR-125405 |
VPN | UPDATE: Hardened brute-force protection for Capsule VPN Remote Access authentication. |
| PRJ-70220 PMTR-129591 |
VPN | UPDATE: Hardened brute-force protection for IKEv2 Remote Access authentication. |
|
PRJ-72302 ODU-4721 |
Automatic Updates |
UPDATE: Added Take 179 of Web SmartConsole. Refer to sk170314. |
|
PRJ-72393 ODU-4714 PRJ-71882 ODU-4664 |
Automatic Updates |
UPDATE: Added Take 100 and Take 101 of Policy Insights Release Updates. Refer to sk183421. |
| PRJ-72502 ODU-4636 |
Automatic Updates | UPDATE: Added Take 235 of Connecting Management Server to Check Point Portal Release Updates. Refer to sk177205. |
|
PRJ-72596 ODU-4882 |
Automatic Updates |
UPDATE: Added Take 42 of CPM Doctor Release Updates. Refer to sk171505. |
|
PRJ-72406 ODU-4612 |
Automatic Updates |
UPDATE: Added Take 232 of OpenTelemetry Collector (CPotelcol) Release Updates. Refer to sk180522. |
|
PRJ-72403 ODU-4619 |
Automatic Updates |
UPDATE: Added Take 99 of OpenTelemetry CPviewExporter Release Updates. Refer to sk180521. |
|
PRJ-71874 ODU-4643 |
Automatic Updates |
UPDATE: Added Take 96 of HealthCheck Point (HCP) Release. Refer to sk171436. |
|
PRJ-72412 ODU-4626 |
Automatic Updates |
UPDATE: Added Take 156 of OpenTelemetry Agent (OtlpAgent) Release Updates. Refer to sk181615. |
|
PRJ-72271 ODU-4728 |
Automatic Updates |
UPDATE: Added Take 326 of CME (Cloud Management Extension) for Cloud Firewall Release Updates. Refer to sk157492. |
|
PRJ-67334 PMTR-125404 |
Security Management |
In a Multi-Domain Security Management Server environment, the FWM daemon at the MDS level may fail to start when TCP port 18190 is bound to more than one IP address. |
|
PRJ-69411 PRHF-45782 |
Security Management |
In some scenarios, upgrading a Security Management Server may fail during the database import with a "Failed to parse the upgrade data" error if the environment contains more than 32K IPS protections. |
|
PRJ-71465 PRHF-47401 |
Security Management |
Users may be unable to log in to a domain using the
|
|
PRJ-65464 PRHF-42980 |
Logging |
The CPSEMD process may unexpectedly exit when the Security Management Server is restarted. |
|
PRJ-67934 PRHF-45055 |
Logging |
In some scenarios, the system may not correctly report SOLR index deletion
results in the |
|
PRJ-62331 PRHF-40738 |
Logging |
In some scenarios, the SMARTLOG_SERVER process may unexpectedly exit and generate a core dump. |
|
PRJ-69285 PRHF-45700 |
Logging |
In some scenarios, the LOG_INDEXER process may crash unexpectedly when multiple log server connections are active, and one of the connections is disconnected. |
|
PRJ-61855 PRHF-40192 |
Logging |
In some scenarios, a redundant "CPSEMD low disk space notification" message may appear despite ample free disk space. |
|
PRJ-68159 PRHF-44996 |
Security Gateway |
In some scenarios, softlockups may occur during the dynamic objects update process. Refer to sk184887. |
|
PRJ-67894 FMW-8845 |
Security Gateway |
Optimized the shared memory management, which in some scenarios may impact CPU utilization. |
|
PRJ-66696, PRA-5192 |
Security Gateway | In rare scenarios, when an HTTPS connection is in bypass mode, it may match a Captive Portal rule without being redirected to the portal. |
|
PRJ-72171 PRHF-47698 |
Security Gateway |
Websites returning large HTTP/2 response headers may fail to load when HTTPS Inspection is enabled. |
|
PRJ-70304 PRHF-46417 |
Security Gateway |
In some scenarios, servers sent compressed data with |
|
PRJ-70741 PRHF-46695 |
Security Gateway |
Improved HTTP/2 flow-control handling to prevent the dropping of legitimate long-lived connections to AI assistant tools. |
|
PRJ-71665 PMTR-127891 |
Security Gateway |
VPN traffic may generate excessive debug messages containing
|
|
PRJ-71369 PRHF-47526 |
Security Gateway |
Google reCAPTCHA failed to load in Firefox with HTTPS Inspection enabled. Refer to sk185265. |
|
PRJ-58913 PRHF-36812 |
Security Gateway |
In some scenarios, the Identity Awareness Gateway may fail to communicate with the LDAP Server. The "Couldn't create connection (err=5): Cannot assign requested address" LDAP leak disrupts authentication and ldapsearch" error is displayed. Refer to sk182952. |
|
PRJ-58158 PRHF-37101 |
Identity Awareness |
The identity deletion process returned an incorrect error message "HTTP 500: GENERIC_INTERNAL_ERROR ... Failed to send disassociation to PDP" even though the identity was successfully removed from the database. |
|
PRJ-69619 PRHF-45953 |
IPS |
Improved handling of rejected HTTP/2 cleartext (h2c) upgrade attempts to ensure connections recover gracefully and prevent inconsistent failure states. |
|
PRJ-64263 PRHF-41806 |
ClusterXL |
In scenarios involving asymmetric traffic, where the same connection tuple is reused frequently, connections may be dropped and flagged as "out of state". Refer to sk184181. |
|
PRJ-62833 PRHF-41024 |
SecureXL |
Adding SecureXL Rate Limiting rule with country codes fails on VSX. Refer to sk183992 and sk112454. |
|
PRJ-71386 PRHF-47560 |
Gaia OS |
Check Point Process Manager (PM daemon) fails to correctly monitor the DNSMASQ process. |
|
PRJ-69180 PMTR-123379 |
Gaia OS |
During a clean installation or when running |
| PRJ-72721 PMTR-132662 |
Gaia OS | In some scenarios, RADIUS authentication fails when processing overly long credentials during login. |
|
PRJ-70083 PMTR-122832 |
Gaia OS |
Upgrading a Scalable Group in Traditional VSX or VSNext mode may fail if the Jumbo Hotfix Accumulator package is not installed on both the Security Management Server and the Scalable Group. |
|
PRJ-70520 PRHF-46560 |
VPN |
In some scenarios, Site-to-Site VPN tunnel against 3rd-party flaps every 2 minutes. |
|
PRJ-71728 ODU-4584 CGNSIS-2611 |
Cloud Firewall |
In some scenarios, Cloud Firewall Controller fails to fetch NSGroup content and may delete the group IP addresses. |
|
PRJ-70243 PRHF-46338 |
Scalable Platforms |
In rare scenarios, invalid site count values in Maestro dual-site Security Groups may cause cluster flapping and traffic impact. |
|
PRJ-71213 PMTR-129898 |
Scalable Platforms |
Contracts downloaded from the User Center by a Security Group Member may get deleted after Policy Installation because the SMO member's contract file overwrites the member's local file. |
|
PRJ-71482 PRHF-46898 |
Scalable Platforms |
When enabling the Maestro Fastforward feature, ARP checks may fail on non-SMO members during activation. |
Take 170
Released on 22 September 2026
|
ID |
Product |
Description |
|---|---|---|
|
Take 170 - Improvements and Resolved Issues |
||
|
PRJ-72485, PMTR-132461 |
Security Management |
UPDATE: Resolved CVE-2026-91843: Stack overflow in login process to the Security Management and Log servers. Refer to sk1000155. |
|
PRJ-72643, PRJ-72654, PRJ-71403, PMTR-131125, PMTR-132648, PMTR-132636 |
Security Management |
UPDATE: Resolved CVE-2026-93616: Directory Traversal and File upload allows execution of arbitrary script on the Management Server. Refer to sk1000171. |
Take 166
Released on 09 September 2026
|
ID |
Product |
Description |
|---|---|---|
|
Take 166 - New Functionality |
||
|
PRJ-70075, PMTR-129515 |
Security Management |
NEW:Introducing the "show-ad-content" Management API, which enables the retrieval of users, groups, and machines from Active Directory. |
|
Take 166 - Improvements and Resolved Issues |
||
|
PRJ-71614, ODU-4598, PRJ-71130, ODU-4470 |
Automatic Updates - Web SmartConsole |
UPDATE: New features and improvements are released in Take 177 and Take 178 of Web SmartConsole. Refer to sk170314. |
|
PRJ-71255, ODU-4492 |
Automatic Updates - HCP |
UPDATE: Added Take 95 of HealthCheck Point (HCP) Release Updates. Refer to sk171436. |
|
PRJ-68590, PMTR-127145 |
Automatic Updates - HCP |
UPDATE: The HCP configuration sync verifier (the |
|
PRJ-71382, ODU-4591, PRJ-71259, ODU-4477 |
Automatic Updates - Policy Insights |
UPDATE: Added Take 97 and Take 98 of Policy Insights Release Updates. Refer to sk183421. |
|
PRJ-71266, ODU-4463 |
Automatic Updates - CloudGuard Network |
UPDATE: Added Take 38 of CloudGuard Controller Release Updates. Refer to sk181842. |
|
PRJ-71264, ODU-4484 |
Automatic Updates - CloudGuard Network |
UPDATE: Added Take 325 of CME (Cloud Management Extension) Release Updates. Refer to sk157492. |
|
PRJ-60266, PRHF-38897 |
Gaia OS |
UPDATE: Gaia Cloning Group synchronization (port 1129) now uses updated and more secure SSL/TLS versions for internal communication. Refer to sk182091. |
|
PRJ-69074, PRHF-45246 |
Gaia OS |
UPDATE: Added support for passwords containing the ampersand "&" character, which previously caused failures in scheduled backup operations. |
|
PRJ-62162, PRHF-40230 |
VPN |
UPDATE: Added support for treating trusted CA certificates with non-compliant attributes as valid. This includes certificates with incorrect Key Usage settings or missing Basic Constraints, based on customer-defined configurations. Refer to sk183800. |
|
PRJ-71486, PMTR-131442 |
VPN |
UPDATE: Resolved CVE-2026-85102 - Authentication Bypass and Remote Code Execution in Remote Access and Site-to-Site VPN. Refer to sk1000117. |
|
PRJ-71552, PMTR-131527 |
VPN |
UPDATE: Resolved CVE-2026-85103 - ASN.1 decoding heap overflow leading to a remote code execution. Refer to sk1000118. |
|
PRJ-70386, PMTR-129271 |
Security Management |
SmartConsole may display a "No communication" error message caused by a file descriptor leak in the FWMHA process after prolonged uptime. |
|
PRJ-67754, PRHF-44852 |
Security Management |
Policy installation may fail when custom authentication *.ttm files are not included during policy package preparation, resulting in a "No such file or directory" error message. |
|
PRJ-67494, PRHF-44700 |
Security Management |
In rare scenarios, the accumulation of large API request-status files could cause Security Management Server slowness. |
|
PRJ-58526, PRHF-37141 |
Security Management |
In some scenarios, policy state directories are synced between active and standby Security Management Servers causing high disk space utilization. |
|
PRJ-63510, PRHF-41422 |
Security Management |
The " |
|
PRJ-67852, PRHF-45034 |
Security Management |
In rare scenarios, login to SmartConsole may fail due to a timeout. |
|
PRJ-67759, PRHF-44799 |
Security Management |
Improved debug logging in the $FWDIR/log/cpm.elg file during upgrades of a Multi-Domain Security Management Server. |
|
PRJ-62522, PRHF-40980 |
Security Management |
On a Multi-Domain Security Management Server, the " |
|
PRJ-66785, PRHF-43884 |
Security Management |
In SmartConsole, a network object that is no longer referenced by any policy may fail to be deleted with an "object is being used" error message. |
|
PRJ-67762, PRHF-44772 |
Security Management |
In rare scenarios, deleting a Secondary Security Management Server fails because it references objects that no longer exist. |
|
PRJ-69863, PRHF-45625 |
Security Management |
When one administrator installs a policy, other logged-in administrators may see an "Error retrieving results" message in the Tasks window instead of the policy installation progress. |
|
PRJ-69860, PRHF-46038 |
Security Management |
Administrators logging into SmartConsole with certificate authentication at the MDS level using the " |
|
PRJ-70232, PRHF-45998 |
Security Management |
In some scenarios, when a Multi-Domain Security Management Server is connected to the Check Point Portal, a connectivity failure warning for the Global SmartEvent server may appear, even though Global SmartEvent servers are not supported in the Check Point Portal. |
|
PRJ-67612, PRHF-44583 |
Security Management |
In a Management High Availability environment, the statuses of clusters and cluster members may be displayed incorrectly on the secondary Security Management Server. |
|
PRJ-67413, PMTR-125556 |
Security Management |
The Management Rest API show-global-properties fails when there is a database inconsistency for the 'keep-hit-count-data-up-to' field. |
|
PRJ-67811, PMTR-126383 |
Security Management |
Disk space on the Security Management Server may become depleted due to the excessive growth of internal PostgreSQL database tables. |
|
PRJ-69441, PRHF-45656 |
Security Management |
Accelerated policy installation may be skipped if Compliance generates a high number of audit log entries between sessions. |
|
PRJ-67775, PMTR-126316 |
Security Management |
Snort IPS protections are not downloaded to the local domain during Global Policy Assignment. |
|
PRJ-69186, PRHF-45542 |
Security Management |
When generating a Show Changes PDF report for a workflow or session, the report could include internal system changes, such as IPS protection changes, that were not performed by the user. |
|
PRJ-68286, PRHF-44951 |
Security Management |
Policy objects may fail to open in Web SmartConsole with a "Something went wrong" error message. |
|
PRJ-70411, PRHF-46322 |
Security Management |
In an environment with multiple Multi-Domain Security Management (MDS) Servers, High Availability synchronization between MDSs may intermittently fail with the "NGM failed to import data" error message because of missing VSEC license objects in the secondary MDS database. |
|
PRJ-60815, PRHF-39436 |
Multi-Domain Management |
When logging in to SmartUpdate on a Multi-Domain Security Management Server, domain licenses may not appear in the Domain Licenses view. |
|
PRJ-68525, PRHF-45066 |
SmartProvisioning |
When running the |
|
PRJ-58114, PMTR-129439 |
Logging |
UPDATE: Added support for displaying the Member ID field in the Logs view through Edit Profile > Columns Profiles. |
|
PRJ-67344, PRHF-44310 |
Logging |
In rare scenarios, the LOG_INDEXER process may crash unexpectedly due to improper memory handling. |
|
PRJ-69985, PRHF-46185 |
Logging |
When viewing logs in the Check Point Portal, a "Query failed" error message may intermittently appear for several minutes. |
|
PRJ-68883, PRHF-45417 |
Logging |
Exporting logs that contain "ampersand" in their fields to a CSV file via SmartView web application may fail with a "Failed to export" error message. |
|
PRJ-57166, PRHF-36102 |
Logging |
When viewing Forensics Reports in SmartView through the Check Point Portal, non-ASCII characters may appear distorted. |
|
PRJ-69245, PRHF-45525 |
Logging |
When right-clicking the "*_interface" field in the SmartView Logs web view and selecting Add as Filter, the query may fail, resulting in no logs being displayed. |
|
PRJ-61606, PRHF-40126 |
Security Gateway |
Custom trap for BGP isn't working on MDPS when BGP is configured in data plane. |
|
PRJ-47870, PRHF-29668 |
Security Gateway |
In rare scenarios, when processing TLS traffic and attempting to return an error page, the FWK process may crash. |
|
PRJ-66834, PRHF-43754 |
Security Gateway |
In some scenarios, CPView may display an incorrect value for CPU user time. Refer to sk184722. |
|
PRJ-67914, PRHF-41891 |
Security Gateway |
In some scenarios, the Security Gateway may not close connections properly when a device stops responding during an active download, leading to a gradual memory leak over time. |
|
PRJ-67800, PRHF-45012 |
Security Gateway |
When a user configures NAT to convert a connection's destination IP address from unicast to multicast, the Security Gateway may transmit packets with an incorrect MAC address when SecureXL is enabled. |
|
PRJ-69499, PRHF-40443 |
Security Gateway |
In some cases, an ICAP server closing the connection to an ICAP client with an RST may cause an FWK process crash. |
|
PRJ-58566, PRHF-26696 |
Security Gateway |
In some cases, the Captive Portal fails to authenticate users when SAML authentication is enabled. |
|
PRJ-64877, SMBGWY-16234 |
Security Gateway |
Improved connectivity for LSV peer traffic after an ISP failover. |
|
PRJ-62559, PRHF-40560 |
Security Gateway |
Enhanced stability when manual edits to the fwkern.conf file result in a malformed configuration. To manage the file, it is recommended to use the Refer to sk184081. |
|
PRJ-66264, PRHF-43044 |
Security Gateway |
The FWK process may restart unexpectedly due to improper handling of a connection. |
|
PRJ-69101, PRHF-45611 |
Security Gateway |
The RAD daemon may unexpectedly exit on VSX Gateways. |
|
PRJ-66555, PRHF-43835 |
Security Gateway |
In rare scenarios, a Security Gateway may crash when LSP (Link State Propagation) is enabled. |
|
PRJ-66298, PRHF-43833 |
Security Gateway |
The FWK process may unexpectedly restart because of an incorrect integration with CPView. |
|
PRJ-67538, PRHF-44757 |
Security Gateway |
In some scenarios, multicast traffic and a race condition during route lookup may lead to a crash in the Security Gateway. |
|
PRJ-65676, SWSCFG-654 |
Security Gateway |
The PDPD daemon may encounter high CPU utilization when Nested Groups query method 5 (query by SIDs) is in use. Refer to sk183748. |
|
PRJ-67416, PMTR-124725 |
Security Gateway |
In some scenarios, the ICAP Server may crash because of memory issues. |
|
PRJ-71457, PRHF-47521 |
Security Gateway |
In some scenarios, users can connect to Mobile Access/SSL Network Extender, but do not have access to internal resources after upgrading. Refer to sk185260. |
|
PRJ-69204, PRHF-45101 |
Security Gateway |
In some scenarios, Spike Detective file descriptors may remain undeleted. |
|
PRJ-70510, PMTR-130005 |
Threat Prevention |
In certain scenarios, the Security Gateway may fail to apply a new GeoIP database update. |
|
PRJ-69947, PRHF-46128 |
Threat Prevention |
The Anti-Virus may fail to load external IOC feeds that contain URL-type observables. |
|
PRJ-65679, PRHF-43309 |
Threat Emulation |
Files without extensions were receiving a Scan Pass verdict from the ICAP server. As a result, malicious files without extensions were also assigned a Scan Pass verdict, which ultimately led to a Benign classification. |
|
PRJ-55782, PRHF-34201 |
Identity Awareness |
In some scenarios, errors in rule number calculation prevented packet tagging from working. |
|
PRJ-69215, PRHF-39546 |
Identity Awareness |
Improved handling of duplicate Identity Collector events on the PDP Security Gateway. |
|
PRJ-65132, PRHF-42745 |
URL Filtering |
An HTTPS Inspection rule that contains a custom application whose name includes spaces or certain unsupported characters does not match during policy enforcement. Refer to sk184773. |
|
PRJ-64167, PMTR-118916 |
IPS |
Enforced compliance with the HTTP RFC by requiring a "/" in the request path for non-proxy HTTP connections, except for the CONNECT and OPTIONS methods. Traffic that does not meet this requirement will be dropped if "Non-Compliant HTTP" is set to "Drop" and "Strict Request Parsing" is enabled. |
|
PRJ-67473, PRHF-44623 |
SSL Inspection |
In some scenarios, a memory leak may occur in the WSTLSD process when it fails to decode a certificate. |
|
PRJ-67476, PRHF-44630 |
SSL Inspection |
Certificate validation may fail for certificates containing an ASN.1 NumericString in the X.509 Subject attribute. |
|
PRJ-66072, PRHF-43570 |
SecureXL |
In rare scenarios, a performance issue may occur when a policy is installed on multiple Virtual Systems simultaneously. Refer to sk184585. |
|
PRJ-55338, PRHF-33964 |
SecureXL |
In some scenarios, the Security Gateway may not properly remove closed TCP connections, processed through Active Streaming, from its accelerated connections table if a new security policy was installed beforehand. |
|
PRJ-67116, PMTR-120253 |
SecureXL |
In some scenarios, the VSX Gateway may experience significant latency when passing traffic between Virtual Systems through a Virtual Router. |
|
PRJ-67268, PMTR-125173 |
SecureXL |
In some scenarios, the Security Gateway may restart unexpectedly when passing traffic through LightSpeed hardware acceleration interfaces with SecureXL User Mode enabled. |
|
PRJ-70357, PMTR-127257 |
SecureXL |
In some scenarios, the VSX Gateway may not properly assign CPUs to a Firewall instance or SND after booting up when SecureXL User Mode is enabled. |
|
PRJ-70343, PRHF-46357 |
SecureXL |
In some scenarios, VLAN tags are stripped and MAC addresses become malformed after traffic passes through the bridge. Refer to sk185101. |
|
PRJ-67771, PMTR-119674 |
SecureXL |
In some scenarios, the VSX Gateway may experience poor performance when passing traffic between Virtual Systems through a Virtual Switch with SecureXL User Mode enabled. |
|
PRJ-70927, PRHF-46835 |
SecureXL |
In certain scenarios, the VSX Gateway may transmit packets with incorrect MAC addresses for cleartext connections when SecureXL is enabled, specifically when these packets are sent through a Virtual Router or Virtual Switch. |
|
PRJ-66860, PMTR-124252 |
SecureXL |
In some scenarios, the VSX Gateway may unexpectedly restart when passing traffic through a Virtual Switch with SecureXL User Mode enabled. |
|
PRJ-58856, PMTR-110610 |
SecureXL |
Multicast routes may not update or respond correctly to changes in the network. |
|
PRJ-69942, PMTR-127433 |
SecureXL |
In some scenarios, VPN packets are dropped in User Mode (UPPAK) during encryption when QoS is active. |
|
PRJ-70273, PRHF-45730 |
SecureXL |
A rare scenario handling Jumbo Frames of specific sizes on Intel-based NICs may trigger a driver internal protection (MDD) error, potentially impacting performance or connectivity. |
|
PRJ-69551, PRHF-45732 |
Gaia OS |
Performance improvements have been made to the VSX interface configuration process. |
|
PRJ-70122, PRHF-45729 |
Gaia OS |
When syslog messages are forwarded to the Security Management Server using the |
|
PRJ-69253, PMTR-126101 |
Gaia OS |
In some scenarios, the Security Gateway may fail to access interface data correctly when SecureXL User Mode is enabled. |
|
PRJ-66701, PRHF-43888 |
Gaia OS |
Duplicate interface configuration entries appear in the |
|
PRJ-66894, PRHF-44101 |
Gaia OS |
In some scenarios, duplicate interface entries appear in the output of the |
|
PRJ-68604, PRHF-44741 |
Gaia OS |
In rare scenarios, the Security Gateway may unexpectedly crash due to timer corruption. |
|
PRJ-71372, PRHF-47549 |
Gaia OS |
Two-Factor Authentication (2FA) configurations are now preserved during upgrades to a newer R81.20 Jumbo version. |
|
PRJ-68555, PRHF-44964 |
Gaia OS |
Two-Factor Authentication (2FA) initial setup may not be triggered via the Gaia Portal on Scalable Platforms. |
|
PRJ-71811, PRJ-71815 |
Gaia OS |
After you install the R81.20 Jumbo Hotfix Accumulator Take 158 or Take 161 on the Maestro Orchestrator:
|
|
PRJ-58308, PRHF-37219 |
Gaia OS |
The lower bottom threshold for the PCH-Vin sensor on Check Point Firewall 9700 appliances was set incorrectly. |
|
PRJ-69940, ROUT-2627 |
Routing |
The ROUTED process may crash when more than 250 interfaces are configured and then deleted. |
|
PRJ-69977, PRHF-45943 |
Routing |
In some scenarios where the SPT cannot be set on an entry with the Decap bit enabled, the Decap bit is now reset to ensure that incoming Register packets can be processed. |
|
PRJ-60408, TPDO-4412 |
Routing |
Certain standard IPv6 addresses may have been incorrectly identified as multicast addresses. |
|
PRJ-68693, PRHF-45292 |
Traditional VSX |
In rare scenarios, a crash may occur in Traditional VSX during a call to |
|
PRJ-67298, PRHF-44576 |
Mobile Access |
The Mobile Access Blade portal may not function properly with web applications that set HTTP cookies containing the pipe ('|') character in their values. |
|
PRJ-65401, PMTR-122348 |
VPN |
Improved stability for Permanent Tunnel functionality when using Tunnel Test UDP/18234 in Maestro environments. |
|
PRJ-70688, PRHF-46758 |
VPN |
Capsule Connect / VPN users are unable to log in and receive the error message "Client's configuration is not verified". Refer to sk185144. |
|
PRJ-66854, PRHF-44039 |
VPN |
vpnd keeps crashing after downgrading from R81.20 JHF 122 to R81.20 JHF 120 |
|
PRJ-69266, PRHF-45001 |
VPN |
In some scenarios, the VPN tunnel flaps every 40 seconds when the in-kernel tunnel test is enabled. |
|
PRJ-70125, PMTR-128909 |
VPN |
Added Layer Two Tunneling Protocol (L2TP) stabilization improvement. |
|
PRJ-66900, PMTR-123203 |
VPN |
EDPC tunnel establishment failure after MEP failover to a new Security Gateway. |
|
PRJ-67858, PRHF-44977 |
VPN |
In rare scenarios between an LSM Central Gateway and an LSM Satellite Gateway, the Route Injection Mechanism (RIM) may not function correctly. |
|
PRJ-70104, PMTR-128918 |
VPN |
Improved stability in VPN tunnel monitoring workflows. |
|
PRJ-70113, PMTR-128876 |
VPN |
Improved stability and robustness in VPN session message handling during connection flows. |
|
PRJ-70045, PMTR-128892 |
VPN |
Enhanced stability and reliability in IKEv2 certificate handling. |
|
PRJ-70580, PRHF-46735 |
VPN |
In rare scenarios, the VPND process may crash during Capsule VPN connections that use Mobile Device Management (MDM) compliance and certificate-based authentication. |
|
PRJ-70108, PMTR-128831 |
VPN |
Enhanced stability in IKEv2 session establishment. |
|
PRJ-70271, PRHF-46350 |
VPN |
In some scenarios with DAIP peers, VPN tunnel tests may fail, causing intermittent disruptions. |
|
PRJ-65020, SDWANGW-2726 |
SD-WAN |
In some scenarios, when the Symmetric Packet Return feature is enabled and kernel debug is running, the |
|
PRJ-70118, CGNSIS-2240 |
Cloud Firewall |
Nightly distribution may fail when no default license pool is set. The system now automatically promotes an available pool during distribution. |
|
PRJ-70061, PMTR-129147 |
Cloud Firewall |
Reinstalling a Cloud Firewall central license with a regenerated signature may create a duplicate entry in the Management Server's license repository, which could prevent license distribution to managed Security Gateways. The Management Server now detects such conflicts and blocks the installation to avoid creating duplicates. |
|
PRJ-70377, PMTR-129571 |
Cloud Firewall |
The |
|
PRJ-70186, PMTR-130643 |
Scalable Platforms |
Network Time Protocol (NTP) may stop functioning after an upgrade. |
|
PRJ-70917, PRJ-70923 |
Scalable Platforms |
After uninstalling an upgrade, the permissions on the $SMODIR/lib directory and related libraries may become more restrictive than required. As a result, the Gaia Portal fails to load pages. Refer to sk185178. |
|
PRJ-61934, PMTR-108858 |
Scalable Platforms |
In rare scenarios, a full sync may fail to occur after a reboot because the sync is triggered before the full sync request is completely registered. |
Take 161
Released on 03 Aug 2026
|
ID |
Product |
Description |
|---|---|---|
|
Take 161 - Improvements and Resolved Issues |
||
|
PRJ-71273, PMTR-131093 |
Security Management |
UPDATE: Resolved CVE-2026-18574 - Management Authentication Bypass. Refer to sk185222. |
|
PRJ-71203, PRHF-47279 |
Gaia OS |
DNS may stop working after upgrading to R81.20 Jumbo Hotfix Accumulator Take 158. Refer to sk185210. |
Take 158
Released on 22 July 2026
|
ID |
Product |
Description |
|---|---|---|
|
Take 158 - New Functionality |
||
|
PRJ-67020, PMTR-124959 |
Security Management |
NEW: Added a new Management API command to retrieve an entire Access Control Layer (including inline layers) - " |
|
PRJ-69423, PRHF-45847 |
Scalable Platforms |
NEW: Added a configuration option for Maestro Orchestrator to forward Spanning Tree Protocol (STP) BPDUs to Maestro Security Group Members. Refer to sk185110. |
|
Take 158 - Improvements and Resolved Issues |
||
|
PRJ-70599, PMTR-129991 |
Gaia OS |
UPDATE: Resolved CVE-2026-62145 - Local privilege escalation in Gaia Portal. Refer to sk185153. |
|
PRJ-70486, PMTR-129956 |
Security Management |
UPDATE: Resolved CVE-2026-62144 - Management Authentication Bypass and Privilege Escalation. Refer to sk185152. |
|
PRJ-70934, PMTR-130686 |
Security Management |
UPDATE: Resolved CVE-2026-16232 - Authentication bypass with SmartConsole login process using application token. Refer to sk185169. |
|
- |
- |
This Jumbo Hotfix Accumulator Take provides additional Management and Gateway hardening fixes, including VPN Site to Site and Remote Access. |
|
PRJ-69641, ODU-4190 |
Automatic Updates - Security Management |
UPDATE: Added Take 89 and Take 90 of the AutoUpdater Utility. Refer to sk165653. |
|
PRJ-69417, ODU-4204, PRJ-70010, ODU-4253, PRJ-70565, ODU-4316 |
Automatic Updates - Web SmartConsole |
UPDATE: New features and improvements are released in Take 171, Take 173, and Take 176 of Web SmartConsole. Refer to sk170314. |
|
PRJ-69644, ODU-4086, PRJ-70602, ODU-4337 |
Automatic Updates - Log Exporter |
UPDATE: Added Take 65 and Take 70 of Log Exporter Auto Update Deployment. Refer to sk182866. |
|
PRJ-69638, ODU-4225, PRJ-66381, ODU-3435, PRJ-70663, ODU-4330 |
Automatic Updates - Policy Insights |
UPDATE: Added Take 80, Take 82, Take 87, Take 94, and Take 96 of Policy Insights Release Updates. Refer to sk183421 |
|
PRJ-69587, ODU-4093 |
Automatic Updates - Smart-1 Cloud |
UPDATE: Added Take 13 and Take 75 of Smart-1 Cloud MaaS Tunnel. Refer to sk166056. |
|
PRJ-69572, ODU-4218 |
Automatic Updates - HCP |
UPDATE: Added Update 28 of HealthCheck Point (HCP) Release. Refer to sk171436 |
|
PRJ-70143, ODU-4232, PRJ-69583, ODU-4169 |
Automatic Updates - CPView |
UPDATE: Added Take 57 and Take 59 of CPquid (QUID) Release Updates. Refer to sk181458. |
|
PRJ-65594, HEC-1347 |
Automatic Updates - HCP |
UPDATE: Added a new HCP test that analyzes load balancing and NAT utilization, and suggests optimal distribution adjustments accordingly. Refer to sk171436. |
|
PRJ-70685, ODU-4351 |
Automatic Updates - HCP |
UPDATE: Added Take 94 of HealthCheck Point (HCP) Release. Refer to sk171436 |
|
PRJ-68746, ODU-4030 |
Automatic Updates - Threat Prevention |
UPDATE: Added Update 28 of Autonomous Threat Prevention Management Integration Release. Refer to sk167109. |
|
PRJ-67356, PRHF-43660 |
Security Management |
UPDATE: JRE is updated from version 8.0_8.50 to version 8.0_8.60. |
|
PRJ-62060, PMTR-111171 |
Security Management |
UPDATE: In environments with hundreds of Updatable Objects, policy installation time has been significantly improved. |
|
PRJ-57222, PRHF-36163 |
CPView |
UPDATE: On the Exporter Rates tab in CPView, the Log Exporter configuration name length limit is now increased from 15 characters to 25 characters. This resolves the issue when the configuration name may appear blank if it exceeds the length limit. |
|
PRJ-65492, PMTR-122413 |
Logging |
UPDATE: SmartEvent now supports the "system alert" log type for URL Filtering and Application Control Software Blades. |
|
PRJ-68501, PMTR-127051 |
Logging |
UPDATE: In the Logs view, search performance is improved when the search term includes a Cluster. |
|
PRJ-65349, PMTR-118923 |
Security Gateway |
UPDATE: Added the ability to automatically stop kernel debugging after a specified number of seconds. See the R81.20 Security Gateway Administration Guide. Refer to the command " |
|
PRJ-67792, PRHF-44615 |
Security Gateway |
UPDATE: Optimized Mobile Access policy installation to improve performance in environments with a large Mobile Access Rule Base (more than 500 rules). |
|
PRJ-65588, PRHF-42963 |
Security Gateway |
UPDATE: In environments with thousands of Domain objects or External User Groups, the policy installation duration has been significantly improved. |
|
PRJ-66948, PRHF-44085 |
Security Gateway |
UPDATE: Added the " |
|
PRJ-60907, PRHF-39442 |
SSL Inspection |
UPDATE: Added support for the X.509v3 Subject Key Identifier (SKI) and Authority Key Identifier (AKI) extensions in the HTTPS outbound inspection Certificate Authority (CA). Refer to sk184273. |
|
PRJ-67381, PMTR-125446 |
Mobile Access |
UPDATE: Resolved the Mobile Access Portal XSS vulnerability in the PHP file. |
|
PRJ-66694, PMTR-124314 |
Mobile Access |
UPDATE: The Magnific Popup JavaScript library is upgraded from the 1.1.0 version to 1.2.0. |
|
PRJ-68782, PMTR-127386 |
Gaia OS |
UPDATE: Gaia API updates are now included in the Jumbo Hotfix Accumulator (previously were installed by AutoUpdater). See sk143612. |
|
PRJ-63808, PRJ-65094 |
Cloud Firewall |
UPDATE: Azure VM sizes v2 and v3 are no longer supported. During installation of Jumbo Hotfix Accumulator or in-place upgrade, this message is now displayed: "The Azure VM size {VMsize} is deprecated for upgrade. Refer to sk183693 for details" |
|
PRJ-67527, PMTR-125744 |
Scalable Platforms |
UPDATE: Old SVMAC feature is now deprecated (" Only use the new SVMAC feature (" Refer to sk165674. |
|
PRJ-64981, PMTR-121665 |
Scalable Platforms |
UPDATE: Improved warning message, user confirmation prompt, and audit logging when running the " |
|
PRJ-62352, PRHF-37359 |
Scalable Platforms |
UPDATE Global parameter " |
|
PRJ-66879, PMTR-117271 |
Scalable Platforms |
UPDATE: Change in " |
|
PRJ-60553, PRHF-30495 |
Scalable Platforms |
UPDATE: " |
|
PRJ-61156, PRHF-39669 |
Diagnostics |
When the "Same VMAC" feature is enabled, concurrent connections are not updated during site failover. |
|
PRJ-60389, PRHF-39002 |
CPView |
In the VLAN interface, CPView shows the speed of the parent. |
|
PRJ-67371, PRHF-44242 |
CPView |
CPU information may not be displayed in the CPU tab in CPView for an environment with Virtual Systems. |
|
PRJ-68532, PRHF-45122 |
Security Management |
In rare scenarios, the FWM process on the Multi-Domain Security Management Server may not stop after running |
|
PRJ-66178, PRHF-43671 |
Security Management |
In some scenarios, accumulated open sessions can cause the Security Management Server to become unavailable. |
|
PRJ-55499, PRHF-34095 |
Security Management |
The delay may be observed during the "compiling policy" and "generating policy files" stages in SmartConsole. |
|
PRJ-65206, PRHF-42646 |
Security Management |
API login to the Security Management Server may fail with a "Null Pointer Exception" error when the session name, comment, or description is specified. |
|
PRJ-61548, PRJ-62108 |
Security Management |
In some scenarios, the automatic update of Data Center assets fails. Refer to sk184316 |
|
PRJ-60902, PRHF-39412 |
Security Management |
In some scenarios, when attempting to view a revision in SmartConsole, it unexpectedly crashes after several minutes with the error message: "SmartConsole has experienced a serious problem and needs to relaunch." |
|
PRJ-67190, PMTR-124870 |
Security Management |
In some scenarios, after the FWM process crashes and generates a core dump, High Availability synchronization may fail, and the Security Management Servers may appear as disconnected. |
|
PRJ-68292, PRHF-45027 |
Security Management |
SmartTasks may fail to send email notifications with a "send mail to <email address> failed" error when the Cc field is populated |
|
PRJ-64521, PRHF-42149, PRJ-64524, PRHF-42412 |
Security Management |
In some scenarios, opening a Security Gateway object in SmartConsole fails with "Smart Dashboard component failed to connect to a server". |
|
PRJ-63496, PRHF-41612 |
Security Management |
Policy installation may fail with "failed to get tls rulebases from policy id". |
|
PRJ-63493, PRHF-41691 |
Security Management |
If the "Revert to Revision" operation fails:
|
|
PRJ-66976, PRHF-44315 |
Security Management |
The FWM process may exit because of memory exhaustion and generate large core files (up to 4GB). |
|
PRJ-66030, PRHF-43621 |
Security Management |
In some scenarios, the Security Management Server may generate excessive log messages, causing the $FWDIR/log/cpm.elg log file to reach its size limit quickly. |
|
PRJ-66224, PRHF-43824 |
Security Management |
Packet mode search does not return results for Inline Layer rules in SmartConsole and Management API. Refer to sk184638. |
|
PRJ-65777, PRHF-43423 |
Security Management |
In rare scenarios, some Management API commands may fail with "Management server failed to execute command" error. |
|
PRJ-63909, PRHF-41943 |
Security Management |
In some scenarios, the Management API command " |
|
PRJ-64044, PRHF-42109 |
Security Management |
In some scenarios, running the " |
|
PRJ-64100, PRHF-42074, PRJ-66378, PRHF-43925 |
Security Management |
In rare scenarios, the Security Management Server fails to start after performing a "Revert to Revision" operation. |
|
PRJ-65161, PRHF-42879 |
Security Management |
In SmartTask-generated emails, the Sender field displays the username instead of the user's email address. |
|
PRJ-63532, PRHF-41677 |
Security Management |
Rulebase search for a specific user may fail to return rules that include user groups in which the user is a member. |
|
PRJ-69130, PMTR-127809 |
Security Management |
In some scenarios, the FWM process on the Security Management Server may unexpectedly exit when performing the "Fetch branches" action in the LDAP Account Unit properties window of SmartConsole. |
|
PRJ-66973, PRHF-44216 |
Security Management |
A SmartTask configured to send an email after policy installation may fail when the target gateway is a VSX object. |
|
PRJ-66867, PRHF-44037 |
Security Management |
SmartConsole may display the error "the user already exists" when attempting to create a new administrator with the same name as a previously deleted SAML (Identity Provider) administrator. |
|
PRJ-66324, PRHF-43883 |
Security Management |
In some scenarios, an API key may become invalid after editing an administrator account. |
|
PRJ-66605, PMTR-124200 |
Security Management |
If the MGMTCOMP-DIFF-REPORT-CLIENT process becomes suspended on the Security Management Server, the Server-side Change Report Generator fails to generate and send reports when processing a large number of changes. |
|
PRJ-65007, PRHF-42618 |
Security Management |
In some scenarios, the submit-time field in emails generated by SmartTask displays an incorrect value. |
|
PRJ-65035, PRHF-42720 |
Security Management |
In some scenarios, the status of a Security Gateway is incorrectly displayed in the Gateways & Servers View. |
|
PRJ-65046, PRJ-65041 |
Security Management |
When connecting a Domain to the Check Point Portal, Dedicated Log Servers in the Domain may not be automatically connected. |
|
PRJ-63570, PRHF-41727 |
Security Management |
The Security Management Server upgrade may fail during the export phase with the "Object not found - Entities can not be found" message. |
|
PRJ-65446, PRHF-43029 |
Security Management |
In some scenarios, Global Domain assignment may fail with the "Failed to save the access policy assignment properties" error. |
|
PRJ-66945, PRHF-44222 |
Security Management |
SmartWorkflow may incorrectly show zero changes for a session, preventing the change report from being displayed. Refer to sk184779. |
|
PRJ-65669, PRHF-43067 |
Security Management |
In some scenarios, the Domain Log Management Server fails to connect to the Check Point Portal. |
|
PRJ-61278, PRHF-39745 |
Security Management |
In some scenarios, the Management API command " |
|
PRJ-61280, PRHF-38623 |
Security Management |
In rare scenarios, the /var/tmp directory may be filled up with redundant tmpUserDefineCmd_OS0*.sh files, created during Compliance Software Blade scans. |
|
PRJ-61771, PRHF-40047 |
Security Management |
Security Gateway license information may not be visible in SmartConsole when using Demo mode or when connecting with a read-only user. |
|
PRJ-59613, PRHF-38392 |
Security Management |
Upon creation of a new Domain on a Multi-Domain Security Management Server, the Domain Server's virtual IP address is not added to the Gaia database, making it inaccessible via Clish commands. Refer to sk183941. |
|
PRJ-68994, PMTR-127578 |
AIOps |
A temporary fix related to the QUID identity database (used by CPDiag and AIOps) caused issues in Maestro environments and led to degradation and occasional agent resets in AIOps, as it relies on this component as its IdentityDB. The fix has therefore been removed. |
|
PRJ-56715, PRHF-35509 |
Logging |
In the Connection logs, the Source Country and Destination Country fields may contain missing or incorrect values. |
|
PRJ-59832, PRHF-38494 |
Logging |
In HTTPS Inspection logs, some log entries may incorrectly display "Log Update" in the Software Blade field. |
|
PRJ-64073, SL-9462 |
Logging |
In some scenarios, incorrect values are shown in the "Total Bytes" field in the logs. Refer to sk184237. |
|
PRJ-66841, PRHF-44182 |
Logging |
In some scenarios, non-ASCII characters may appear garbled in SmartEvent Automatic Reaction emails. |
|
PRJ-66530, PRHF-44001 |
Logging |
CPView may display "N/A" values for logging-related metrics when there is insufficient free disk space in the log partition. |
|
PRJ-63013, PRHF-41211 |
Logging |
In some scenarios, the SmartLog Server process may unexpectedly exit and generate a core dump. |
|
PRJ-66903, PRHF-44038 |
Logging |
High load on the LOG_INDEXER process may impact system performance. |
|
PRJ-66321, PMTR-123346 |
Logging |
In some scenarios, the LOG_INDEXER process unexpectedly exits and generates a core dump. |
|
PRJ-66656, PRHF-41752 |
Logging |
In SmartConsole, when exporting logs from the Logs tab to a CSV file, the "Rule" column may display only the parent rule number instead of the specific inline rule number. |
|
PRJ-65331, PRHF-42927 |
Logging |
In SmartView Monitor, opened from the Logs & Events > Tunnel & User Monitoring view, the "SmartEvent Correlation Unit" status may be displayed as "Not running" although the CPSEMD process is running. |
|
PRJ-63440, PRHF-39816 |
Logging |
In a Management High Availability environment, configuring threshold settings in SmartView Monitor, fails with the "Couldn't load threshold settings for the selected gateway" error. |
|
PRJ-65905, PMTR-121592 |
Logging |
In the "HTTPS Inspection Statistics" in SmartView, filtering by the "bypass_reason" field returns no results. |
|
PRJ-60250, PRHF-36152 |
Logging |
SmartEvent processes may unexpectedly exit in environments containing over 1 million network objects. |
|
PRJ-68593, PRHF-45113 |
Security Gateway |
In a rare scenario, the FWK process crashes when the Mirror and Decrypt feature handles large MTU frames. |
|
PRJ-62434, PRHF-40579 |
Security Gateway |
FTP traffic does not pass through Security Gateway when using the FTP Extended Passive Mode. Refer to sk183853. |
|
PRJ-64833, PRHF-42537 |
Security Gateway |
Legitimate files may be incorrectly flagged as malicious when scanned with ICAP. Refer to sk184628. |
|
PRJ-57232, PRHF-29611 |
Security Gateway |
In a rare scenario, the CPD process may crash because of a race condition. |
|
PRJ-62968, PRHF-41301 |
Security Gateway |
In rare scenarios, when deleting a subordinate interface from a bonding group, the FWK process may exit. Refer to sk183736. |
|
PRJ-65663, PRHF-43354 |
Security Gateway |
There may be high CPU usage by the CMID process when the ICAP Client is enabled on Security Gateway. Refer to sk184524. |
|
PRJ-66747, PRHF-44002 |
Security Gateway |
When ISP Redundancy is enabled, and the administrator changes the priority, the primary ISP may not be updated in the Security Gateway (the route is updated, but the Security Gateway continues to consider the old ISP as the primary/standby). Refer to sk184923. |
|
PRJ-68165, PMTR-113101 |
Security Gateway |
Policy installation may fail because of empty settings in Suspicious Activity Monitoring (SAM) rules. |
|
PRJ-60595, FMW-2291 |
Security Gateway |
In cluster configurations, synchronization between members was optimized to reduce CPU overhead. |
|
PRJ-62366, PMTR-116380 |
Security Gateway |
On 9400, 9700, and 9800 Check Point Firewall Appliances, the throughput is blocked up to ~2.5G for IPv6 tests. |
|
PRJ-64518, PRHF-41790 |
Security Gateway |
First packet may be delayed for around 10 seconds because of pending WSDNSD DNS lookup over TCP. Refer to sk184096. |
|
PRJ-64161, PRHF-42100 |
Security Gateway |
In rare scenarios, ElasticXL VSX Cluster Members fail over several times per day because of HTTP/2 explicit proxy process termination. Refer to sk184932. |
|
PRJ-65228, PRHF-42920 |
Security Gateway |
Active Streaming Layer connections become stuck, resulting in increased memory consumption over time on the Security Gateway. |
|
PRJ-65267, PMTR-121815 |
Security Gateway |
In some scenarios, non-accelerated traffic from a Standby VSX Cluster member may not be routed to the correct virtual instance on the current Active member when SecureXL User Mode (UPPAK) is enabled. |
|
PRJ-63998, PRHF-42068 |
Security Gateway |
Suspicious Activity Monitoring (SAM) rules may not function properly on a standalone device. Refer to sk184330. |
|
PRJ-67079, PRHF-44360 |
Security Gateway |
On ClusterXL and in Maestro Security Groups, after performing a rolling upgrade that includes a change in the CoreXL instance count, newly created firewall instances may remain in local-sync-only mode. As a result, these instances do not receive state updates from their peers, leading to intermittent connection failures and "First packet isn't SYN" drops. Refer to sk184786. |
|
PRJ-67745, PMTR-125710 |
Security Gateway |
In a rare scenario, the FWD daemon may restart because of the Application Control Dynamic URL List version file. |
|
PRJ-67646, PRHF-44347 |
Security Gateway |
In some scenarios, internal memory mishandling in global connections may cause unexpected behavior or connectivity issues. |
|
PRJ-67155, PRHF-44365 |
Security Gateway |
In some scenarios related to Check Point Active Streaming (CPAS), the Security Gateway may unexpectedly crash. |
|
PRJ-66358, PRHF-43916 |
Security Gateway |
The BMAC/VMAC verification for a VSX Maestro Security Group member incorrectly reports a failure on warp interfaces. |
|
PRJ-65756, PRHF-42940 |
Security Gateway |
Some service ports may be missing in some instances, resulting in unexpected behavior for some services. |
|
PRJ-65726, PRHF-43228 |
Security Gateway |
In some scenarios, when the Mirror and Decrypt feature is enabled, there may be traffic disruption. |
|
PRJ-64087, PRHF-40610 |
Security Gateway |
The RAD daemon may unexpectedly exit when customizing RAD internal parameters (" |
|
PRJ-64077, PRHF-41256 |
Security Gateway |
In scenarios where a network connection is closed before the Anti-Virus ThreatCloud emulation or scanning response is received, the affected session may experience connectivity instability. |
|
PRJ-64055, PRHF-42098 |
Security Gateway |
In rare scenarios, the FWK process may unexpectedly restart when an HTTP/2 connection containing specific stream characteristics is released. |
|
PRJ-66620, PRHF-44062 |
Security Gateway |
In rare cases, the FWK process may restart unexpectedly while the Security Gateway is processing a URL Filtering categorization response and a policy installation is running simultaneously. |
|
PRJ-66488, PRHF-43994 |
Security Gateway |
In a rare HTTP/2 traffic scenario, a valid connection may fail. |
|
PRJ-65441, PRHF-42991 |
Security Gateway |
The SD-WAN NAT rule may not be applied when no NAT is defined in the Access Control policy. |
|
PRJ-63681, PRA-5002 |
Security Gateway |
In a rare scenario, the FWD process may crash during Policy Installation because of memory corruption related to licensing. |
|
PRJ-63658, PRHF-41793 |
Security Gateway |
FTP transfers of files smaller than 1KB fail and result in empty files on the destination server. Refer to sk184200. |
|
PRJ-65521, PRHF-42914 |
Security Gateway |
RSH connections fail when Destination NAT is configured for the RSH server. Refer to sk184768. |
|
PRJ-66803, PRHF-44149 |
Security Gateway |
In rare scenarios, the FWK process may unexpectedly exit when the Anti-Bot Software Blade inspects a specific malformed domain. |
|
PRJ-66419, PRHF-43935 |
Security Gateway |
In a rare scenario, a memory leak may occur due to a race condition between policy installation and Application Control/IPS signature updates, and persists until the next policy installation. |
|
PRJ-66431, PRHF-43910 |
Security Gateway |
The memory usage may increase over time when using the Mirror and Decrypt feature. |
|
PRJ-66003, PRHF-43522 |
Security Gateway |
In a rare scenario, an incorrect zone assignment occurs when NAT Rule Base returns HOLD. Refer to sk184530. |
|
PRJ-65977, PRHF-43452 |
Security Gateway |
After an upgrade, the " |
|
PRJ-64913, PRA-4998 |
Security Gateway |
When ESP traffic is present in the environment, and the |
|
PRJ-64755, PRHF-38664 |
Security Gateway |
The ICAP client does not work correctly, impacts the allowed number of characters for the ":service" field in the ICAP configuration file $FWDIR/conf/icap_client_blade_configuration.C. |
|
PRJ-62611, PRHF-41063 |
Security Gateway |
In some rare scenarios, when HyperFlow is enabled, HTTPS traffic fails when processed in the accelerated pipelined path. Websites going through SSL Inspection may take a long time to load or parts of the website may not load. |
|
PRJ-61384, PMTR-113498 |
Security Gateway |
In a VSX setup, when Dynamic Balancing is enabled, and an Elephant Flow is running, only one firewall instance may remain active to handle the rest of the traffic. |
|
PRJ-64845, PMTR-120708 |
Security Gateway |
HTTPS inspection causes connections to fail when using a custom service with a non-standard HTTPS port (for example, TCP/9400), and the custom service object is configured with "Protocol: None". Refer to sk184294. |
|
PRJ-63599, PMTR-117005 |
Security Gateway |
In some scenarios, DOS/Rate Limiting causes blocking errors during boot. |
|
PRJ-63725, PMTR-94556 |
Security Gateway |
Connections handled by CPAS may stop forwarding data upon receiving a FIN from one side. As a result, a file download fails. |
|
PRJ-60247, PMTR-113336 |
Security Gateway |
In some scenarios, active connections using HyperFlow are closed following a crash of the dmd_run process, and the FWK process may also crash. This error appears in the dmd.elg file: "mux_dmd_handle_errors_from_dmd: Handling errors from DMD. error SESSION_COLLISION". |
|
PRJ-58537, PRHF-37274 |
Threat Prevention |
SSH connections may fail after enabling SSH Deep Packet Inspection (DPI). |
|
PRJ-69301, PMTR-124700 |
Threat Prevention |
In some scenarios, Zero Phishing becomes inactive during traffic inspection when Anti-Virus performs a Deep Scan on HTML or JavaScript files. |
|
PRJ-68771, PMTR-127315 |
Threat Prevention |
IoC feed observables may continue to be enforced even after Anti-Virus and Anti-Bot are disabled. |
|
PRJ-66295, PMTR-123479 |
Threat Prevention |
In a rare scenario, the Threat Prevention rule base may fail to match traffic to any rule. |
|
PRJ-65306, PRHF-42982 |
Threat Prevention |
In rare scenarios, the Anti-Virus fails to inspect HTTP file downloads. |
|
PRJ-63419, PMTR-114692 |
Threat Prevention |
In certain scenarios, IP Range observables using CIDR notation within an IoC feed may not be enforced by the Gateway. Refer to sk184031. |
|
PRJ-57712, PRHF-36392 |
Identity Awareness |
The Microsoft Graph API access token does not renew if an authorization error occurs while working in on-demand fetch mode. |
|
PRJ-65631, PRHF-42181 |
Identity Awareness |
Identity Awareness AD user authentication takes a long time. Refer to sk183748. |
|
PRJ-69141, PMTR-127848 |
Identity Awareness |
The default role in Aruba Networks ClearPass CPPM does not match the identity sessions. |
|
PRJ-64693, PRHF-42522 |
Identity Awareness |
When the Packet Tagging feature is enabled on the Full Identity Agent, new user and machine identity sessions reported to the Identity Awareness Gateway may not be assigned the correct access roles. As a result, traffic from these sessions may not match Access Control Policy rules that use access roles with Packet Tagging enabled. |
|
PRJ-64119, PRHF-41176 |
Identity Awareness |
In a rare scenario, there may be no access to resources for identities received from the Remote Access identity source. |
|
PRJ-64919, PRHF-42534 |
Identity Awareness |
In a rare scenario, a Policy Decision Point (PDP) Security Gateway that acts as both an Identity Broker Subscriber and a sharing identity with a Policy Enforcement Point (PEP) may become unresponsive. |
|
PRJ-59798, PRHF-38576 |
Identity Awareness |
SNMP queries to the Security Gateway may return unexpected results: specific IP addresses or Identity Collector objects may continue to appear in SNMP outputs even after being removed from the topology configuration. Additionally, polling OIDs such as 1.3.6.1.4.1.2620.1.38.55 or 1.3.6.1.4.1.2620.1.38.53 may result in the message "No Such Instance currently exists at this OID" |
|
PRJ-64785, PRHF-42302 |
Identity Awareness |
In some scenarios, the PDPD process stops responding and users cannot authenticate through the Identity Awareness. Refer to sk184407. |
|
PRJ-65959, PMTR-123099 |
Application Control |
Updating two or more Dynamic URL Lists may result in partial updates. |
|
PRJ-66560, PRHF-43834 |
Application Control |
When using custom applications and SD-WAN, HTTPS traffic may be blocked with "Reason: Application Control - Internal system error" in SmartConsole log. |
|
PRJ-65875, PMTR-123004 |
Application Control |
In a rare scenario, when using Dynamic URL List, updating the version file may result in a FWK process restart. |
|
PRJ-67578, PRHF-44375 |
URL Filtering |
RAD request drop may occur in rare case header includes unsupported characters. |
|
PRJ-67374, PMTR-125272 |
IPS |
In some scenarios, the Custom Threat Prevention policy fails to enforce IPS protection overrides on rules configured with a network group in the "Install On" column. |
|
PRJ-59837, PRHF-38433 |
DLP |
In some scenarios, changes to the kernel parameter " |
|
PRJ-65023, PRHF-42722 |
Anti-Virus |
In rare scenarios, the RAD process may exit generating a core dump. |
|
PRJ-65578, AAD-8717 |
SSL Inspection |
A memory leak may occur in the parsers_is TLS module when HTTPS Inspection is enabled and used to inspect non-standard TLS traffic transmitted over a proxy. |
|
PRJ-66593, PRHF-44051 |
Mobile Access |
When Mobile Access is working in Path Translation (PT) Link Translation mode, the Citrix application may not load after an upgrade to Citrix version LTSR 2507 |
|
PRJ-70252, PMTR-129404 |
Mobile Access |
After hardening non-RFC-compliant HTTP requests, some Mobile VPN connections fail. Since multiple clients send bare LF requests (a specific type of non-RFC-compliant traffic), bare LF errors are now disabled by default. This behavior can be enabled using the kernel parameter " |
|
PRJ-64364, PRHF-40663 |
ClusterXL |
Connections with fragmented packets drop on Scalable Platform/Maestro when there are multiple active Security Group Members (SGMs) on the site. Refer to sk182559. |
|
PRJ-64089, PRA-5003 |
ClusterXL |
When MDPS is enabled, cluster members may remain in INIT or DOWN state after reboot. |
|
PRJ-66292, PRA-5197 |
ClusterXL |
In rare scenarios, CPHASTART, CPHACONF, and CPHAMCSET processes may intermittently unexpectedly exit. |
|
PRJ-66147, PMTR-123186 |
ClusterXL |
After rebooting specific Security Group Members (SGMs) in a dual-site Maestro environment, PDP (Policy Decision Point) to PEP (Policy Enforcement Point) connections are not always corrected to the SMO (Single Management Object) as expected. This results in connection restarts and additional CPU load. |
|
PRJ-65991, PRHF-43213 |
ClusterXL |
In some scenarios, the USIM process may unexpectedly exit. |
|
PRJ-59710, PRHF-37976 |
ClusterXL |
The " |
|
PRJ-66066, PMTR-121465 |
SecureXL |
In a Cloud Firewall environment with Kernel Performance Pack (KPPAK) enabled by default, when modifying the TX queue size parameter for supported network interfaces to 2048 (2K) or 4096 (4K), reverting the setting back to the default value of 1024 (1K) is not possible. The issue is observed with these synthetic network drivers: virtio (used in GCP and KVM environments), vmxnet3 (used in VMware ESXi), and ena (used in AWS). |
|
PRJ-66601, PMTR-117662 |
SecureXL |
In some scenarios, a crash occurs when many concurrent nexthop lookups are performed. |
|
PRJ-57244, PMTR-103508 |
SecureXL |
Added logic to forbid IP forwarding at startup if the deny list/rate limit policy installation fails. |
|
PRJ-64487, PMTR-120867 |
SecureXL |
In rare scenarios, instability of the User Space Firewall during system boot may cause failures in SecureXL User Mode (UPPAK). |
|
PRJ-64173, PRHF-42253 |
SecureXL |
The " |
|
PRJ-64146, PMTR-120207 |
SecureXL |
The Security Gateway with SecureXL User Mode (UPPAK) enabled may not properly update routes when bond interfaces are configured. |
|
PRJ-63505, PMTR-119083 |
SecureXL |
When VLAN interfaces are created on top of bond interfaces configured for Load Sharing, connections may not be hardware accelerated if the bond uses multiple ports from the same physical NIC. Refer to sk184291. |
|
PRJ-67244, PRHF-44550 |
SecureXL |
Maestro backplane interfaces may appear in the SYN Defender interface list. This is a cosmetic issue. |
|
PRJ-67765, PMTR-119508 |
SecureXL |
When using DoS Deny List and running " |
|
PRJ-67065, PMTR-124718 |
SecureXL |
The FWK process may exit during an upgrade if DOS/Rate limiting is active. |
|
PRJ-68392, PMTR-106768 |
SecureXL |
In some scenarios, VPN clients establish the tunnel in Visitor Mode instead of NAT-T. |
|
PRJ-68720, PMTR-126262 |
SecureXL |
After rebooting the Security Gateway, the Allow List entry is present when viewing the list, but it is not enforced. The Deny List takes precedence, and traffic from the IP is blocked, even though it should be allowed according to the configuration |
|
PRJ-66506, PMTR-122586 |
SecureXL |
In some scenarios in a VSX Maestro Security Group, when SecureXL User Mode (UPPAK) is enabled, a cluster member may incorrectly forward traffic through a Warp interface to the incorrect Virtual System. This results in traffic not being processed by the intended Virtual System, potentially causing "Out of State" drops. |
|
PRJ-66211, PMTR-123304 |
SecureXL |
A reference count issue in the UPPAK module can cause a USIM process core dump, particularly on busy systems with long uptime. |
|
PRJ-66170, PRHF-43757 |
SecureXL |
In some scenarios, when installing a policy fails, the Sand Blast Security Gateway becomes unresponsive and reboots automatically. The "Installation failed. Reason: Due to a timeout value of 600000 (millisecond) (port) (IP), Security Management Server aborted the connection with the peer" error is displayed in SmartConsole. |
|
PRJ-65913, PMTR-122248 |
SecureXL |
When SecureXL User Mode (UPPAK) is enabled on a VSX Security Gateway, taking down a warp interface on any Virtual System may cause all Virtual Systems connected to the same Virtual Router or Switch to lose network connectivity. |
|
PRJ-65450, PMTR-121744 |
SecureXL |
Permanently disabling the " |
|
PRJ-65600, PMTR-122439 |
SecureXL |
When SecureXL works in User Mode (UPPAK) on Security Gateways with CPAC-4-10F-C interface modules, invalid Ethernet frames permanently shut down the port's transmit queue, causing complete connectivity loss. |
|
PRJ-65885, PRHF-43515 |
SecureXL |
PPTP/GRE traffic fails when Hide NAT is used and SecureXL runs in UPPAK mode and the " |
|
PRJ-54515, PMTR-103535 |
SecureXL |
The USIM process may crash because of memory allocation failures. |
|
PRJ-61885, PRJ-61014 |
SecureXL |
In some scenarios, an error occurs in UPPAK mode when packets are cloned. This can lead to random crashes in the USIM process, causing instability during interface changes or high traffic. |
|
PRJ-69885, PRJ-69330 |
SecureXL |
In some scenarios, the VSX Security Gateway passes traffic without performing proper NAT from a Virtual Router or Switch's external interface when SecureXL User Mode is enabled. |
|
PRJ-64012, PMTR-119496 |
SecureXL |
In some scenarios in UPPAK mode, the nexthops may be incorrectly indexed, which leads to packet drops. |
|
PRJ-67172, PRHF-44146 |
Routing |
A ROUTED daemon may exit with a dump file during an OSPF route lookup on a route being redistributed between BGP and OSPF. |
|
PRJ-66228, PRHF-43674 |
Routing |
The ROUTED daemon may exit when running the " |
|
PRJ-67017, PRHF-44174 |
Routing |
The ROUTED daemon may exit with a pnote on Security Group Members after the Orchestrator daemon (ORCHD) stops. Refer to sk184771. |
|
PRJ-65916, PMTR-122434 |
Routing |
A VSX Security Gateway may drop traffic with IPv4 options or IPv6 extension headers arriving from a Virtual Switch (VSW) interface. |
|
PRJ-67624, PRHF-44844 |
VSX |
When using VSX SmartProvisioning on Maestro, the operation fails if the VSX Gateway name includes the substring "wrp0". |
|
PRJ-67113, PMTR-123775 |
VSX |
When adding or deleting static routes in the huge VSX environment (more than 50 Virtual Systems and hundreds of static routes), VS creation fails with "Unable to watch directory /etc/routed-mc-enable: init: Too many open files". Refer to sk181317. |
|
PRJ-58507, PRHF-44304 |
VSX |
When configuring DNS addresses per-VS (different servers for different VSs), the DNS may fail. |
|
PRJ-62321, PMTR-116925 |
VSX |
In some scenarios, the CPView utility causes high CPU usage or becomes stuck while calculating disk space. |
|
PRJ-67929, PRHF-45114 |
Multi-Portal |
In a rare scenario, a security hardening change related to Multi-Portal connections may cause an unexpected Security Gateway restart when such a connection is terminated. |
|
PRJ-53498, PRHF-32832 |
Gaia OS |
A snapshot created via the Gaia Portal is deleted immediately upon creation. Once this occurs, the operation cannot be retried. Orphaned lock files block all subsequent attempts. The error "Snapshot: Failed to take snapshot. Another backup / snapshot is currently in execution. Please try again in a few moments" is printed in the logs. Manual deletion of the lock files is required to restore functionality. Applying the workaround from sk100403 does not provide a permanent resolution, and the issue recurs. |
|
PRJ-59153, PRHF-37998 |
Gaia OS |
When the nstat utility (in the iproute2 package) encounters a corrupted state file (for example, if /tmp/.nstat.u0 contains invalid data), it aborts with a core dump instead of providing an error message. |
|
PRJ-59063, PMTR-110978 |
Gaia OS |
The " |
|
PRJ-50670, PRHF-30690 |
Gaia OS |
Custom log rotation configured using Gaia OS does not apply to SAML-related log files, so these logs are not rotated automatically. Refer to sk113241 |
|
PRJ-56024, PRHF-34965 |
Gaia OS |
Custom log rotation configured using Gaia OS does not apply to UserCheck Portal log files, so these logs are not rotated automatically. Refer to sk113241. |
|
PRJ-64588, PRHF-41203 |
Gaia OS |
CPU spikes may occur in a cluster when SNMP is enabled. |
|
PRJ-67501, PRHF-44333 |
Gaia OS |
After an upgrade, in some scenarios, two-factor authentication (2FA) may not be enforced for SSH access. This results in users are able to authenticate via SSH without the required 2FA. |
|
PRJ-69111, PRHF-44815 |
Gaia OS |
After disabling Two-factor authentication (2FA) in Gaia OS, the user still requires a 2FA code on login attempts. |
|
PRJ-64556, PRHF-42434 |
Gaia OS |
Unable to enter Virtual System with " |
|
PRJ-66750, PRHF-44108 |
Gaia OS |
Cloning groups may fail during configuration updates. Refer to sk184701. |
|
PRJ-65946, PRHF-43616 |
Gaia OS |
Remote and local backup operations fail after installation of Jumbo Hotfix Accumulator with the "Cannot complete the backup process: not enough space in /var/log/CPbackup/backups" error. Refer to sk183767. |
|
PRJ-65648, PRHF-43017 |
Gaia OS |
Excessive log entries for RADIUS users logging into Gaia Portal. Refer to sk184534. |
|
PRJ-66614, PRHF-43985 |
Gaia OS |
Newly added SGM remains "Down" on Scalable Chassis with SSM440 configured with MTU higher than 9000. Refer to sk184653. |
|
PRJ-66407, PRHF-43907 |
Gaia OS |
The SNMPD daemon fails to restart when an interface configured with an IPv6 address is set as the SNMP agent interface. |
|
PRJ-65925, PRHF-43620 |
Gaia OS |
Clish may restart unexpectedly when running the |
|
PRJ-65698, PRHF-42970 |
Gaia OS |
Chassis parameters " |
|
PRJ-65525, PRHF-43016 |
Gaia OS |
Upon logging in to the Gaia Portal, the login page accepts the credentials, briefly displays the homepage, and then automatically redirects back to the login screen. |
|
PRJ-64773, PRHF-42632 |
Gaia OS |
Configuring an IPv6 NTP server (via CLI or WebUI) may cause the NTP service to ignore the server and repeatedly log errors. |
|
PRJ-62670, PRHF-40983 |
Gaia OS |
Multiple "login_notifier_server: before force_2fa_generation, params: 2fa-check" messages appear in the /var/log/messages file. The issue is cosmetic. Refer to sk183690. |
|
PRJ-69002, PRHF-45517 |
Gaia OS |
In Gaia Portal, bond member interfaces can be edited when they should be disabled. |
|
PRJ-68249, PMTR-126527 |
Gaia OS |
For IDNS-Resolver, when the DNS server returns "TC=1", and communication should be moved to TCP instead of UDP, TCP communication does not block DNS requests. |
|
PRJ-66883, PRHF-43932 |
Gaia OS |
In rare scenarios, the CORE_UPLOADER process on Security Gateways may unexpectedly generate a core dump when the number of detected CPU cores exceeds a specific threshold. |
|
PRJ-67602, PRHF-44603 |
Gaia OS |
In some scenarios, SNMP monitoring may incorrectly report 100% CPU usage. |
|
PRJ-70033, PMTR-129280 |
VPN |
Improved certificate validation during IKEv2 VPN negotiations to ensure VPN connections are established only after successful certificate-based authentication. |
|
PRJ-62054, PRHF-40518 |
VPN |
IKE daemons may fail to start on Cluster members without generating dump files. |
|
PRJ-64805, PRHF-42566 |
VPN |
Traffic passing through a route-based VPN tunnel may cause high CPU usage if the traffic is fragmented. |
|
PRJ-68989, PMTR-116331 |
VPN |
Added the ability to import additional .p12 certificate types as inbound and outbound certificates. |
|
PRJ-67351, PMTR-125245 |
VPN |
In VPN Site-to-Site environments, a memory leak in VPN-related processes may occur after a VPN driver restart, or during prolonged system runtime. |
|
PRJ-69426, PMTR-128278 |
VPN |
Improved input validation in the VPN L2TP PPP packet parser to handle malformed configuration options correctly. |
|
PRJ-69525, PMTR-128338 |
VPN |
Improved address validation in the VPN Remote Access proxy to correctly restrict outbound connections to internal and link-local destinations. |
|
PRJ-66364, PMTR-123613 |
VPN |
In some scenarios, over time, prolonged VPN traffic may lead to gradual memory growth. |
|
PRJ-70098, PRHF-45664 |
VPN |
In ElasticXL environments, a stale NAT-T port in the cluster sync overwrites the correct port. |
|
PRJ-66683, PMTR-123507 |
VPN |
During VPN IKEv2 negotiations with third-party peers that offer multiple combined encryption algorithms (both AES-GCM-128 and AES-GCM-256), the Security Gateway may not properly match the proposal, resulting in IKE failure logs and the tunnel establishment failure. |
|
PRJ-65825, PRHF-43529 |
VPN |
A customized Per-gateway Secure Configuration Verification (SCV) policy is not enforced for Remote Access VPN clients. Refer to sk184863. |
|
PRJ-65325, PRHF-42932 |
VPN |
When using Capsule VPN or Endpoint Security VPN (Connect) clients in IPsec mode with IKED enabled, users can successfully authenticate and establish a VPN tunnel. However, group information received from the RADIUS server is not passed to the IKED process. As a result, security policies and access roles that rely on RADIUS group membership do not apply, and users are unable to access internal resources through the VPN. |
|
PRJ-65320, PRHF-42883 |
VPN |
The VPND or IKED daemon may crash during IKEv2 negotiation. |
|
PRJ-63828, PRHF-41901 |
VPN |
When generating a CPInfo file using the CPInfo utility, major CPU spikes may occur on the Security Gateway or Security Management Server. |
|
PRJ-65666, PMTR-119883 |
VPN |
When Hub Mode is not enabled, traffic destined for dynamic objects included in the Remote Access VPN Split Tunneling Inclusion group may be incorrectly dropped. As a result, remote users may be unable to access resources defined by these dynamic objects, even though they are specified for inclusion in the split tunnel. |
|
PRJ-61161, PMTR-92656 |
VPN |
A VPN tunnel may fail to establish in ClusterXL Load Sharing Mode during cluster member failover (pivot recovery). |
|
PRJ-60956, PRHF-38401 |
VPN |
High CPU utilization on single core because of excessive VPN probing and SEP correction in ClusterXL HA Mode. Refer to sk183814. |
|
PRJ-63551, PRHF-41687 |
VPN |
CRL files may not be synchronized as expected in Management High Availability and Multi-Domain Security Management environments. |
|
PRJ-57365, PRHF-36014 |
VPN |
Certificate validity period not applied after using the " |
|
PRJ-62439, PMTR-116975 |
VPN |
Improved SSL Network Extender (SNX) certificate-based authentication stability and session reliability. |
|
PRJ-64734, SDWANGW-5773 |
SD-WAN |
A VPN IPv6 traffic outage may occur when a host/network object is defined with the Security Gateway's main IPv6 address. |
|
PRJ-68332, AAD-9724 |
SD-WAN |
On the Scalable Platform Cluster, LS fragmented packets may be dropped on the receiving member with an error " This may also occur with Cluster HA; however, correcting packets is negligible in such environments. |
|
PRJ-64472, PMTR-120815 |
SD-WAN |
In some scenarios, SD-WAN ISP link status may fluctuate between UP and DOWN states. Reduced SD-WAN ARP probing default sensitivity to packet drops. |
|
PRJ-67305, AAD-9373, PRJ-66600, AAD-9375 |
SD-WAN |
VPN traffic outage may occur in ClusterXL environments after a Cluster failover. |
|
PRJ-66776, PRHF-43782 |
SD-WAN |
In some scenarios, enabling SD-WAN Symmetric Return may lead to elevated CPU utilization on Secure Network Distributor (SND) cores. |
|
PRJ-64870, PRHF-42485 |
SD-WAN |
In rare scenarios, SD-WAN objects (such as Peer VPN Domain, My VPN Domain, or SD-WAN Internet) may be incomplete, causing SD-WAN rules to match traffic incorrectly. |
|
PRJ-66384, PRHF-43223 |
Cloud Firewall |
The FWM may unexpectedly exit when attaching a license to a Security Gateway using vSEC license distribution ( |
|
PRJ-67513, PMTR-125729 |
Cloud Firewall |
Moving Cloud licenses from one pool to another triggers license alignment: If adding a new license to CK fails, license removal will not be initiated on the Security Gateways. |
|
PRJ-69050, PMTR-127703 |
Cloud Firewall |
When a Cloud license's support contract expires, the system now keeps all gateways licensed and alerts the administrator with remediation steps, instead of silently removing their licenses. |
|
PRJ-68795, PMTR-127298 |
Cloud Firewall |
Deleting a license pool while Cloud Firewall Gateways are still associated with it causes all licensing operations (add, distribute, remove) to continuously fail until the orphaned reference is manually cleared from the database. The fix allows licensing operations to complete normally without administrator intervention. |
|
PRJ-65799, PRHF-42758 |
VoIP |
Security Gateway may drop legitimate H323 traffic with "Illegal H.225(Q931) No Q.931 User-user IE found". Refer to sk184591. |
|
PRJ-44176, PRHF-25992 |
Scalable Platforms |
Gaia Portal and Gaia gClish of a Maestro Security Group do not show newly created Loopback interfaces. |
|
PRJ-50825, PMTR-97166 |
Scalable Platforms |
Added the ability to send ping requests (ICMP) from the management interface of a standby site member when using Hide mode or Same VMAC mode. |
|
PRJ-58702, PMTR-97177 |
Scalable Platforms |
The command " |
|
PRJ-64156, PMTR-120199 |
Scalable Platforms |
In some scenarios, when proxy ARP is used, unloading and reloading the policy causes members to enter a down state with a configuration pnote. |
|
PRJ-60808, PMTR-109844 |
Scalable Platforms |
The HCP configuration sync verifier (" |
|
PRJ-67645, PRHF-44577 |
Scalable Platforms |
When adding or removing VS, if the freeze timeout ended before the VS was fully stable, the VS might still have a Critical Device (pnote), which will cause the member to go down. Refer to sk185115. |
|
PRJ-67458, PMTR-109489 |
Scalable Platforms |
When performing a SIC reset after Anti-Malware (AMW) has been installed, some members may enter a "cluster-down" state with an AMW Critical Device. |
|
PRJ-64975, PMTR-121215 |
Scalable Platforms |
When " |
|
PRJ-64753, PMTR-110923 |
Scalable Platforms |
When running the " |
|
PRJ-63907, PRHF-41940 |
Scalable Platforms |
Policy installation on one Virtual System (VS) fails without a visible error message. Refer to sk184194. |
|
PRJ-63816, PRHF-41860 |
Scalable Platforms |
On Maestro appliances, /var/log/messages may be flooded with "asg_copy_capture" error messages when the system attempts to retrieve packet capture files that do not exist on remote Security Group members. |
|
PRJ-67348, PMTR-123997 |
Scalable Platforms |
A Security Group Member may enter a continuous boot loop after the other members were upgraded. An incorrect image file (with an invalid or mismatched MD5 checksum) is presented on the Single Management Object (SMO). As a result, the problematic member fails to complete the autoclone and repeatedly reboots. |
|
PRJ-67184, PRHF-44401 |
Scalable Platforms |
The SGM400 chassis member uses an incorrect backplane Ethernet (BPEth) drive, causing backplane traffic not to be processed on that member. |
|
PRJ-68807, PMTR-126879 |
Scalable Platforms |
When a Security Group member transitions from a down state to an active state, the synchronization process with other members in the Security Group may not complete before the recovered member becomes active. This can result in traffic drops because of incomplete state synchronization. |
|
PRJ-66520, SPC-3384 |
Scalable Platforms |
Rebooting an Active member in the Single Management Object (SMO) role may trigger a brief connectivity loss. |
|
PRJ-66510, PMTR-121748 |
Scalable Platforms |
When MDPS Resource Separation is enabled, pushing policy under load may cause Single Management Object (SMO) to become unresponsive. |
|
PRJ-65968, PMTR-92125 |
Scalable Platforms |
After creating a bridge interface using Gaia Portal and rebooting, the Security Gateway state is Down. |
|
PRJ-65962, PRHF-43121 |
Scalable Platforms |
In a rare scenario, when a VPN-corrected packet is dropped, the packet truncation warning "14 bytes missing" may be seen in the " |
|
PRJ-65540, PMTR-108818 |
Scalable Platforms |
In Maestro or ElasticXL environments with VPN enabled, traffic may be dropped with the log message "fwha_select_should_drop_vmac". |
|
PRJ-65563, PMTR-101420 |
Scalable Platforms |
Identity Collector connections may be handled incorrectly by a non-SMO Security Group Member after an SMO failover. Refer to sk184461. |
|
PRJ-65597, PMTR-122629 |
Scalable Platforms |
Intermittent VS failover when both Maestro Hyperscale Orchestrators (MHOs) have the interface link state set to Down. Refer to sk184568. |
|
PRJ-66119, PRHF-41852 |
Scalable Platforms |
BGP Sessions may fail to re-establish after SMO failover because of physical link failure. Refer to sk184371. |
|
PRJ-69876, PMTR-127622 |
Scalable Platforms |
In VSLS clusters with multiple members, when a member rejoins the cluster after a reboot, an Interface Active Check (IAC) problem notification may incorrectly appear on the rejoining member, showing it in ACTIVE state. This occurs even though all interfaces are physically UP and the cluster is fully functional. |
|
PRJ-65700, PMTR-122627 |
Scalable Platforms |
"TCP packet out of state" or "connection dropped due to state mismatch" messages may be seen in SmartLog or SmartView Tracker. These drops specifically occur on the sync interface, which is used for internal communication and synchronization between Security Group members. |
|
PRJ-67165, PRHF-43859 |
Scalable Platforms |
|
|
PRJ-69163, CST-492 |
Carrier Security |
In a rare scenario, a processed malformed GTP packet may cause the Security Gateway to crash. |
|
PRJ-66713, CST-439 |
Carrier Security |
A "Tunnel established" message may be printed for rejected sessions. The issue is cosmetic. |
|
PRJ-66710, CST-437 |
Carrier Security |
A GTPv0 tunnel fails to establish under certain conditions. |
|
PRJ-65686, CST-423 |
Carrier Security |
GTP-U intra-tunnel packets may be dropped with "Packet too short" and "Invalid IP packet" errors in Bridge Mode, preventing proper inspection of encapsulated traffic. |
|
PRJ-65683, PRHF-42942 |
Carrier Security |
The FWK process may exit when GTP Intra Tunnel Inspection is enabled. |
|
PRJ-65231, PMTR-121783 |
Hardware |
After upgrading the firmware, the interface on one of the VSX cluster members may go down. |
Take 146
Released on 15 June 2026 and declared as Recommended on 21 June 2026
|
ID |
Product |
Description |
|---|---|---|
|
Take 146 - Improvements and Resolved Issues |
||
|
PRJ-69647, PMTR-128753 |
VPN |
UPDATE:
|
|
PRJ-69506, PRHF-45889 |
Security Management |
In rare scenarios, the CPD process may exit because of certain Secure Internal Communication (SIC) transactions. See Critical Information for R81.20 Jumbo Hotfix Accumulator. |
Take 141
Released on 26 May 2026
|
ID |
Product |
Description |
|---|---|---|
|
Take 141 - Improvements and Resolved Issues |
||
|
PRJ-67983, PMTR-126652 |
Security Gateway |
UPDATE: Resolved CVE-2026-48131 - VPND IKE Fragment Reassembly - Heap Out-of-Bounds Write via Sequence Number Zero. Refer to sk184981. |
|
PRJ-67838, PMTR-126457 |
Security Gateway |
UPDATE: Resolved CVE-2026-48132 - VPN process may restart unexpectedly when processing IKE traffic over NAT-T 4500/UDP. Refer to sk184982. |
|
PRJ-67873, PMTR-126538 |
Security Gateway |
UPDATE: Resolved CVE-2026-48133 - Identity Awareness Captive Portal - Unauthenticated Local File Inclusion. Refer to sk184993. |
|
PRJ-67835, PMTR-126454 |
Security Gateway |
UPDATE: Resolved CVE-2026-48134 - SQL injection issue in UserCheck Web Portal when DLP is active. Refer to sk184983. |
|
PRJ-68008, PMTR-126694 |
Security Gateway |
UPDATE: Resolved CVE-2026-48135 - HTTP service can incorrectly process malformed HTTP requests. Refer to sk184991. |
|
PRJ-68354, PMTR-126828 |
Security Management |
UPDATE: Resolved CVE-2026-48136 - Authenticated Administrator Role-Based Access Control Bypass in Compliance. Refer to sk184992. |
|
- |
- |
This Jumbo Hotfix Accumulator Take includes dozens of code and functionality hardening changes. |
|
PRJ-65594, HEC-1347 |
HCP |
UPDATE: Added a new HCP test that analyzes load balancing and NAT utilization, and suggests optimal distribution adjustments accordingly. Refer to sk171436. |
|
PRJ-67789, ODU-3852, PRJ-67785, ODU-3894, PRJ-68754, ODU-4023 |
Automatic Updates - Web SmartConsole |
UPDATE: New features and improvements are released in Take 165 via self-updatable package. Refer to sk170314. |
|
PRJ-66727, ODU-3666 |
Automatic Updates - Log Exporter |
UPDATE: Added Take 53 to Log Exporter Auto Update Deployment. Refer to sk182866. |
|
PRJ-66618, ODU-3347 |
Automatic Updates - Security Management |
UPDATE: Added Update 4 of Server-Side Change Report Generator Release Updates. Refer to sk179508. |
|
PRJ-67187, ODU-3845, PRJ-68134, ODU-3901 |
Automatic Updates - Policy Insights |
UPDATE: Added Take 82, Take 87 of Policy Insights Release Updates. Refer to sk183421. |
|
PRJ-67224, ODU-3738, PRJ-67866, ODU-3957 |
Automatic Updates - HCP |
UPDATE: Added Update 26, Update 27 of HealthCheck Point (HCP) Release. Refer to sk171436. |
|
PRJ-67227, ODU-3467 |
Automatic Updates - Threat Prevention |
UPDATE: Added Update 28 of Autonomous Threat Prevention Management Integration Release. Refer to sk167109. |
|
PRJ-67869, ODU-3950 |
Automatic Updates - CPSDC |
UPDATE: Added Take 43 of Check Point Support Data Collector (CPSDC) for Scalable Platforms and Maestro Security Appliances. Refer to sk164414. |
|
PRJ-68481, PMTR-127053 |
CPView |
The CPVIEWD daemon may exit during startup. |
|
PRJ-68886, PRJ-68715, PMTR-127505 |
VPN |
Remote Access Endpoint Security Client may disconnect and reconnect approximately every 15 seconds. |
Take 127
Released on 18 March 2026 and declared as Recommended on 05 April 2026
|
ID |
Product |
Description |
|---|---|---|
|
Take 127 - Improvements and Resolved Issues |
||
|
PRJ-67137, ODU-3698 |
Automatic Updates - CPView |
UPDATE: Added Take 88 of CPViewExporter Release Updates. Refer to sk180521. |
|
PRJ-67143, ODU-3682 |
Automatic Updates - CPView |
UPDATE: Added Take 223 of CPotelcol (OpenTelemetry Collector) Release Updates. Refer to sk180522. |
|
PRJ-67134, ODU-3714, PRJ-66545, ODU-3619 |
Automatic Updates - Web SmartConsole |
UPDATE: New features and improvements are released in Take 163, Take 164 via self-updatable package. Refer to sk170314. |
|
PRJ-67187, ODU-3845 |
Automatic Updates - Policy Insights |
UPDATE: Added Take 87 of Policy Insights Release Updates. Refer to sk183421. |
|
PRJ-66140, PMTR-122910 |
Threat Prevention |
File downloads may get stuck at 100% completion when either the Anti-Virus or Threat Emulation Software Blade is actively scanning the file. See Critical Information for R81.20 Jumbo Hotfix Accumulator. |
Take 126
Released on 16 February 2026
|
ID |
Product |
Description |
|---|---|---|
|
Take 126 - New Functionality |
||
|
PRJ-64972, AAD-4768 |
VPN |
NEW: Added support for nested groups with host/range/network objects for split tunnel on exclusion/inclusion options. Refer to Dynamic Split Tunneling for SaaS Using Updatable Objects. |
|
Take 126 - Improvements and Resolved Issues |
||
|
PRJ-64530, PRHF-42420 |
Security Management |
UPDATE: In environments with hundreds of users and user groups, policy installation duration is significantly improved. |
|
PRJ-64004, PMTR-119902 |
SecureXL |
UPDATE: Improved Debug Filtering for specific flows in SecureXL User Space Mode (UPPAK) debug messages. |
|
PRJ-61644, PMTR-115879 |
Security Management |
In rare scenarios, CME (Cloud Management Extension) fails to run because of the Management API command " |
|
PRJ-56729, PRHF-35654 |
Security Management |
In some scenarios, Compliance Software Blade presents the results of Firewall Best Practices as "N/A". |
|
PRJ-62808, PRHF-40437 |
Security Management |
Running a Packet Mode search using the Management API for a service object fails to match the correct service rules. |
|
PRJ-63825, PRHF-41884 |
Security Management |
Best Practices may be missing or show incorrect results in the Security Best Practices view of the Compliance Software Blade. Refer to sk184239. |
|
PRJ-63947, PRHF-41979 |
Security Management |
Policy installation may fail when an inline layer is used more than once in the same policy and this error is displayed "Policy installation had failed due to an internal error. If the problem persists please contact Check Point support". |
|
PRJ-62086, PRHF-40511 |
Security Management |
In a Full High Availability (HA) ClusterXL deployment, the Check Point Portal does not display the Active Management Server as connected. As a result, Configuration Sharing is not working as expected in the Check Point Portal. |
|
PRJ-62988, PRHF-41049 |
Security Management |
In some scenarios, when updatable objects are used in the policy, policy installation fails with error code "0-2-2000245". Refer to sk183844. |
|
PRJ-61152, PRHF-39622 |
Security Management |
The Management API command " |
|
PRJ-62313, PRHF-40748 |
Security Management |
The FWM process may leak and then exit. |
|
PRJ-63589, PMTR-119207 |
CPView |
In some scenarios, the CPD daemon may exit with core dumps. |
|
PRJ-64205, PMTR-120236 |
CPView |
Apostrophes used in CPView strings cause CPDiag to fail. CPView History data is not shown. Refer to sk184873. |
|
PRJ-63226, PRHF-40388 |
Logging |
In some scenarios, disk space on the Security Management Server may increase significantly if PostgreSQL database log rotation does not function as expected. |
|
PRJ-64467, PRHF-42386 |
Logging |
In some scenarios, exporting logs to CSV in SmartView fails and the LOG_INDEXER process unexpectedly exits. Refer to sk184475. |
|
PRJ-65363, PMTR-122317 |
Logging |
Improper memory handling within the CPD daemon may result in unexpected process restart. |
|
PRJ-63383, PRHF-41504 |
Security Gateway |
In rare scenarios, the FWK process may exit when parsing an invalid SIP packet. |
|
PRJ-63234, PRHF-41491 |
Security Gateway |
Enabling the ForceAuth option for Remote Access VPN fails because of a typo in the saml_force_authn_override.sh script (sk182042). |
|
PRJ-59891, PRHF-38489 |
Security Gateway |
In rare scenarios, the FWK process may exit with core files because of a segmentation fault. |
|
PRJ-65052, PRHF-42145 |
Security Gateway |
In some scenarios, SNMPv3 monitoring fails on Data Plane when MDPS is enabled. Refer to sk184379. |
|
PRJ-65130, PMTR-108249 |
Security Gateway |
A PYTHON3.11 zombie process may be running in the background without impact on system performance. |
|
PRJ-59978, PRHF-38572 |
Threat Prevention |
In some scenarios, the Anti-Virus Software Blade fails to load external IoC feeds with an error "Can not load indicators feed without AV & AB Blades enabled, please enable AV & AB and try again", although the Anti-Virus and Anti-Bot Software Blades are enabled in a Maestro environment. Refer to sk183200. |
|
PRJ-60570, PRHF-39093 |
Content Awareness |
In some scenarios, a memory leak may occur in the DLPU process. The /var/log/ directory on the Active Cluster member reaches critical disk usage levels. |
|
PRJ-63610, PMTR-119233 |
IPS |
In rare scenarios, the IPS update package may become corrupted. This could cause the Security Gateway to load the initial policy instead of the active security policy. |
|
PRJ-66118 |
Anti-Virus |
In rare scenarios, the MTA process may crash when the Anti-Virus and Threat Emulation Software Blades are enabled. See Critical Information for R81.20 Jumbo Hotfix Accumulator. |
|
PRJ-66541, PMTR-123417 |
SSL Inspection |
SSL Network Extender (SNX) package installation fails with a verification error. See Critical Information for R81.20 Jumbo Hotfix Accumulator. |
|
PRJ-63691, PMTR-118658 |
SecureXL |
In some scenarios, the USIM_X86 process may become unresponsive. |
|
PRJ-62706, PRJ-61390 |
SecureXL |
When configuring PIM in Sparse Mode across multiple Virtual Systems on a VSX Security Gateway, the Security Gateway may crash, resulting in loss of connectivity. |
|
PRJ-63123, PMTR-118217 |
SecureXL |
The USIM process may exit with core dumps when debug information is collected. |
|
PRJ-62250, PMTR-116638 |
SecureXL |
SYN Defender (Synatk) does not recognize or enforce protections on bridge interfaces. |
|
PRJ-64300, PMTR-120376 |
SecureXL |
When SecureXL is working in User Mode (UPPAK) mode, some packets may sometimes appear twice in the output of the " |
|
PRJ-61338 |
SecureXL |
When SecureXL User Mode (UPPAK) mode may be disabled if some scripts are incorrectly edited. |
|
PRJ-62197, PMTR-114719 |
SecureXL |
When the Security Gateway is working with SecureXL in User Mode (UPPAK) mode, in some scenarios, the USIM process may exit and not restart, although it should. |
|
PRJ-66163 |
SecureXL |
A vmcore dump may be generated when enabling kernel debugs in Kernel Mode (KPPAK) while processing multicast traffic. |
|
PRJ-62565, PMTR-117103 |
Routing |
When SecureXL runs in User Mode (UPPAK), local IGMP and MLD multicast groups are not added to listener reports. This causes the output of the "show igmp groups" command to miss expected local group memberships. Additionally, the router does not send MLD reports for IPv6 multicast groups, breaking IPv6 Dynamic Routing. |
|
PRJ-65219, PRHF-42915 |
Gaia OS |
SNMP monitoring systems may report format errors related to the structure of the chkpnt.mib file. |
|
PRJ-63237, PRHF-41507 |
Gaia OS |
The SSHD process unexpectedly exits on the Multi-Domain Log Server (MLM) after an SSH session ends. Refer to sk183972. |
|
PRJ-59018, PMTR-110956 |
Gaia OS |
LACP bonds may continue passing traffic when running SecureXL User Space Mode and the value drops below the configured minimum number of links, although the bond interface should stop passing traffic. |
|
PRJ-65222, PRHF-42944 |
Gaia OS |
When integrating SNMP monitoring systems with Gaia OS, compilation of the GaiaTrapsMIB.mib file with the CHECKPOINT-MIB (chkpnt.mib) may fail. SNMP management stations or MIB browsers (such as HP OpenView, CA Spectrum, or HP Network Node Manager) return errors like "File GaiaTrapsMIB.mib failed to parse" or "ERROR : Cannot find symbol file://GaiaTrapsMIB.mib:Line XX:Column XX:multiDiskName". |
|
PRJ-55464, PRHF-33954 |
Gaia OS |
On a Scalable Platform Security Group, although an SHA hash type was configured for Gaia OS passwords with the Gaia gClish command " |
|
PRJ-47248, PMTR-91857 |
VPN |
Capsule VPN for Android / Capsule Connect for iOS / Capsule VPN Plugin for Windows lose access to internal resources. Refer to sk180661. |
|
PRJ-62343, PRHF-40386 |
VPN |
In some scenarios, only a partial list of traffic selectors may be sent during tunnel negotiation for Remote Access IKEv2 tunnels. |
|
PRJ-63696, PMTR-119366 |
VSNext |
When capturing packets on a warp interface in a Virtual System (VS) of a VSX Security Gateway with SecureXL User Mode (UPPAK) enabled, certain reply packets may not be captured, for example, ICMP Echo Replies to traffic directed at the Security Gateway. |
|
PRJ-65568, HEC-1345 |
VSNext |
In the VS0 context, physical resources per VS may not be visible when using the " |
|
PRJ-64069, PRHF-41754 |
SDWAN |
In SD-WAN overlay environment when there is no matching rule, the /var/log/messages files may contain many the errors " |
|
PRJ-64392, PMTR-119685 |
Scalable Platforms |
When adding a subordinate to an LACP bond, a member may go down, which triggers a site failover. |
|
PRJ-62493, PMTR-119734 |
Scalable Platforms |
In a Maestro Security Group with a Threat Prevention policy applied, performing an SIC reset may cause non-Single Management Object (non-SMO) Security Group members to enter a Down state. The affected members display an Anti-Malware pnote as the reason for the state change. |
|
PRJ-64387, PMTR-120706 |
Scalable Platforms |
In a Maestro deployment, the $PPKDIR/conf/adpkern.conf file may not be synchronized across Security Group members. |
|
PRJ-65969, PMTR-92125 |
Scalable Platforms |
After creating a bridge interface via Gaia Portal and rebooting, the Security Gateway state is down. |
|
PRJ-44882, PRHF-21006 |
Carrier Security |
GTPv1 traffic may be dropped with code description "Invalid IE length value", "GTP info: Parsing IE type 133 failed". |
Take 122
Released on 07 January 2026
|
ID |
Product |
Description |
|---|---|---|
|
Take 122 - New Functionality |
||
|
PRJ-64538, PMTR-119998 |
VPN |
NEW: It is now possible to add host/range/network objects for split tunnel on exclusion/inclusion options. Refer to R81.20 Remote Access VPN Administration Guide > Dynamic Split Tunneling for SaaS Using Updatable Objects. |
|
Take 122 - Improvements and Resolved Issues |
||
|
PRJ-62102, PMTR-116716 |
Harmony Endpoint |
UPDATE: Check Point response to Apache Tomcat CVEs on Harmony Endpoint Security Management Server - CVE-2025-31651 and CVE-2025-31650. Refer to sk183615. |
|
PRJ-62360, PRHF-40849 |
Security Management |
UPDATE: Policy verification error messages are now improved for scenarios when verification fails because of updatable objects, dynamic objects, and Domain objects in a Remote Access VPN community. |
|
PRJ-63718, PMTR-119125 |
Gaia OS |
UPDATE: Added ability to use the ' |
|
PRJ-64184, PMTR-118961 |
Security Management |
UPDATE: JRE is updated from version 8.0_8.35 to version 8.0_8.50 |
|
PRJ-63472, PMTR-117101 |
Security Management |
UPDATE: SmartTasks are now supported in the System Domain of Multi-Domain Security Management. This feature enables the automation of system-domain operations, reducing manual tasks and enhancing reliability. Refer to R82 Security Management Administration Guide > Preferences and Management Settings > SmartTasks. |
|
PRJ-63365, MGMTTECH-621 |
Security Management |
UPDATE: Enhanced packet search in SmartConsole with three IP address modes:
|
|
PRJ-63735, PMTR-119349 |
Security Gateway |
UPDATE: Added a new kernel parameter " |
|
PRJ-59065, PRHF-32989 |
CloudGuard Network |
UPDATE: CloudGuard Controller status in SmartConsole is now automatically updated. |
|
PRJ-65287, ODU-3387 |
Automatic Updates - Web SmartConsole |
UPDATE: New features and improvements are released in Take 157 via self-updatable package. Refer to sk170314. |
|
PRJ-62554, PRHF-40800 |
Security Management |
In SmartConsole, if the Task pane has no tasks to show, the Task pane incorrectly shows an "Error retrieving results" message. |
|
PRJ-62992, PRHF-41249 |
Security Management |
Regenerating a token for a Security Gateway in Smart-1 Cloud may fail with an unclear validation message "No error in result from fwm command: [gen-pki-cert-req]". |
|
PRJ-62777, PRHF-41168 |
Security Management |
In rare scenarios, High Availability synchronization might fail with a connectivity error. |
|
PRJ-60374, PRHF-38836 |
Security Management |
VMcore crashes may occur with core dumps of the LOG_INDEXER, LOG_EXPORTER, and JAVA processes on the Security Management Server, causing high CPU utilization. |
|
PRJ-62550, PMTR-117467 |
Security Management |
In rare scenarios, the Security Management Server fails to start after performing a "Revert to Revision" operation. |
|
PRJ-64884, PRHF-42660 |
Security Management |
In rare scenarios, login using Management API fails with a timeout and the " |
|
PRJ-60526, PRHF-38743 |
Security Management |
When running the Management API command " |
|
PRJ-62531, PRHF-40750 |
Security Management |
Importing a large policy package fails with validation and API errors on the Multi-Domain Security Management Server. Refer to sk183697. |
|
PRJ-65808, PRHF-43517 |
Security Management |
The Management API command " |
|
PRJ-60488, PRHF-39032 |
Security Management |
In some scenarios, when Configuration Sharing is enabled, audit logs may show failed login attempts to the CPM Server after publishing changes. |
|
PRJ-61808, PRHF-40205 |
Security Management |
When a user with read-only permissions for Global Domains (for example, a user with the Global Manager profile) connects to the System Domain in SmartConsole, the SmartConsole status bar incorrectly displays the user as having read-write permissions. |
|
PRJ-59750, PRHF-38490 |
Security Management |
In some scenarios, creating a Standby Domain Security Management Server fails with a "You do not have the permissions to complete this action" message. |
|
PRJ-59515, PRHF-37612 |
Security Management |
In rare scenarios, after an IPS update, all protections are set to Staging mode in Threat Profiles configured with "Set activation as Staging mode". |
|
PRJ-62194, PMTR-116551 |
Security Management |
When using the Management API command " |
|
PRJ-64739, PMTR-121337 |
Security Management |
When the Dynamic URL List feature is enabled, Security Gateway may crash during policy installation. See the Critical Information for R81.20 Jumbo Hotfix Accumulator. |
|
PRJ-61327, PRHF-39881 |
Security Management |
In rare scenarios, an IPS update fails because of duplicate objects. |
|
PRJ-63543, PMTR-119007 |
Multi-Domain Security Management |
On the Multi-Domain Security Management Server, when staging is cleared for an IPS protection in the Global Domain, any staging configuration for that same protection in the local Domain (within a Global profile) remains unchanged during policy assignment. |
|
PRJ-64104, PMTR-120043 |
Multi-Domain Security Management |
The Configuration Sharing feature does not work as expected with VSX Gateways on a specific Domain. |
|
PRJ-65235, PMTR-121265 |
Multi-Domain Security Management |
In certain scenarios, an upgrade of the Multi-Domain Security Management Server may fail with a "During synchronization a new object was found through a relationship that was not marked cascade PERSIST" message.
|
|
PRJ-63792, PRHF-41803 |
Multi-Domain Security Management |
On Multi-Domain Security Management Servers, custom Compliance Software Blade Best Practices may differ between the Multi-Domain Security Management level and the Domain level. |
|
PRJ-55866, PRHF-34777 |
CPView |
CPView may display incorrect concurrent connection statistics (negative values) because of improper aggregation of connection data during a Cluster failover. |
|
PRJ-64040, PMTR-118032 |
Security Gateway |
In a rare scenario, when running the " |
|
PRJ-62131, PRHF-40631 |
Security Gateway |
The FWK memory leak may occur during FTP connections with high file volume. Refer to sk183662. |
|
PRJ-56832, PRHF-35857 |
Security Gateway |
Potential memory leak in the CPD process. |
|
PRJ-60990, PMTR-110282 |
Security Gateway |
In some scenarios, when SecureXL is working in User Mode (UPPAK) mode, QoS service is unable to start, displaying the "QoS is not responding. Verify that QoS is installed on the gateway" error. Refer to sk183752. |
|
PRJ-64396, PMTR-120304 |
Security Gateway |
When changing the CoreXL configuration (for example, adjusting the number of SND and FW instances), a network interface may unexpectedly go down. This can cause traffic disruption. |
|
PRJ-64492, PMTR-120932 |
Security Gateway |
The Security Gateway may drop packets and potentially crash because of memory allocation issues. |
|
PRJ-62919, PMTR-117427 |
Security Gateway |
Infinite routing loop may occur because of TTL handling in SecureXL Medium Path. Refer to sk183728. |
|
PRJ-63941, PRHF-41674 |
Security Gateway |
In a Maestro Security Group in the VSX mode, the Layer 2 MAC address table in Bridge Mode (Bridge Forwarding Database) entries may be incorrectly deleted, causing connectivity issues. |
|
PRJ-65818, PMTR-122907 |
Security Gateway |
When using a Security Gateway as a Proxy "Non-transparent" and HTTPS Inspection is set to "Inspect" with "X-Forward-For header", video playback on YouTube fails. See Critical Information for R81.20 Jumbo Hotfix Accumulator. |
|
PRJ-63029, PMTR-117588 |
Security Gateway |
Web browsing is slow, or pages freeze after an upgrade when using Security Gateway as an HTTP/HTTPS Proxy. Refer to sk184683. |
|
PRJ-57793, TEMTA-1237 |
Threat Prevention |
In some scenarios, Mail Transfer Agent (MTA) file type classification may be inaccurate when both MTA and Threat Emulation are enabled. |
|
PRJ-61473, PMTR-115790 |
IPS |
In some conditions, the Packet Capture may be missing from IPS logs in SmartConsole. |
|
PRJ-63324, PRHF-41553 |
HTTPS Inspection |
In some traffic flows, packets containing certain headers may be dropped regardless of how the non-compliant HTTP Inspection is configured. |
|
PRJ-62830, PRHF-41229 |
Mobile Access |
In rare scenarios, Mobile Access SmartConsole Logs may not match views/queries, including the "MAC address" or "Methods" field names. |
|
PRJ-62836, PRHF-39978 |
Mobile Access |
Mobile Access Software Blade may incorrectly terminate Guacamole-based clientless RDP/SSH sessions due to client idleness. |
|
PRJ-60481, PMTR-110991 |
Mobile Access |
Mobile Access SSL Network Extender (SNX) remote users with Windows 11 24H2 fail to connect. Refer to sk182923. |
|
PRJ-58679, PMTR-110608 |
SecureXL |
Concurrent NAT64 and NAT46 operations may cause packet processing threads to become unresponsive because of improper issue handling in the SIM v6 kernel module. |
|
PRJ-59484, PRHF-37901 |
SecureXL |
When using DOS Deny List, CPU usage may increase. |
|
PRJ-59481, PRHF-38329 |
SecureXL |
When using DOS Deny List, a firewall kernel module memory leak may occur. |
|
PRJ-64329, PMTR-120628 |
SecureXL |
When using MDPS with IPv6 disabled on the Security Gateway side, the Security Gateway may leak IPv6 packet buffers instead of dropping them. Refer to sk184419. |
|
PRJ-43137, STRM-499 |
SecureXL |
In rare scenarios, Fast Accel flow may result in SecureXL Kernel Space Mode (KPPAK) crash. |
|
PRJ-64142, PMTR-120092 |
SecureXL |
In a Maestro setup, the USIM process may exit under high load when handling encrypted VPN traffic with the other Security Gateway. |
|
PRJ-60844, PRHF-39251 |
SecureXL |
In some scenarios, the Security Gateway may crash when IoC feed contains an IPv6 address. |
|
PRJ-62420, PMTR-115630 |
SecureXL |
In some scenarios, the Security Gateway may crash. |
|
PRJ-64333, PMTR-120460 |
SecureXL |
Potential USIM process exit when using virtio devices and changing the MTU value. |
|
PRJ-64456, PMTR-120707 |
SecureXL |
Traffic may be disrupted when reconfiguring the virtual hardware interfaces. |
|
PRJ-64880, PRHF-42050 |
SecureXL |
When a VLAN interface is configured as the synchronization interface for the VSX cluster and SecureXL User Mode (UPPAK) is enabled, Virtual Systems on non-active members cannot forward traffic to Virtual Systems on the active member through a warp interface. |
|
PRJ-64612, PMTR-121137 |
SecureXL |
Multiple threads may be performing a routing next hop lookup for the same next hop at the same time, causing a rare race condition and USIM-related processes to exit. |
|
PRJ-57693, PMTR-109360 |
SecureXL |
Multiple " |
|
PRJ-61615, PMTR-116026 |
SecureXL |
The USIM process may exit when multiple routes are using the same nexthop and the nexthop is not yet resolved |
|
PRJ-62959, PMTR-117546 |
SecureXL |
The USIM process may exit when viewing the |
|
PRJ-62907, PMTR-118106 |
SecureXL |
The USIM process may exit during the FWK restart. |
|
PRJ-61311, PMTR-115500 |
SecureXL |
In some scenarios, the VSX Security Gateway may not route traffic correctly for non-accelerated connections and accelerated connections that require Active or Passive Streaming when SecureXL User Mode (UPPAK) is enabled. |
|
PRJ-61826, PRHF-40390 |
SecureXL |
Interface cards are not displayed in the output of the Gaia Clish command " |
|
PRJ-61622, PMTR-116027 |
SecureXL |
Rate Limiting policy installation (when the Rate Limiting policy is updated or country code data is updated) may take a long time. |
|
PRJ-65295, PMTR-122243 |
SecureXL |
SecureXL hardware offload fails when a bond (link aggregation) is configured with two UP (active) member interfaces. See Critical Information for R81.20 Jumbo Hotfix Accumulator. |
|
PRJ-63261, PRHF-29936 |
Gaia OS |
The Gaia Clish command " |
|
PRJ-62337, PRHF-40826 |
Gaia OS |
LLDP data formatting issues when querying using SNMP. Refer to sk183733. |
|
PRJ-60765, PRHF-39354 |
Gaia OS |
DHCP traffic peaks may cause high utilization, potentially impacting connectivity. |
|
PRJ-62465, PRHF-40902 |
Gaia OS |
SNMP Power Supply trap reports false "Down" status. Refer to sk183702. |
|
PRJ-61976, PRHF-40429 |
Gaia OS |
When taking snapshots of the Security Group Members, some of them may crash, the "the active connections feature is currently enabled in the SmartView Tracker and due to high load it is making sync too slow to function properly. Therefore, 319489 active connection updates were dropped and no sync updates were lost" |
|
PRJ-62534, PRHF-40972 |
Gaia OS |
Gaia Portal Session Cookie missing the SameSite attribute. Security scanners and penetration tests flag the missing SameSite attribute as a vulnerability. Refer to sk183645. |
|
PRJ-62040, PRHF-40558 |
Gaia OS |
The MONITORD process unexpectedly exits on Security Gateways. Refer to sk184076. |
|
PRJ-43417, PMTR-89314 |
VPN |
The VPN granular encryption link is deleted when changing Security Gateway role. |
|
PRJ-64410, AAD-4359 |
VPN |
VPN traffic outage may occur in ClusterXL environments after a Cluster failover. |
|
PRJ-62635, PRHF-40410 |
VSX |
Services fail after Virtual System failover in Maestro dual-site environment using the Same Virtual MAC feature. Refer to sk183956 and sk184194. |
|
PRJ-64095, PRHF-38127 |
VSX |
In large scale environments, the " |
|
PRJ-50961, PMTR-97170 |
VSX |
Creating a Virtual System (VS) with an IPv6-only interface (without configuring IPv4) succeeds without any warning or error. However, after the VS is created and modified, pushing the configuration fails with "In a VSX cluster, IPv6-only interfaces are not supported. Virtual System Processing Completed with Errors". |
|
PRJ-60523, PRHF-38972 |
VSX |
On a VSX Cluster Member, the FWK process may exit with a core dump and cause BGP session drops, resulting in 10-15 second network outages. Error messages in the core dumps and logs include TLS-related backtraces and memory corruption errors. |
|
PRJ-63507, PRHF-41452 |
CloudGuard Network |
Registration of an updated Data Center asset to the Security Management Server may fail. |
|
PRJ-59518, PMTR-111921 |
SD-WAN |
A Virtual System may lose connectivity on the Backup and the Standby member when route-based traffic is configured with specific SD-WAN configurations in VSX environments. |
|
PRJ-59584, PRHF-38432 |
Scalable Platforms |
After enabling Maestro Fastforward on a Security Group, traffic matching relevant rules is routed to the default Security Gateway instead of the correct nexthop because the static route is missing from the /etc/mlx_routing.json file on the Maestro Orchestrator. The Orchestrator shows 200 routes and fails to pick up the interface's routes, despite the interface topology is configured as "according to routes" in SmartConsole. |
|
PRJ-63555, PRHF-41584 |
Scalable Platforms |
Running the command " |
|
PRJ-63617, PRHF-41710 |
Scalable Platforms |
The " |
|
PRJ-63475, PMTR-119026 |
Scalable Platforms |
Installing policy to the Maestro Security Group under extreme load with Resource Separation may fail. |
|
PRJ-64592, PMTR-121110 |
Scalable Platforms |
In rare scenarios, in a Maestro setup, traffic interruption may occur after Security Gateway reboots when the Gaia Database is corrupted. |
|
PRJ-62567, PMTR-119109 |
Scalable Platforms |
When the Maestro Fastforward feature is enabled, policy installation may fail with a "Maestro acceleration (MXL) failed, reason: General error. Please check /var/log/acl_cli.log on the security group SMO for more details" message instead of indicating that it is a policy parser issue. |
|
PRJ-64400, PMTR-120751 |
Scalable Platforms |
A configuration issue may cause link flapping on bonded uplink interfaces when using Maestro with SecureXL User Mode (UPPAK) enabled. The bond interface may fail to establish connectivity, with the physical interface reporting link status as up but showing unknown speed values. |
|
PRJ-54677, PMTR-91449 |
Scalable Platforms |
In a Maestro environment, BFD (Bidirectional Forwarding Detection) sessions may flap, slowing down the connections. |
|
PRJ-64803, PMTR-109427 |
Scalable Platforms |
In rare scenarios, in a Maestro environment, during the Nano-Agent installation, a configuration mismatch between Security Group Members may cause an affected SGM to enter a DOWN state and generate a configuration PNOTE (problem notification). |
|
PRJ-62817, PRHF-41165 |
Scalable Platforms |
In a Maestro VSX VSLS Cluster, after setting the kernel parameters " |
|
PRJ-62899, PMTR-118072 |
Scalable Platforms |
In rare scenarios, enabling interface monitoring may cause the FWK process to exit. |
|
PRJ-65635, PMTR-122661 |
Scalable Platforms |
In the Maestro and Chassis environment with multiple Virtual Systems (VSs) and updatable objects, the disk may reach full capacity. Refer to sk184576. See Critical Information for R81.20 Jumbo Hotfix Accumulator. |
|
PRJ-64503, CST-399 |
Carrier Security |
Policy installation fails with an internal error when the Security Gateway policy includes rules that match a specific Access Point Name (APN) for GTPv0 or GTPv1 traffic. |
|
PRJ-63852, PRHF-31869 |
Carrier Security |
GTP traffic may not be well balanced, some CPU cores may be overloaded while others are underutilized, leading to performance issues. |
|
PRJ-56451, PRHF-31961 |
Carrier Security |
SAM rules fail to gracefully terminate PDP context when the timer expires. |
|
PRJ-56447, PRHF-31901 |
Carrier Security |
Running the " |
Take 120
Released on 20 November 2025 and declared as Recommended on 21 December 2025
|
ID |
Product |
Description |
|---|---|---|
|
Take 120 - Improvements and Resolved Issues |
||
|
PRJ-63741, PMTR-119534 |
Gaia OS |
UPDATE: Check Point response to CVE-2019-6109, CVE-2019-6110, CVE-2019-6111. Refer to sk65269. |
|
PRJ-61018, FMW-5200 |
Security Gateway |
UPDATE: Improve shared memory packet flow and performance. |
|
PRJ-62747, PRHF-40593 |
Threat Prevention |
UPDATE: Added an option to disable enforcement on internal interfaces when IOC indicators are loaded. To configure this option, add or modify " |
|
PRJ-51645, PRHF-31201 |
Gaia OS |
UPDATE: Added mq_mng.elg to the /etc/cpshell/log_rotation.conf file (sk113241). |
|
PRJ-63581, PRHF-41198, PMTR-119173 |
Harmony Endpoint |
UPDATE:
|
|
PRJ-64246, ODU-3159, PRJ-64544, ODU-3225 |
Automatic Updates - Policy Insights |
UPDATE: Added Take 77 and Take 78 of Policy Insights Release Updates. Refer to sk183421. |
|
PRJ-64476, ODU-3143, PRJ-64637, ODU-3259 |
Automatic Updates - Web SmartConsole |
UPDATE: New features and improvements are released in Take 155 and Take 156 via self-updatable package. Refer to sk170314. |
|
PRJ-64547, ODU-3175 |
Automatic Updates - HCP |
UPDATE: Added Update 24 of HealthCheck Point (HCP) Release. Refer to sk171436. |
|
PRJ-64585, ODU-3199, PRJ-64742, ODU-3267 |
Automatic Updates - CPView |
UPDATE: Added Take 52 and Take 53 of CPquid (QUID) Release Updates. Refer to sk181458. |
|
PRJ-64828, ODU-3235 |
Automatic Updates - Threat Prevention |
UPDATE: Added Update 27 of Autonomous Threat Prevention Management integration Release. Refer to sk167109. |
|
PRJ-64904, ODU-3275 |
Automatic Updates - CPView |
UPDATE: Added Take 210 of CPotelcol (OpenTelemetry Collector) Release Updates. Refer to sk180522. |
|
PRJ-60643, PRHF-39082 |
Security Management |
In some scenarios, the warning "Threat Prevention Policy: For better performance, blade exception rules with the action 'Inactive' should be placed above other exception rules" appears in SmartConsole even though no exception rules violate the recommended configuration. |
|
PRJ-53003, PMTR-101178 |
Security Management |
When running "mgmt_cli show central-license", it fails with "code: "generic_error" instead of returning the central license information. |
|
PRJ-63540, PRHF-41609 |
Multi-Domain Security Management |
In a Multi-Domain Security Management environment, when opening the License tab of a Security Gateway object in SmartConsole, the "Security Gateway was not found" error may be shown. |
|
PRJ-63597, PRHF-41369 |
CPView |
VSX CPU Usage calculation on multi-core devices may be incorrect. |
|
PRJ-56659, PMTR-107477 |
CPView |
In VS setups, the cpviewd.elg file grows excessively and fills the /var/log/ partition, causing the Gateway to become unreachable. |
|
PRJ-63313, PRHF-41539 |
Security Gateway |
The RAD daemon may unexpectedly exit. |
|
PRJ-62825, PMTR-117944 |
Security Gateway |
When the Gaia Portal accessibility is configured as "According to Firewall policy", access may be denied because of a match on an implied rule with the "Accept" action. |
|
PRJ-63486, PRHF-41690 |
Security Gateway |
Mirror and Decrypt feature may not function as expected when HyperFlow is enabled. |
|
PRJ-62882, PRHF-41266 |
Security Gateway |
In some scenarios, when HyperFlow is enabled, websites that use HTTP2 protocol do not load properly. |
|
PRJ-63820, PRHF-41922 |
Security Gateway |
When a Security Gateway is configured in Bridge Mode, a memory leak may occur. |
|
PRJ-63378, PRHF-41472 |
Security Gateway |
Threat Emulation on ICAP Server fails with "There was an Unexpected Internal error, Please try again later". Refer to sk184228. |
|
PRJ-63087, PRHF-40865 |
Security Gateway |
HTTP parsing fails with the "Illegal header format detected: Invalid header field" error. |
|
PRJ-63860, PMTR-113368, TPDO-3593 |
Threat Prevention |
In a rare scenario, SmartConsole does not display a notification when the IP reputation feed for the Anti-Bot Software Blade fails to load. |
|
PRJ-61196, PRHF-39537, PMTR-115422 |
Threat Prevention |
In rare scenarios, the Anti-Virus Software Blade fails to fetch the external intelligence feed because of an authentication failure. |
|
PRJ-54475, PRHF-33776 |
Identity Awareness |
In a rare scenario, the PDPD daemon may unexpectedly exit while updating identity session timers. |
|
PRJ-63885, PRHF-41980 |
Application Control |
In the Application Layer, an "any-any" rule (from any source to any destination, using any service) with long-lived connections may cause excessive memory usage. Refer to sk184196. |
|
PRJ-63431, PMTR-118983 |
URL Filtering |
In rare scenarios, IoC resources are not loaded or distributed as expected. |
|
PRJ-62488, PMTR-111667 |
SecureXL |
In some scenarios, the Security Gateway delays offloading a connection to the LightSpeed hardware-accelerated card when SecureXL User Mode (UPPAK) is enabled. |
|
PRJ-62913, PMTR-118130 |
SecureXL |
In some scenarios, after an update of the OS route configuration, there may be a significant delay in traffic passing through the Security Gateway when SecureXL works in the User Mode (UPPAK). Refer to sk182740. |
|
PRJ-63470, PMTR-118999 |
SecureXL |
In some scenarios, a VSX Gateway may not optimally pass traffic from a Virtual System to a Virtual Router or Virtual Switch when connections are accelerated in SecureXL. |
|
PRJ-63856, PMTR-119616 |
SecureXL |
When tunnel is established and traffic is running, the USIM process may exit every 15-20 minutes and cause a failover of the second member. |
|
PRJ-63171, PMTR-118518 |
SecureXL |
In some scenarios, when a Security Gateway, running in SecureXL User Mode (UPPAK), receives IPv6 Neighbor Discovery Protocol (NDP) packets from the network, it may not properly forward or process them correctly. |
|
PRJ-61340, PMTR-115628 |
SecureXL |
In some scenarios, there is significant latency when passing traffic through bridge interfaces configured on a Security Gateway when SecureXL User Mode is enabled. |
|
PRJ-63771, PMTR-119562 |
SecureXL |
VPN cluster members may crash after a cluster failover with BGP enabled and the exit of the USIM process. |
|
PRJ-63601, PMTR-119184 |
SecureXL |
Security Gateway unexpectedly crashes with kernel logs showing segmentation faults in the USIM_x86 process. Refer to sk184340. |
|
PRJ-63414, PMTR-118686 |
SecureXL |
In a rare scenario, packets with malformed message headers cause the Security Gateway to crash. |
|
PRJ-63953, PRJ-63818 |
VSX |
In a rare scenario, the FWM process may exit on the Security Management Server managing VSX Gateways/Clusters. |
|
PRJ-62077, PMTR-107936 |
VSX |
After enabling Mobile Access Software Blade on a Virtual System, Mobile Access services do not run, and the Mobile Access portal cannot be reached. Refer to sk183256. |
|
PRJ-56048, PRHF-34615 |
Gaia OS |
After an upgrade from R81 to R81.20, backup on a VSX Gateway may fail with the "Cannot complete the backup process: not enough space in /var/log/CPbackup/backups" error. |
|
PRJ-63210, PRHF-41484 |
Gaia OS |
After an upgrade, the scheduled SFTP backup configuration is not fully displayed in the "show configuration" output. Refer to sk184093. |
|
PRJ-62007, SDWANGW-4494 |
SD-WAN |
In rare scenarios, policy installation causes traffic matched by the "prefer local breakout" rule to be incorrectly routed through the underlay private link instead of the overlay. |
|
PRJ-62761, PMTR-117824, SDWANGW-4233 |
SD-WAN |
In rare scenarios, new connections may continue matching "Prioritize Local Breakout" despite low ISP quality that should trigger a switch to backhaul. |
|
PRJ-61892, PRHF-39789 |
Harmony Endpoint |
Posture Management scans initiated manually or automatically remain stuck at the "Scan initialize" status. This issue affects all devices with Endpoint Security installed. |
|
PRJ-61895, PRHF-39851 |
Harmony Endpoint |
Security Management Server and Policy Server may lose connectivity after uploading production licenses. Running "cplic print -x" on the Policy Server shows no output, while the Security Management Server output is uploaded for review. |
|
PRJ-63037, PMTR-118317, EPS-60640 |
Harmony Endpoint |
After upgrading the Endpoint Security Client from a non-compliant version to E88.62 on Azure AD devices (protected by Full Disk Encryption), multiple clients may enter a disconnected state. |
|
PRJ-63461, PMTR-119023, EPS-60858 |
Harmony Endpoint |
Full Disk Encryption user update password fails with auth_type 3 (certificate and password). |
|
PRJ-62613, PMTR-117583 |
Scalable Platforms |
Connectivity issues may occur between Maestro sites that are connected through Cisco OTV switches. Refer to sk183666. |
|
PRJ-60968, PRHF-39103 |
Scalable Platforms |
In rare scenarios, "asg stat -i chassis_monitor" returns "0" even when the cluster did not start, causing " |
Take 119
Released on 27 October 2025 and declared as Recommended on 18 November 2025
|
ID |
Product |
Description |
|---|---|---|
|
Take 119 - New Functionality |
||
|
PRJ-62667, PMTR-116161 |
Gaia OS |
NEW: Hardened the authentication in the Gaia Cloning Group. Important - After the installation of this Jumbo Hotfix Accumulator Take, you must follow these steps in each current Cloning Group:
For more information, see the Gaia Administration Guide > Chapter "System Management" > Section "Cloning Group". |
|
PRJ-62142, PMTR-116780 |
CPView |
NEW: Added the new Skyline metric " |
|
Take 119 - Improvements and Resolved Issues |
||
|
PRJ-63002, PMTR-117744 |
Gaia OS |
UPDATE: Check Point response to CVE-2025-32728 - The SSH directive "DisableForwarding" fails to disable "X11 Forwarding" and "Agent Forwarding". Refer to sk183394. |
|
PRJ-59093, PRHF-37840 |
Security Management |
UPDATE: It is possible now to run the Management API command " |
|
PRJ-62340, PMTR-115295 |
CPUSE |
UPDATE: Added an HCP test to check whether the CPAC-2-100/25F, CPAC-2-100/25F-B, CPAC-2-40F-B, or CPAC-2-40F-C FW firmware is safe to update from R81.10 to a higher version. Refer to sk182403. |
|
PRJ-61801, PRHF-39531 |
Logging |
UPDATE: The SOLR process (listening on port 8211) no longer accepts connections using the TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA cipher suite. Refer to sk181683. |
|
PRJ-62728, PMTR-117738 |
Logging |
UPDATE: Improved the design of the Security Checkup report in SmartView. |
|
PRJ-62472, PMTR-117312 |
IPS |
UPDATE: HTTP/1.1 requests missing host headers are now processed by the non-compliant HTTP Protection feature (Strict Parsing option). Previously, such requests were dropped immediately. Refer to sk183569. |
|
PRJ-60141, PMTR-87460, PRJ-60463, PMTR-114416 |
SecureXL |
UPDATE: SecureXL Rate Limiting rules for DoS Mitigation now support these parameters with automatic IP range updating enabled by default:
Refer to sk112454. |
|
PRJ-61324, PRHF-39697 |
CloudGuard Network |
UPDATE: Updated supported regions in OCI (Oracle Cloud Infrastructure) data centers and changed the fetching domain logic. |
|
PRJ-63517, ODU-3040 |
Automatic Updates - CPView |
UPDATE: Added Take 201 of CPotelcol (OpenTelemetry Collector) Release Updates. Refer to sk180522. |
|
PRJ-63521, ODU-3064, PRJ-63712, ODU-3111 |
Automatic Updates - Web SmartConsole |
UPDATE: New features and improvements are released in Take 149 and Take 150 via self-updatable package. Refer to sk170314. |
|
PRJ-63781, ODU-3095 |
Automatic Updates - Policy Insights |
UPDATE: Added Take 76 of Policy Insights Release Updates. Refer to sk183421. |
|
PRJ-63899, ODU-3127 |
Automatic Updates - CPView |
UPDATE: Added Take 50 of CPquid (QUID) Release Updates. Refer to sk181458. |
|
PRJ-62243, PMTR-116383 |
Security Management |
In rare scenarios, the FWM process on the Security Management Server may unexpectedly exit, creating a core dump file because of the incorrect license update. |
|
PRJ-57301, PRHF-35813 |
Security Management |
In rare scenarios, the User Check policy is not updated during the Accelerated Policy installation. |
|
PRJ-62664, PRHF-41094 |
Security Management |
When Global Domain Assignment removal fails with the "Global Domain Assignment failed: object XXX could not be deleted because it is referenced by other objects" error, only a partial list of the referencing objects is displayed in the error message. |
|
PRJ-61897, PRHF-40211 |
Security Management |
After editing an Interoperable Device object, the number of changes of the current session presented in SmartConsole may be inaccurate. |
|
PRJ-63199, PMTR-118466 |
Security Management |
In rare scenarios, the FWM process may not start automatically after an unexpected exit. |
|
PRJ-62637, PRHF-40995 |
Security Management |
After an IPS update, reassigning global policies may take a long time. |
|
PRJ-61805, PRHF-40186 |
Security Management |
In rare scenarios, discarding an old session fails with an "An internal error has occurred" message. |
|
PRJ-59981, PRHF-38312 |
Security Management |
When migrating a Security Management Server to a Multi-Domain Security Management Server more than once, the operation fails with the "got at least one duplicate UID in requested list" error. |
|
PRJ-63489, MGMTTECH-516 |
Security Management |
Security Management Server upgrade may fail when running out of memory. |
|
PRJ-63104, PMTR-118295 |
CPView |
In a VSX environment, the CPVIEWD daemon may exit and produce a core dump file. |
|
PRJ-47565, PRHF-29330 |
CPView |
In CPView > Network > Traffic > in the Concurrent Connections table, the number of non-TCP connections is higher than shown in the output of the " |
|
PRJ-62753, PRHF-41169, PMTR-117799, PRHF-41238 |
CPView |
The CPVIEW_SERVICES process may exit because of incorrect database handling. |
|
PRJ-60004, PRHF-38733 |
Security Gateway |
Policy installation may fail when an updatable object is processed incorrectly. |
|
PRJ-61858, PRHF-40380 |
Security Gateway |
When configuring NAT64 rules for specific targets, the rules may fail to apply. Return traffic may be dropped. |
|
PRJ-61436, PRHF-39815 |
Security Gateway |
In Maestro Dual Site in the VSX VSLS mode, although CoreXL Dynamic Balancing is enabled, CoreXL does not change the number of Firewall instances and SND instances during traffic load. Refer to sk183485. |
|
PRJ-62016, PRHF-40483 |
Security Gateway |
The RAD daemon may unexpectedly exit on VSX Gateways. |
|
PRJ-59450, PRHF-38172 |
Security Gateway |
An application may fail to match correctly when URL Filtering is configured in Hold Mode. |
|
PRJ-60294, PRHF-28489 |
Security Gateway |
In rare scenarios, the Security Gateway may drop the traffic with "up_manager_fw_handle_first_packet: cmi_context_exec_with_chain_connkey() failed". Refer to sk182506. |
|
PRJ-62894, PRHF-41242 |
Security Gateway |
HTTP/2 connection may fail when Threat Prevention Software Blades are enabled with Deep Inspection because of a protocol error. Refer to sk183822. |
|
PRJ-62562, PRHF-41025 |
Security Gateway |
ICAP Server may fail to process multipart HTTP requests (when request body is split into multiple parts, each with its own headers and content). |
|
PRJ-63022, PMTR-117719 |
Threat Prevention |
In a rare scenario, the DLPU process may exit during traffic inspection when holding a connection. |
|
PRJ-58193, PRHF-37156 |
Threat Prevention |
In some scenarios, the Anti-Virus Software Blade fails to parse and load external IoC observables of type IPv6. Refer to sk182947. |
|
PRJ-61618, PRHF-40065 |
Threat Prevention |
The testing of external IoC feed connectivity from SmartConsole fails because of improper retrieval of configuration values. |
|
PRJ-60586, PRHF-38756 |
Identity Awareness |
Users on shared Servers (MUH v1 and v2) cannot access resources they should have permission to use. When this happens, the Security Gateway fails to recognize the user's identity and does not apply the correct access permissions. Refer to sk183268. |
|
PRJ-60982, PRHF-39261 |
Identity Awareness |
Entra ID (Azure ID) authorization may fail when more than one tenant is configured for authorization and the "fetch-user-group"s or "fetch-machine-groups" mode is enabled. |
|
PRJ-58058, PRHF-36813 |
IPS |
In rare scenarios, the source IP shown in the IPS detection log is invalid. Refer to sk182914. |
|
PRJ-62811, PRHF-41088 |
IPS |
When using Gateway as a Proxy "Non-transparent" and HTTPS Inspection is set to "inspect" with "X-Forward-For header", video playback on YouTube fails. |
|
PRJ-63061, PMTR-118347 |
Anti-Virus |
In a rare scenario, the Security Gateway may crash during traffic inspection. |
|
PRJ-63025, PMTR-116661 |
Anti-Virus |
In some scenarios, the Anti-Virus Software Blade reaches a timeout when inspecting Domains because of latency in the RAD daemon. |
|
PRJ-61302, PRHF-39517 |
Anti-Virus |
In a rare scenario, the memory consumption of the DLPU process continuously increases. |
|
PRJ-44982, PRHF-27785 |
Anti-Virus |
In rare scenarios, the Anti-Virus Software Blade cache may reach its capacity. |
|
PRJ-61582, PMTR-115396 |
ClusterXL |
6in4 tunnels are shown in Down state when monitored using the "cphaprob -a if" command. |
|
PRJ-62301, PMTR-115027 |
ClusterXL |
In ClusterXL High Availability (HA), in some scenarios, the Active cluster member stops sending Cluster Control Protocol (CCP) heartbeats, and the Standby member may misinterpret this as an Interface Active Check (IAC) failure. |
|
PRJ-62686, PRHF-40994 |
ClusterXL |
Modifying the number of CoreXL instances in a VSLS cluster containing three or more members causes traffic interruption on the updated Virtual System. |
|
PRJ-60348, PMTR-113063 |
ClusterXL |
In cluster environments using Bonds and VLANs, the ClusterXL Monitoring command "cphaprob stat" (Expert Mode) and the Clish command "show cluster state" may display an incorrect failover reason when an interface disconnects or a link goes down. |
|
PRJ-61109, PMTR-115083 |
ClusterXL |
A rare race condition occurs during "cpstart" command execution in VSX environments that prevents proper sync interface installation, specifically in the cluster flow process, causing synchronization problems between cluster members. |
|
PRJ-59744, PRHF-38554 |
ClusterXL |
In a ClusterXL setup, a rare performance issue may be caused by policy installation failure. |
|
PRJ-61739, PMTR-115808 |
ClusterXL |
An FWK core file is generated when configuring a Bridge Group with more than two interfaces. |
|
PRJ-63078, PMTR-118396 |
SecureXL |
In some scenarios, the DOS/Rate Limiting configuration settings may default to incorrect values during an upgrade from R81.10 to R81.20. |
|
PRJ-63769, PRHF-41893 |
SecureXL |
When VLAN interfaces are created on top of bond interfaces configured for Load Sharing, connections may not be hardware accelerated if the bond uses multiple ports from the same physical NIC. Refer to sk184291. |
|
PRJ-60627, PMTR-114633 |
SecureXL |
Memory corruption may occur in rare VPN routing scenarios. |
|
PRJ-62200, PMTR-116890 |
SecureXL |
SecureXL does not immediately send packets to the appropriate handler when it receives packets from a Virtual Router or Virtual Switch and fails to forward them to the connected Virtual System. This delay causes significant routing delays and potential routing errors on VSX Security Gateways. |
|
PRJ-62263, PMTR-109269 |
SecureXL |
The USIM core file may be generated when rebooting the Security Gateway. |
|
PRJ-60896, PMTR-111305 |
SecureXL |
When SecureXL User Mode (UPPAK) is enabled, there can be a significant latency on a Security Gateway when opening an FTP data connection. |
|
PRJ-63077, PRJ-63054 |
SecureXL |
The link on the 4-Port 10/25GbE CX7 Lightspeed Network Interface Card may fail to establish when multiple 4-port CX7 Lightspeed Network Interface Cards are installed. |
|
PRJ-63120, PMTR-118447, FMW-6167 |
SecureXL |
Large packets cause performance slowdown. |
|
PRJ-55276, PMTR-104579 |
SecureXL |
Local TCP traffic may encounter "out-of-state" connection issues. |
|
PRJ-62887, PRHF-40086 |
SecureXL |
In cluster environments, on the Active member, the USIM_x86 process may experience frequent core dumps, causing Security Gateway instability. |
|
PRJ-62587, PRHF-41038 |
CoreXL |
In rare scenarios, CoreXL Firewall instances may become fully utilized because of resource contention from the Parallel Processing Engine (PPE). Refer to sk184183. |
|
PRJ-52995, PRHF-31534 |
Routing |
In a specific scenario, where SSM static groups are configured on an interface, after a failover, these IP addresses do not appear as Outgoing Interfaces (OIFs). |
|
PRJ-63117, PRHF-41346 |
Routing |
ASE LSAs for routes sharing the same prefix but having different mask lengths may not be re-originated correctly when a topology change restores previously unreachable routes to a reachable state. |
|
PRJ-61917, PRHF-40237, PMTR-116423 |
VPN |
In VSX environments with VS and VR configurations, when Policy-Based Routing (PBR) is configured on the Virtual Router, Remote Access VPN traffic bypasses the PBR table and uses the default route instead. |
|
PRJ-60692, PMTR-114063 |
VSX |
In rare scenarios in a VSX environment, after a Virtual System (VS) starts, it becomes stuck in Down state with a "FullSync" pnote. |
|
PRJ-62227, PMTR-110683 |
VSX |
The "vsx-provisioning-tool" CLI command returns asynchronous task IDs before it is ready for monitoring, causing Terraform and similar automation tools to immediately fail when attempting to track task status. |
|
PRJ-59687, PRHF-38276 |
Gaia OS |
HealthCheck Point (HCP) reports "rx_length_errors" for Security Group Members. Refer to sk183040. |
|
PRJ-62734, PMTR-117714 |
Gaia OS |
When using Resource Separation on MDPS on Maestro, and the Security Gateway is under extreme load, policy installation fails, although the Resource Separation should handle the load. |
|
PRJ-62584, PRHF-41027 |
Gaia OS |
The Security Management Server hangs during a Backup operation because of endless SSH handshake retry, making it impossible to access via SSH or CLI. |
|
PRJ-63583, PRHF-41381 |
Gaia OS |
SNMP query for "vsxStatusInterfaceRxBytes" and "vsxStatusInterfaceTxBytes" OIDs returns "0". Refer to sk183871. |
|
PRJ-62996, PRHF-41344 |
Gaia OS |
The "show syslog logs" Clish command returns the "cat: /var/log/messages*: No such file or directory" error even though these files exist. |
|
PRJ-62797, PRHF-41139 |
CloudGuard Network |
In the Smart-1 Cloud environment, in the Gateways & Servers view, newly provisioned CloudGuard Autoscaling Security Gateways may be shown as disconnected. |
|
PRJ-62819, PMTR-103009 |
SD-WAN |
In rare scenarios, SD-WAN policy installation may fail during a Security Gateway reboot. |
|
PRJ-62408, PMTR-117173 |
Scalable Platforms |
Security Group members may reboot because of cp-nano database entries. The /var/log/configuration_reboot_reason.log may show "process:cp-nano-watchdog" when database entries exist only on the local member or only on the SMO member. |
|
PRJ-58049, PRHF-37015 |
Scalable Platforms |
When handling multiple shared uplinks across numerous interfaces, errors related to LACP bond uplink updates may be printed in logs. |
|
PRJ-62175 |
Scalable Platforms |
A "failed to load external entity "/etc/extended_commands/lightshot_partition_extended_cli.xml" message may be printed in console during boot. |
|
PRJ-62803, PMTR-117683 |
Scalable Platforms |
In Maestro Security Group or Scalable Chassis Security Group with VSX with many Virtual Systems (VSs), boot may take a long time when the database file (/config/active) is very large (200,000 lines or more). |
|
PRJ-58374, PMTR-110163 |
Scalable Platforms |
In rare scenarios, Security Group members may fail to receive their Gaia database from the Single Management Object (SMO). When this occurs, gClish commands related to these missing Security Group configurations may fail. |
|
PRJ-47991, PMTR-91235 |
Scalable Platforms |
If L4 is disabled, the data connection may be dropped if it is redirected to a different IP address than the control connection. |
|
PRJ-59790, PMTR-105687 |
Scalable Platforms |
On the Mobile Access Portal, SAML authentication does not display the login fields in a Maestro Security Group in the VSX. Refer to sk182548. |
|
PRJ-48418, PRHF-23287 |
Scalable Platforms |
After adding a custom command in Gaia gClish with the "add command", the custom command is available only on the Single Management Object (SMO). Refer to sk178671. |
|
PRJ-59938, PRHF-38620 |
Carrier Security |
Security Gateway drops GTP traffic with the log "Message includes unexpected information element type". Refer to sk106469. |
Take 118
Released on 08 October 2025 and declared as Recommended on 15 October 2025
|
ID |
Product |
Description |
|---|---|---|
|
Take 118 - Improvements and Resolved Issues |
||
|
PRJ-63624, PMTR-119268 |
Logging |
UPDATE: Resolved CVE-2025-2028. Lack of TLS validation when downloading a visualization support data file. Refer to sk183349. |
|
PRJ-63916, PRHF-41964 |
Security Gateway |
Certain User Space processes (for example, PDPD) become unresponsive when working in Firewall Kernel Space Mode. Refer to sk184028. See Critical Information for R81.20 Jumbo Hotfix Accumulator. |
|
PRJ-63698, PRHF-38839 |
Scalable Platforms |
SNMP queries for ASG branch and the " See Critical Information for R81.20 Jumbo Hotfix Accumulator. |
|
PRJ-57216, PMTR-107934 |
Scalable Platforms |
Using a Multicast packet over a VPN tunnel may result in high SND CPU usage. See Critical Information for R81.20 Jumbo Hotfix Accumulator. |
Take 115
Released on 03 September 2025
|
ID |
Product |
Description |
|---|---|---|
|
Take 115 - New Functionality |
||
|
PRJ-60278, PMTR-114156 |
Application Control |
NEW: This Take introduces the Dynamic URL List feature is an enhancement to the Custom Applications / Sites object (sk165094), allowing to maintain a dynamic list of URLs based on a feed file. Refer to R81.20 Security Management Administration Guide > Topic "Creating Application Control and URL Filtering Rules". |
|
PRJ-60071, FMW-4386 |
Scalable Platforms |
NEW: Added support for SecureXL User Space (UPPAK) mode on Check Point Firewall 9400 appliances in the Maestro configuration. Refer to sk179432. |
|
Take 115 - Improvements and Resolved Issues |
||
|
PRJ-63339, PRHF-41560 |
HTTPS Inspection, VPN |
UPDATE: Updated CRL and OCSP validation in Remote Access VPN, Site-to-Site VPN, and HTTPS Inspection to use HTTP/1.1 instead of HTTP/1.0. This ensures continued compatibility with DigiCert's updated requirements and prevents certificate validation failures. Refer to sk183884. |
|
PRJ-63089, PMTR-116712 |
Security Management |
UPDATE: Added a new Gaia Clish command " |
|
PRJ-59692, MGMTPROD-1385 |
Security Management |
UPDATE: In SmartConsole and Management API, Access and NAT Policies now support Rule Base search for hitcount values. |
|
PRJ-61671, PMTR-89079 |
Security Management |
UPDATE: Improved the " |
|
PRJ-62307, PMTR-117039 |
Security Management |
UPDATE: Added the " |
|
PRJ-59692, MGMTPROD-1385 |
Security Management |
UPDATE: In SmartConsole and Management API, Access and NAT Policies now support Rule Base search for hitcount values. |
|
PRJ-59284, PRHF-38115 |
Security Management |
UPDATE: JRE is updated from version 8.0_8.26 to version 8.0_8.35. |
|
PRJ-61285, PRHF-39744 |
Security Management |
UPDATE: The upgrade duration for the Security Management Server and Multi-Domain Security Management Server has been reduced by up to 60%.
|
|
PRJ-60363, PMTR-114192 |
Security Management |
UPDATE: Updated the output of the Gaia Clish command " |
|
PRJ-62453, MGMTPROD-1952 |
Security Management |
UPDATE: Added new Management API commands to configure synchronization with User Center: " |
|
PRJ-62156, PMTR-116839 |
Logging |
UPDATE: Extended the " |
|
PRJ-61188, FMW-3427 |
URL Filtering |
UPDATE: URL Filtering now provides better categorization for non-inspected HTTPS connections by proactively re-validating certificates before the Categorize-HTTPS cache entry expires. |
|
PRJ-61815, PRHF-20323 |
VPN |
UPDATE: Modified the default behavior of the legacy Policy Server daemon (DTPSD). By default, this daemon now starts in the "DOWN" state unless explicitly configured otherwise. Refer to sk183803. |
|
PRJ-54573, PRHF-33808 |
Gaia OS |
UPDATE: In the Gaia Portal, improved the text of the warning displayed when removing permissions from a user in the Gaia Portal. |
|
PRJ-61641, PMTR-115412 |
Gaia OS |
UPDATE: In the Gaia Portal login, added support for the period character (".") in RADIUS and TACACS usernames. This feature is disabled by default. Refer to sk183201. See Critical Information for R81.20 Jumbo Hotfix Accumulator. |
|
PRJ-62422, VSECPC-10838 |
CloudGuard Network |
UPDATE: Added support for GCP NSI (Google Cloud Platform Network Security Integration) solution. |
|
PRJ-59471, PMTR-109854 |
Scalable Platforms |
UPDATE: Added option to use the local IP address 127.0.0.1 for license creation for Maestro Security Group members. |
|
PRJ-61787, PMTR-101696 |
Scalable Platforms |
UPDATE: CPView now monitors the Maestro backplane interfaces, Sync, and Chassis Internal Network (CIN) interfaces. |
|
PRJ-62939, ODU-2936 |
Automatic Updates - Web SmartConsole |
UPDATE: New features and improvements are released in Take 147 via self-updatable package. Refer to sk170314. |
|
PRJ-63159, ODU-2706 |
Automatic Updates - Log Exporter |
UPDATE: Added Take 44 to Log Exporter Auto Update Deployment. Refer to sk182866. |
|
PRJ-62738, ODU-2594 |
Automatic Updates - Threat Prevention |
UPDATE: Added Update 26 of Autonomous Threat Prevention Management integration Release. Refer to sk167109. |
|
PRJ-63264, ODU-2952 |
Automatic Updates - HCP |
UPDATE: Added Update 23 of HealthCheck Point (HCP) Release. Refer to sk171436. |
|
PRJ-62941, ODU-2928, PRJ-63334, ODU-3024 |
Automatic Updates - Policy Insights |
UPDATE: Added Take 72 and Take 74 of Policy Insights Release Updates. Refer to sk183421. |
|
PRJ-63337, ODU-2960 |
Automatic Updates - Scalable Platforms |
UPDATE: Added Take 18 of Scalable Platforms (Maestro and Chassis) Release Updates. Refer to sk183156. |
|
PRJ-60012, PMTR-114030 |
Security Management |
In rare scenarios, policy installation may get stuck at 99%. |
|
PRJ-61586, PRHF-37905 |
Security Management |
Access Control policy installation may take a long time when updatable objects are used in the policy. |
|
PRJ-61289, PRHF-39256 |
Security Management |
In rare scenarios, login to the Security Management Server may fail with a timeout. |
|
PRJ-61292, PRHF-39777 |
Security Management |
The $MDS_FWDIR/log/ directory may contain multiple api_status_UUID.json files. |
|
PRJ-62022, PRHF-40184 |
Security Management |
In SmartConsole, deleting a license in the Licenses tab of a Security Cluster object fails with the "Domain Management Server licenses cannot be removed from the Domain Management Server level" error. |
|
PRJ-59090, PRHF-37685 |
Security Management |
Administrators with LSM write permissions cannot delete LSM Gateway objects without also having write permissions for Others/Common Objects. |
|
PRJ-57082, PRHF-36096 |
Security Management |
In some scenarios, the PostgreSQL database fully utilizes disk space on the Security Management Server. |
|
PRJ-59084, PRHF-37999 |
Security Management |
Policy installation is delayed because of the FWM process load. Refer to sk183563. |
|
PRJ-59927, PRHF-38237 |
Security Management |
In some scenarios, the Changes Report is not attached to the email sent by the SmartTask configured with the "After Publish" trigger and the "Send Mail" action. |
|
PRJ-61321, PRHF-39817 |
Security Management |
Reassigning Global Policy takes a few hours after updating IPS Snort protections. |
|
PRJ-63371, PRHF-41564 |
Security Management |
Backup file size on the Security Management Server grows after an upgrade. Refer to sk183835. See Critical Information for R81.20 Jumbo Hotfix Accumulator |
|
PRJ-62183, PMTR-116869 |
Security Management |
SAML authentication fails for Web SmartConsole on port 4434, redirecting to an invalid URL (https://localhost:4434:4434/smartconsole/transport) and preventing SSO login, while SmartConsole GUI authentication works normally. |
|
PRJ-61668, PRHF-39885 |
Security Management |
In some scenarios, SmartConsole disconnects when installing policy if there are 50 installation targets or more. |
|
PRJ-59665, PRHF-37860 |
Security Management |
Compliance scan finishes successfully but does not show any data in SmartConsole. |
|
PRJ-62232, MGMTPROD-436 |
Security Management |
The Management API command " |
|
PRJ-57313, PRHF-36228 |
Security Management |
In some scenarios, the Management API command " |
|
PRJ-62092, PRHF-40268 |
Security Management |
In SmartConsole, when viewing the License tab of a Security Gateway object, multiple duplicated VSEC licenses with the same signature may be shown. |
|
PRJ-60677, PMTR-114726 |
Security Management |
The Management API commands " |
|
PRJ-61532, PRHF-39869 |
Security Management |
In the Compliance view, when clicking the picker in the "Source" or "Destination" columns while creating a custom Firewall Best Practice, the network objects list shows "Loading" and loads slowly. |
|
PRJ-60213, PRHF-38893 |
Multi-Domain Security Management |
In rare cases, Security Gateway licenses are not displayed in SmartUpdate when connected at the Multi-Domain Security Management level, despite being visible at the Domain level. |
|
PRJ-62128, PRHF-26970 |
Multi-Domain Security Management |
Running the " |
|
PRJ-61929, PMTR-105087 |
Logging |
In some scenarios, exporting logs to a CSV file at the Multi-Domain Security Management level generates an incomplete file with empty lines, and a log_indexer core dump may be found on the Server. |
|
PRJ-59193, PRHF-38042 |
Logging |
When viewing certain reports in SmartView, the "No data found" error may appear even when matching logs exist. |
|
PRJ-58761, PRHF-37638 |
Security Gateway |
Incorrect bonds may be shown in the Data Plane when using MDPS and running the Gaia Clish command " |
|
PRJ-60753, PRHF-39368 |
Security Gateway |
Non-HTTP connections may be incorrectly dropped because of a missing Host header when the Gateway operates as a proxy. |
|
PRJ-61908, PMTR-116366 |
Security Gateway |
Missing cleanup when template connection creation fails prevents the system from exiting new connection context mode, causing subsequent connection operations to write incorrectly to the cache instead of the connection table. |
|
PRJ-60899, PRHF-39414 |
Security Gateway |
Traffic is dropped with a"Matched Optimized Drop" message, although it is allowed by configurations in the Rule Base. Refer to sk183443. |
|
PRJ-61059, FMW-4633 |
Security Gateway |
VSEC licenses may be automatically deleted and re-added on the Security Management Server (SmartCenter in Azure), creating duplicate license strings with mismatched signatures and causing intermittent "License with CK already exists" errors. |
|
PRJ-61864, PRHF-40249 |
Security Gateway |
In rare scenarios, the WSDNS daemon may exit instead of shutting down gracefully. |
|
PRJ-57281, PRHF-36273 |
Security Gateway |
The $CPDIR/bin/update_license_conf script incorrectly parses the allowed cores count, setting " |
|
PRJ-62106, PRHF-40509 |
Security Gateway |
The Clone Policy Package task in SmartConsole fails with the "The object name must not contain whitespace characters at the beginning or the end" error. Refer to sk161294. |
|
PRJ-60756, PMTR-114362 |
Security Gateway |
In rare scenarios, the local connection route may be incorrect when the ICAP client is active. |
|
PRJ-55960, PMTR-105446 |
Security Gateway |
Maestro Security Group Member status frequently changes to "Down". The $FWDIR/log/fwk.elg file contains the error " |
|
PRJ-59649, PMTR-116831 |
Security Gateway |
In rare scenarios, the FWK process may unexpectedly exit when stopping the Security Gateway with the " |
|
PRJ-51593, PRHF-31491 |
Security Gateway |
Unexpected cluster flapping may occur during signature load. |
|
PRJ-62120, PRHF-40597 |
Security Gateway |
The SAML authentication flow may fail on a VSX Gateway. |
|
PRJ-61362 |
Security Gateway |
The Security Gateway may not be stable, and the error is printed in logs "Error: Timeout waiting for response from database server. BUG: soft lock - CPU#XX stuck for XXs". Refer to sk184554. |
|
PRJ-62372, PMTR-117120 |
Security Gateway |
The Security Gateway may crash when checking if a local outbound packet's interface is excluded from outbound traffic processing while SecureXL User Mode (UPPAK) is enabled. |
|
PRJ-61011, PRHF-39339 |
Security Gateway |
After upgrading the Security Gateway to R81.20 Jumbo Hotfix Accumulator Take 92, Remote Access IPSec VPN connections using Endpoint Security VPN E88.60 fail. Authentication succeeds, but all client connections through the Security Gateway are dropped by the Cleanup Rule. |
|
PRJ-61488, PRHF-39983 |
Security Gateway |
In a rare scenario, the FWK process may restart unexpectedly. |
|
PRJ-61052, PRHF-39655 |
Security Gateway |
After a system restarts (for example, reboot or cprestart), FWD-related sub-processes such as VPND and PDP may not run. Refer to sk183446. |
|
PRJ-47010, PRHF-28783 |
Content Awareness |
Disk space may not be cleared as expected when Content Awareness is the only enabled Software Blade. |
|
PRJ-62791, PMTR-115931 |
URL Filtering |
The FW_FULL process may exit in the Dynamic URLs list update flow. |
|
PRJ-62256, PMTR-116639 |
URL Filtering |
In rare scenarios, the FWK process may crash when the URL Filtering Software Blade is enabled. |
|
PRJ-62442, PRHF-40727 |
IPS |
Security Gateway blocks the download of files larger than 4 GB with the log "Application Control - HTTP parsing error occurred" in SmartConsole. Refer to sk183681. |
|
PRJ-60270, PMTR-113602 |
DLP |
A potential memory leak because of many DLP/FILE_CONVERT processes spawned. |
|
PRJ-57444, PRHF-36348 |
ClusterXL |
Virtual System in a VSX VSLS Cluster does not fail over when a cluster interface goes down. Refer to sk182734. |
|
PRJ-62144, PMTR-116446 |
SecureXL |
After an upgrade, the USIM process may exit. |
|
PRJ-63033, PRHF-41230 |
SecureXL |
When there are a large number of SNDs operating with Intel NICs, the system may run low on available jumbo mbufs, leading to connectivity issues. Refer to sk183771. See Critical Information for R81.20 Jumbo Hotfix Accumulator. |
|
PRJ-62690, PMTR-117113 |
SecureXL |
When the Security Gateway runs in User Mode SecureXL (UPPAK), removing a VLAN impacts connectivity on other VLANs in Bridge mode that share the same physical interface. |
|
PRJ-59179, PRHF-37771 |
Routing |
The multicast stream may not resolve correctly in VSX topologies. Packets are dropped with the "IP multicast routing failed (missing OS route)" message. |
|
PRJ-59304, PMTR-111436 |
VPN |
IKE related core files may be generated when passing traffic through a VPN tunnel. |
|
PRJ-60074, AAD-5014 |
VPN |
Rare VPN connectivity issues caused by Encryption Domain overrides in communities with third-party Gateways. |
|
PRJ-61968, PRHF-40481 |
VPN |
The VPND or IKED daemon may exit during IKEv2 negotiation. |
|
PRJ-59921, PRHF-38669 |
Gaia OS |
In rare scenarios, users may be disconnected from SmartConsole, and an FWM process core dump is generated. |
|
PRJ-61755, PMTR-115846 |
Gaia OS |
Traffic routing may fail between the host and PPPoE / DNS Server through the Security Gateway, even though host-to-gateway and gateway-to-DNS connections work as expected. |
|
PRJ-61813, PRHF-40409 |
Gaia OS |
SNMP Agent may report a wrong value for VLAN Interface Speed. |
|
PRJ-59656, PRHF-38449 |
Gaia OS |
The 1.3.6.1.4.1.2620.1.6.7.5.1.5 SNMP OID (multiProcUsage) reports wrong values when HyperFlow is enabled. |
|
PRJ-61193, PRJ-61194 |
Gaia OS |
The output of " |
|
PRJ-62383, PRHF-40893 |
Gaia OS |
SNMP data types in the " |
|
PRJ-62115, PRHF-40601 |
Gaia OS |
Backup retention policy on Maestro may be performed only on SMO and skip a Security Group member. |
|
PRJ-58020, PRHF-36770 |
Gaia OS |
Backup may fail when using some special characters in the Remote Security Manager Server password. |
|
PRJ-61592, PRHF-40115 |
Gaia OS |
|
|
PRJ-62221, PRHF-40517 |
CloudGuard Network |
If the User Center connection fails, contracts may be retrieved incorrectly, resulting in erroneous contracts getting pushed to the Security Gateway. |
|
PRJ-61979, PRHF-40203 |
CloudGuard Network |
Changes made to the JSON file of a Generic Data Center object may take a long time to appear in SmartConsole or the Management API, although enforcement on the Security Gateway functions as expected. |
|
PRJ-59779, PMTR-111817 |
Scalable Platforms |
Policy installation may fail on newly added Security Group members because an updatable object package is missing. |
|
PRJ-60102, PRHF-38839 |
Scalable Platforms |
The " |
|
PRJ-61344, PRHF-39863 |
Scalable Platforms |
The " |
|
PRJ-62537, PMTR-117435 |
Scalable Platforms |
The CPVIEWD daemon may exit on a VSX Gateway. |
|
PRJ-62573, PMTR-117483 |
Scalable Platforms |
Security Group members changing from ACTIVE state to READY state may cause traffic impact. |
|
PRJ-59055, PRHF-37439 |
Carrier Security |
The Security Gateway may crash after dropping corrupt GTP-C (control traffic) packets. |
Take 113
Released on 28 August 2025 and declared as Recommended on 07 September 2025
|
ID |
Product |
Description |
|---|---|---|
|
Take 113 - Improvements and Resolved Issues |
||
|
PRJ-63355, PMTR-118855, PRHF-41592, PRHF-41631 |
Security Gateway |
In some scenarios, when "Packet Capture" is enabled as a "Track" option in the Threat Prevention policy, the Security Gateway may become unresponsive or crash. See Critical Information for R81.20 Jumbo Hotfix Accumulator |
|
PRJ-63298, PRHF-41389 |
CloudGuard Network |
The CloudGuard Network Central License utility fails to distribute the license, if there are duplicate entries of the license on the Security Management Server. Refer to sk183832. See Critical Information for R81.20 Jumbo Hotfix Accumulator |
Take 111
Released on 04 August 2025
|
ID |
Product |
Description |
|---|---|---|
|
Take 111 - New Functionality |
||
|
PRJ-59919, PRJ-60198 |
Gaia OS |
NEW: Added the option to send Gaia backup to a Remote Server using the SFTP protocol. This feature also supports restore operations via SFTP and scheduled backups (including retention policy support).
|
|
Take 111 - Improvements and Resolved Issues |
||
|
PRJ-60717, PMTR-114504 |
Logging |
UPDATE: Resolved CVE-2025-2028. Lack of TLS validation when downloading a visualization support data file. Refer to sk183349. |
|
PRJ-59467, PMTR-112077 |
Mobile Access |
UPDATE: Resolved CVE-2024-52885. Mobile Access File Share applications are vulnerable to directory traversal attacks. Refer to sk183137. |
|
PRJ-60771, HEC-868, PMTR-114867 |
Diagnostics |
UPDATE: Added the ability to monitor the CPU cores that run CoreXL SND (Secure Network Dispatcher) instances separately from the CPU cores that run CoreXL Firewall instances. The monitoring of CPU cores handling CoreXL SND instances was improved. It is possible now to:
When these parameters are configured, the load on SND CPUs triggers a failover at a different time and under different load conditions compared to Firewall CPUs. Refer to the R81.20 ClusterXL Administration Guide > Advanced Features and Procedures > ClusterXL Failover based on the Load on ClusterXL SND Instances. |
|
PRJ-61387, PRHF-39859 |
Security Management |
UPDATE: On Security Management Servers, environment variables set using the override_server_setting.sh script now apply to all processes. Refer to sk165938. |
|
PRJ-60791, PRJ-60790 |
Logging |
UPDATE: In SmartConsole > Logs & Monitor > Logs, added information to the "Per Session" logs:
|
|
PRJ-60244, PMTR-110297 |
Logging |
UPDATE: Log Exporter is now delivered as an autoupdatable package, replacing the maintrain-based deployment. This approach shifts from version-based to component-level updates, enabling a more granular and agile update mechanism. Refer to sk182866. |
|
PRJ-59880, PRHF-38023 |
Security Gateway |
UPDATE: Improved processing of ICMP packets in the Security Gateway. |
|
PRJ-61486 |
Security Gateway |
UPDATE: Check Point Firewall 9400 and 9300 appliances with Standalone configuration now run in User Space Firewall (USFW) Mode by default. |
|
PRJ-60046, PMTR-110330 |
Security Gateway |
UPDATE: Added an out-of-the-box package for updatable objects that is included with clean installations or Jumbo Accumulator Hotfix Takes (when no other package exists). If the out-of-the-box package is present during policy installation, an update is now initiated in addition to the automatic update. |
|
PRJ-61794, PRHF-40060 |
Scalable Platforms |
UPDATE: The " |
|
PRJ-61405, PMTR-112536 |
Scalable Platforms |
UPDATE: Increased the maximum supported number of Uplink interfaces from 64 to 99 on Maestro Orchestrator MHO-175. It is now supported to configure Ports 17 - 30 as Uplink. Refer to the Maestro Getting Started Guide. |
|
PRJ-60584, PMTR-116355 |
VPN |
UPDATE: Added the "inclusions" feature to the Split Tunnel Remote Access functionality. Refer to the R81.20 Remote Access VPN Admin Guide > Dynamic Split Tunneling for SaaS Using Updatable Objects. |
|
PRJ-61572, ODU-2674, PRJ-62644, ODU-2856 |
Automatic Updates - CPView |
UPDATE: Added Take 179 and Take 192 of CPotelcol (OpenTelemetry Collector) Release Updates. Refer to sk180522. |
|
PRJ-61566, ODU-2690 |
Automatic Updates - CPView |
UPDATE: Added Take 47 of CPquid (QUID) Release Updates. Refer to sk181458. |
|
PRJ-61563, ODU-2682, PRJ-62647, ODU-2848 |
Automatic Updates - CPView |
UPDATE: Added Take 44 and Take 75 of CPViewExporter Release Updates. Refer to sk180521. |
|
PRJ-61758, ODU-2722, PRJ-62172, ODU-2754 |
Automatic Updates - Web SmartConsole |
UPDATE: New features and improvements are released in Take 140, Take 142, Take 143 via self-updatable package. Refer to sk170314. |
|
PRJ-60351, PMTR-114300 |
Diagnostics |
An FD (file descriptor) memory leak may occur when creating a new object in SmartConsole. |
|
PRJ-60518, PMTR-114274 |
Security Management |
VPN certificate renewal may generate certificates with 2K key sizes instead of the 3K size specified in Global Properties. |
|
PRJ-61042, PRHF-39465 |
Security Management |
In rare scenarios, accelerated policy installation fails to initialize, the full Access Control Policy installation is executed instead and it may take up to 20 minutes. |
|
PRJ-61516 |
Security Management |
The "Mellanox firmware update *** FAILED ***" error is displayed during reboot when upgrading a Check Point Firewall Appliance to R81.20 Jumbo Hotfix Accumulator Take 99. Refer to sk183468. |
|
PRJ-58351, PRHF-37197 |
Security Management |
In some scenarios, policy installation fails with the "/opt/<xxxxx>-R81.20/conf/Policy-name.pf" line N: ERROR: syntax error Error compiling IPv6 flavor. Operation ended with errors" error. |
|
PRJ-60960, PRHF-38808 |
Security Management |
In rare scenarios, in multi-site Multi-Domain Security Management environments, operations across two or more Servers, such as Global Domain Assignment, IPS and Application Control update may fail. |
|
PRJ-57974, PRHF-36695 |
Security Management |
In some scenarios, the Postgres database on the Standby Security Management Server is growing after every High Availability synchronization. Refer to sk182868. |
|
PRJ-60698, PRHF-39297 |
Security Management |
The Management API command " |
|
PRJ-56521, PRHF-35230 |
Security Management |
In rare scenarios, the first packet of a connection is incorrectly dropped when a non-FQDN object is used in the Rule Base. |
|
PRJ-60469, PRHF-38859 |
Security Management |
Deleting a user that is used in a user group with more than 1000 users may cause SmartConsole to time out. |
|
PRJ-55626, PRHF-34401 |
Security Management |
The Management API command " |
|
PRJ-60761, PRHF-39098 |
Security Management |
In rare scenarios, after deleting Data Center objects:
|
|
PRJ-60150, PRHF-38525 |
Security Management |
In some scenarios, Virtual Security Gateways lose their licenses. This causes Site to Site VPN and Remote Access VPN services to go down, while general internet access remains functional. SmartUpdate may not load. |
|
PRJ-60432, PRHF-38563 |
Security Management |
Virtual System routes and interfaces may not be synchronized to the Standby Security Management Servers. |
|
PRJ-54442, PRHF-33411 |
Security Management |
In some scenarios, when exporting the Gateways and Servers View to CSV, the resulting file may contain an extra empty column. Refer to sk182233. |
|
PRJ-61476, PRHF-40016 |
Security Management |
In rare scenarios, the CPRLIC process may exit with core files generated to the /var/log/dump/usermode/ directory on the Security Management Server. |
|
PRJ-60339, PRHF-38803 |
Security Management |
In some scenarios, SmartTasks triggered by "after submit", "approve" and "reject" events fail to run. |
|
PRJ-61358, PRHF-39806 |
Security Management |
In some scenarios, a cluster object may not be listed in the "Uninstall Threat Prevention Policy" window. |
|
PRJ-61317, PRHF-39827 |
Security Management |
Fetching branches from an LDAP Server fails with "Failed to connect to LDAP Server. Please ensure that the administrator's credentials are correct and try again" when the LDAP Server does not support anonymous bind (when a client connects to an LDAP server without providing any credentials). To enable the ability, refer to sk183461. |
|
PRJ-59624, PRHF-38414 |
Multi-Domain Security Management |
In rare scenarios, Domain creation fails with "Failed to create Domain server '<Domain Server Name>'. The connected administrator has no permission to create a Domain-Server on the specified Domain". |
|
PRJ-60573, PMTR-106428 |
Logging |
When disconnecting the Security Management Server from the Check Point Portal and connecting to a different region, log sharing from Log Servers does not work until the Log Server restarts. |
|
PRJ-61394 |
Logging |
The " |
|
PRJ-59894, PRHF-38438 |
Security Gateway |
The VSX Security Gateway may crash when an external interface connected to the Virtual Router or Virtual Switch starts flapping. |
|
PRJ-60538, PRHF-38647 |
Security Gateway |
In a rare scenario, after an upgrade, the Security Gateway may crash with a vmcore. |
|
PRJ-61451, PRHF-39847, PRJ-61448, PRHF-39840 |
Security Gateway |
|
|
PRJ-60535, PRHF-38638 |
Security Gateway |
In some scenarios, in a cluster environment, when URL Filtering is enabled, there may be traffic disruption. |
|
PRJ-60445, PRHF-38975 |
Security Gateway |
RADIUS authentication fails when a response packet contains the Message-Authenticator attribute. Refer to sk183244. |
|
PRJ-59785, PRHF-38340 |
Security Gateway |
The FWK process may unexpectedly restart when running the memory detection leak procedure. |
|
PRJ-59545, PRHF-38154 |
Security Gateway |
In some scenarios, the "Use of undefined constant session" warning is frequently printed in the SAML Portal's error_log file. |
|
PRJ-57084, PRHF-35275 |
Security Gateway |
Intermittent DNS resolution failures on a specific Virtual System (VS) on the Maestro VSX Gateway. |
|
PRJ-60426, PMTR-114342 |
Security Gateway |
In rare scenarios, the FWK process may unexpectedly exit when the IPS Software Blade logs triggered protections. |
|
PRJ-58558, PRHF-37480 |
Security Gateway |
When running an HCP test, redundant errors "Global param: operation failed", "Unknown parameter (param name fw_je_leak_detection_set)/(param name cp_shmem_leak_detect)" may be printed in the /var/log/messages file. This is a cosmetic issue. |
|
PRJ-60547, PRHF-38708 |
Security Gateway |
Incorrect memory handling may cause the FWK process to unexpectedly exit. |
|
PRJ-60128, PRHF-38666 |
Security Gateway |
Memory allocation issue may occur, when the Mirror and Decrypt feature is enabled. |
|
PRJ-60125, PRHF-38574 |
Security Gateway |
When Mirror and Decrypt features are enabled, the Security Gateway may experience unexpected reboots. |
|
PRJ-60948, PRHF-39471 |
Security Gateway |
In a rare scenario, the CPD daemon may exit on the Security Gateway. |
|
PRJ-60578, PRHF-38995 |
Security Gateway |
In rare cases, failovers may occur because the FWK process unexpectedly exits. |
|
PRJ-59156, PRHF-37774 |
Security Gateway |
Security Gateways with default MDPS task settings using proxy can fetch CPUSE updates and licenses successfully. On MPLANE updatable objects are not updated while everything works on DPLANE. |
|
PRJ-61076, PRHF-39496 |
Security Gateway |
HTTPS traffic fails with "connection reset" errors on Security Gateways that have HyperFlow IoC feeds configured. Refer to sk183373. |
|
PRJ-56414, PRHF-35304 |
Threat Prevention |
In rare scenarios, the Packet Capture field is missing from Threat Prevention logs in SmartConsole. Refer to sk182597. |
|
PRJ-59567, PRHF-34528 |
Threat Prevention |
In some scenarios, external IoC feeds are not correctly fetched in VSX environments after a reboot. |
|
PRJ-57977, PRHF-36739 |
Threat Extraction |
In a rare scenario, a script related to CPView may take a long time to execute and the SCRUBD process becomes unresponsive. |
|
PRJ-60242, PRHF-38820 |
Identity Awareness |
PDP to PEP Identity synchronization may fail on the PDP side if an alternative IP address for PEP communication is configured, as described in sk60701. |
|
PRJ-56047, PRHF-35030 |
Identity Awareness |
Identity Broker Subscriber configured with local Access Role recalculation incorrectly deletes external groups during new Identity publishing, causing missing access roles and improper enforcement for CISCO ISE identity sessions. |
|
PRJ-60939, PRHF-38863 |
IPS |
The FWK process may unexpectedly exit during HTTPS inspection flow which requires the RAD service categorization. |
|
PRJ-60821, PMTR-114946 |
Anti-Virus |
False threat alerts may appear in Anti-Virus logs for benign traffic (action: accept). This is a cosmetic issue with no security impact. |
|
PRJ-58004, PRHF-36322 |
Anti-Virus |
In rare scenarios, Security Gateways with Content Awareness Software Blade enabled may fail to properly process certain .zip file formats, resulting in "Failed to process files" errors during Anti-Virus inspection. |
|
PRJ-59856, PRHF-38565 |
Anti-Virus |
In some failure scenarios, the Anti-Virus Software Blade does not report the failure in a SmartConsole log. |
|
PRJ-60662, PMTR-114734 |
Anti-Bot |
In rare scenarios, the RAD process may unexpectedly exit. |
|
PRJ-60615, PRHF-39184 |
Mobile Access |
The Mobile Access Portal hosted on a Security Gateway R81.20 or lower becomes unresponsive, and CVPND core files are generated after the Security Management Server is upgraded to version R82. |
|
PRJ-59765, PRHF-38539 |
ClusterXL |
If both bond subordinate interfaces are down, the output of " |
|
PRJ-57368, PRHF-36165 |
ClusterXL |
In VSX environments, deleting a Virtual System interface through SmartConsole fails to remove certain bindings, causing the interface to be automatically re-added. |
|
PRJ-60779, PMTR-110618 |
ClusterXL |
The ROUTED daemon may incorrectly initialize as Subordinate rather than Master after a " |
|
PRJ-60958, PMTR-107209 |
ClusterXL |
Cluster member state queries return non-unique or irrelevant state codes, making it impossible to distinguish between different cluster member states. |
|
PRJ-51585, PMTR-98639 |
ClusterXL |
ClusterXL Standby member stays down with a message "Reason for state change: FULLSYNC PNOTE - Connection terminated by remote member". Refer to sk182660. |
|
PRJ-58335, PRHF-36801 |
ClusterXL |
A Multi-Version Cluster (MVC) member with VPN enabled may crash when performing an upgrade from R80.40. |
|
PRJ-60532, PRHF-38566, PRJ-60544, PRHF-38704 |
ClusterXL |
In ClusterXL High Availability setup, a crash may occur on both the primary and secondary members, causing network outages. |
|
PRJ-59212, HEC-1195 |
ClusterXL |
In High Availability Bridge Mode ClusterXL environments, the management interface of a Standby member becomes inaccessible. Refer to sk183124. |
|
PRJ-59502, PRHF-38095 |
ClusterXL |
In rare scenarios, after enabling Bridge Mode, a cluster member may stuck in a boot loop. |
|
PRJ-60292, PRHF-38847 |
ClusterXL |
A race condition may occur during startup when the ROUTED daemon does not receive all cluster Virtual IP addresses, causing static routes to disappear. |
|
PRJ-61466, PMTR-111760 |
SecureXL |
The USIM process to exit during error logging. |
|
PRJ-60591, PMTR-113834 |
SecureXL |
In a rare scenario, no traffic is passed in the 6in4 tunnel and the two hosts cannot reach each other. The output for the " |
|
PRJ-62357, PRHF-40869 |
SecureXL |
Maestro Gateways running Kernel Space Mode SecureXL (KPPACK) may automatically switch to User Space Mode SecureXL (UPPAK) during Jumbo Hotfix Accumulator installation if the platform supports UPPAK. See Critical Information for R81.20 Jumbo Hotfix Accumulator. |
|
PRJ-61883 |
SecureXL |
Installing R81.20 Jumbo Hotfix Accumulator Take 96 and higher on Maestro Gateways with SecureXL working in User Mode (UPPAK) may cause an outage. See Critical Information for R81.20 Jumbo Hotfix Accumulator. |
|
PRJ-60377, PMTR-114234 |
SecureXL |
When printing the Deny list on a Security Gateway during Threat Prevention policy installation after deleting a large IoC feed from Security Management, an uninformative IOCTL error is displayed instead of a proper error message. The issue is cosmetic only. |
|
PRJ-61020, PMTR-115089 |
SecureXL |
In rare scenarios, when SecureXL works in User Mode, running the " |
|
PRJ-61107, PMTR-108077 |
SecureXL |
SecureXL in User Mode (UPPAK) may be incorrectly enabled or disabled during runtime or Jumbo Hotfix Accumulator installation. SecureXL in User Mode (UPPAK) can be enabled with PPPoE enabled although this configuration combination is not supported. |
|
PRJ-61216, PRHF-39512 |
SecureXL |
The Security Gateway with SecureXL in UPPAK mode may crash under load during bond interface state flapping. |
|
PRJ-60069, PMTR-111505 |
SecureXL |
Running the " |
|
PRJ-61180, PRHF-39695 |
SecureXL |
Multicast traffic is dropped when the Packet-Broker operates in Monitor Mode with Promiscuous Mode disabled. |
|
PRJ-61915, PMTR-116506 |
SecureXL |
The USIM process may crash during route updates when the Hardware Acceleration offloading connection is active. |
|
PRJ-60720, PMTR-114790 |
SecureXL |
The Security Gateway may crash when connected to the Smart-1 Cloud Management Server and a maas_tunnel interface is repeatedly added and deleted. |
|
PRJ-60999, PMTR-115074 |
SecureXL |
After MTU for Jumbo Frames is configured on a physical interface for the first time, until the Security Gateway is rebooted, there may be potential packet drops. |
|
PRJ-60161, PRHF-38736 |
Routing |
The ROUTED daemon core dump file may be generated because of an assertion failure in the OSPF code. |
|
PRJ-58774, PRHF-37444 |
Routing |
The ROUTED daemon may exit when processing OSPF network updates in a cluster environment. This occurs because of a timing issue in the routing protocol synchronization process. |
|
PRJ-61330, PMTR-115613 |
Routing |
When working in User Mode (UPPAK), SecureXL may crash when multiple SND cores perform simultaneous next hop lookup for the same next hop. |
|
PRJ-60775, PMTR-114870 |
Routing |
In some scenarios, the ROUTED daemon may exit with a core dump file. |
|
PRJ-62595, PMTR-117551 |
Routing |
DHCP broadcast packets are not visible on the intended VLAN when working in SecureXL User Mode (UPPAK). Refer to sk183675. See Critical Information for R81.20 Jumbo Hotfix Accumulator. |
|
PRJ-60834, PMTR-114670 |
Routing |
When obtaining a new IP address using the " |
|
PRJ-61213, PMTR-115308 |
Routing |
If BFD (Bidirectional Forwarding Detection) timing parameters, such as "min-rx-interval", are modified during an active BFD session deletion process, and a new BFD session is established before the deletion fully completes (deletion typically requires up to 2 hours), the newly created session inherits the previous timing configuration rather than applying the updated timing settings. |
|
PRJ-60744, PMTR-114835 |
Routing |
In some scenarios, BGP routing updates may not be processed properly. |
|
PRJ-61419, PMTR-114871 |
Routing |
In a rare scenario, a Security Gateway crash and temporary loss of routing adjacency occur when the cluster messaging system attempts to process a deletion request for a BFD session that no longer exists. |
|
PRJ-62110, PRHF-40540 |
Routing |
A memory leak occurs in the ROUTED daemon when CoreXL is running OSPF and handling large numbers of LSAs combined with frequent route flaps. |
|
PRJ-61224, PRHF-39785 |
VPN |
In a rare scenario, the FWK process may exit during VPN traffic decryption and routing when the PPPoE interface is enabled. |
|
PRJ-57349, PRHF-36278 |
VSX |
A static route to 0.0.0.0, regardless of the subnet mask, is incorrectly treated as the default route (0.0.0.0/0) and does not appear in the VSX Gateway's routing table. Refer to sk182742. |
|
PRJ-53236, PMTR-97794 |
VSX |
Policy installation fails after converting VSX ClusterXL from High Availability to Load Sharing Mode using the " |
|
PRJ-48007, PRHF-29605 |
VSX |
In a VSX High Availability Cluster, ns_relay core dumps may be generated and multiple TCP errors are printed in /var/log/opt/CPshrd-R81.20/CTX/CTX<ID>/ns_relay.elg logs, such as: "<TCP ERROR> receive_buffer: recv returned -1", "<TCP ERROR> tcp_srv_connect_aux: connect failed". |
|
PRJ-58319, PRHF-37066 |
VSX |
Virtual Router advanced routes may be assigned incorrect priorities in policy-based routing configurations. |
|
PRJ-58333, PRHF-37228 |
VSX |
The " |
|
PRJ-58790, PRHF-37719 |
VSX |
The " |
|
PRJ-62064, PRHF-40577 |
Gaia OS |
Stability issue on Check Point Firewall appliances 9300 and 9400. Refer to sk183438. |
|
PRJ-59136, PMTR-110490 |
Gaia OS |
When deleting a bond interface with slaves still attached while maintaining both Gaia Portal and SSH sessions, the deletion succeeds but generates "unregister_netdevice" syslog messages and terminates the Gaia Portal session. The issue occurs because local connections to the Gateway cause slow bond interface deletion, leading to Gaia Portal timeout. |
|
PRJ-61661, ODU-2714 |
Gaia OS |
The Redis Server does not start after installing the Gaia API Build 299. Refer to sk143612. |
|
PRJ-57174, PRHF-36109 |
Gaia OS |
In rare scenarios, when using IP Aliasing, deleting an interface by IP address reference may incorrectly delete the wrong IP address because of incorrect error handling. |
|
PRJ-59987, PRHF-38501 |
Gaia OS |
Multiple SNMP OIDs return incorrect data types. Refer to sk183166. |
|
PRJ-58039, PRHF-36803 |
Gaia OS |
SNMP OID .1.3.6.1.4.1.2620.1.6.7.5.1.5.X falsely reports high CPU because of incorrect calculation. Refer to sk182784. |
|
PRJ-58412, PRHF-37416 |
Gaia OS |
Exporting logs using the " |
|
PRJ-50472, PRHF-30581 |
Gaia OS |
In rare scenarios, a Security Gateway may unexpectedly restart when deleting interfaces of an 802.3ad bond interface. |
|
PRJ-62607, PRHF-41064 |
CloudGuard Network |
After an upgrade to R81.20 Jumbo Hotfix Accumulator Take 99, AWS CloudGuard Gateway may crash with a vmcore. Collecting the CPInfo statistics also triggers a crash with a reboot. |
|
PRJ-60962, PMTR-115016 |
SD-WAN |
SD-WAN fails to obtain next hop address automatically from the DHCP Server. |
|
PRJ-59426, PRHF-38271 |
SD-WAN |
SD-WAN policy installation may fail during the configuration of MDPS on the Security Gateway. |
|
PRJ-60747, PMTR-114442 |
SD-WAN |
In rare scenarios, SD-WAN policy installation hangs indefinitely. |
|
PRJ-60260, PMTR-101578 |
SD-WAN |
Policy installation may fail after an upgrade of the Security Gateway with enabled SD-WAN. |
|
PRJ-61503, PRHF-39967 |
Scalable Platforms |
A cluster member may crash when performing a manual site failover and the deployment is using "Interface Active Check" with IPv6 enabled. |
|
PRJ-60449, HEC-914 |
Scalable Platforms |
After a reboot, IPv6 addresses configured on data interfaces disappear from the " |
|
PRJ-56585, PRHF-35421 |
Scalable Platforms |
Connections with fragmented packets drop with the "Virt Defrag Timeout" error. Refer to sk182559. |
|
PRJ-60475, PMTR-110389 |
Scalable Platforms |
The " |
|
PRJ-59876, PMTR-113194 |
Scalable Platforms |
A reboot loop with a generated configuration pnote may be triggered when Security Group hostname contains strings with " |
|
PRJ-60674, PRHF-38834 |
Scalable Platforms |
Running " |
|
PRJ-44777, PMTR-90651 |
Scalable Platforms |
Incorrect entry order in the /etc/passwd file (admin user entry appearing after root user entry) causes adding Security Group Member with the " |
|
PRJ-60051, PRHF-38689 |
Scalable Platforms |
One member in a Maestro Security Group may be reported as down and inaccessible, the /var/log/messages and $FWDIR/log/fwk.elg logs indicate:
|
|
PRJ-54699, PMTR-104415 |
Scalable Platforms |
Local connections from members at a standby site may fail when using the Same VMAC feature and a VPN Tunnel Interface (VTI) is configured. |
|
PRJ-59844, PRHF-38430 |
Scalable Platforms |
In a Security Group in VSX mode, if an interface's link state changes during boot, there may be a delay in updating the link state. This delay can cause traffic interruption on that interface. |
|
PRJ-62386, PRHF-40338 |
Scalable Platforms |
The CPD process may exit during policy installation on a Scalable Platforms cluster on Check Point Firewall 29000 appliances. |
Take 105
Released on 18 June 2025 and declared as Recommended on 25 June 2025
|
ID |
Product |
Description |
|---|---|---|
|
Take 105 - Improvements and Resolved Issues |
||
|
PRJ-61982, PRJ-61981 |
Threat Extraction |
A memory leak can occur in the Threat Extraction file inspection process for HTTP/S protocols. When memory consumption reaches the maximum allowed allocation, it causes the process to crash and automatically restart. See Critical Information for R81.20 Jumbo Hotfix Accumulator. |
Take 103
Released on 09 June 2025
|
ID |
Product |
Description |
|---|---|---|
|
Take 103 - Improvements and Resolved Issues |
||
|
PRJ-61766, PMTR-116315 |
Threat Extraction |
The Threat Extraction Software Blade may inadvertently delete some system files on the Security Gateway. Refer to sk183512. |
|
PRJ-61822, PRHF-40371 |
VPN |
After an upgrade, Site to Site VPN tunnels (IKEv2) fail to establish. Logs show the "Auth exchange: Sending notification to peer: Invalid syntax" and "INVALID_KE_PAYLOAD" errors for IKE traffic. Refer to sk183550. See Critical Information for R81.20 Jumbo Hotfix Accumulator. |
Take 101
Released on 19 May 2025
|
ID |
Product |
Description |
|---|---|---|
|
Take 101 - New Functionality |
||
|
PRJ-52556 |
CloudGuard Network |
NEW: Added support for CloudGuard Controller scanner for Global NSX-T Manager. Refer to R81.20 CloudGuard Controller Administration Guide. |
|
Take 101 - Improvements and Resolved Issues |
||
|
PRJ-59935, PMTR-113250 |
Gaia OS |
UPDATE: A patch on top of OpenSSL 1.1.1w to fix CVE-2024-13176. Refer to sk183168. |
|
PRJ-58950, PMTR-110805 |
Security Management |
UPDATE: Management upgrade performance is improved by up to 15%.
|
|
PRJ-48563, PRHF-29060 |
Security Management |
UPDATE: Added a tool to extract data from the API logs to get the API usage information. Refer to sk181906. |
|
PRJ-60048, FMW-4284, PMTR-113641 |
CPView |
UPDATE: CPView and SNMP can now show Hide NAT statistics for up to 200 top NAT IP Pools (the default is 3 top NAT IP Pools). Configure the required value for the kernel parameter " |
|
PRJ-53198, PRHF-31159 |
Logging |
UPDATE: Added a mechanism to prevent log display delays, when SmartView reports show "No data found" in some widgets. Refer to sk181209. |
|
PRJ-50210, PMTR-96165 |
Security Gateway |
UPDATE: Improved the FW Monitor command output syntax. Refer to sk30583. |
|
PRJ-58553, FMW-2292, PMTR-110440 |
Security Gateway |
UPDATE: Support TLS 1.3 for the RAD process requests. To activate it, change the TLS version to "TLSv1_3". Refer to sk178505. |
|
PRJ-57078, PRHF-35181 |
Security Gateway |
UPDATE: RAD extended flow information is now logged into a cyclic CSV file - $FWDIR/log/rad_events/rad_flows.csv. This enhancement provides visibility into RAD connections, helping to monitoring and troubleshooting. Refer to sk183108. |
|
PRJ-58753, PRHF-36873 |
Mobile Access |
UPDATE: Added support for the Mobile Access Portal "WebSocket" applications to work in environments with asymmetric network bandwidth (the download speed is faster than the upload speed) between external and internal networks. Refer to sk95311. |
|
PRJ-58257, PMTR-111169 |
ClusterXL |
UPDATE: SecureXL User Mode (UPPAK) is now blocked in Active-Active cluster configurations, as this combination is not supported. |
|
PRJ-60217, ACCHA-3854 |
SecureXL |
UPDATE: Added support for the new Line Card (CPAC-4-10/25F-DA) - 4-Port 10/25G SFP28 Card with Acceleration in 9000, 19000, and 29000 Series Security Appliances. Refer to sk181465 and sk183092. |
|
PRJ-60023 |
SecureXL |
UPDATE: The Bidirectional Forwarding Detection (BFD) protocol is now supported in environments with SecureXL in User Mode (UPPAK). |
|
PRJ-58741, ACCHA-3835 |
SecureXL |
UPDATE: Optimized memory management when processing Jumbo Frames. |
|
PRJ-58999, SDWANGW-2280, PMTR-111637, PRHF-38118 |
SD-WAN |
UPDATE: SD-WAN now supports AWS Cross Availability Zone Clusters, enabling distributed security deployments across multiple AWS regions. |
|
PRJ-58672, SDWANM-2809, PMTR-110601 |
SD-WAN |
UPDATE: In the Gateways Connector feature:
Refer to sk180557. |
|
PRJ-51315, PMTR-98157 |
Harmony Endpoint |
UPDATE: Harmony Endpoint Management Server Anti-Malware (E2) updater now supports Linux packages. Previously, Linux packages were available for download and installation only through other tools. |
|
PRJ-60788, ODU-2443, PRJ-61123, ODU-2491 |
Automatic Updates - Web SmartConsole |
UPDATE: New features and improvements are released in Take 135 and Take 136 via self-updatable package. Refer to sk170314. |
|
PRJ-61149, ODU-2483 |
Automatic Updates - HCP |
UPDATE: Added Update 22 of HealthCheck Point (HCP) Release. Refer to sk171436. |
|
PRJ-58242, PMTR-110065 |
Diagnostics |
After rebooting a Multi-Domain Security Management Server, the CPView (sk101878) and Skyline (sk178566) tools do not return data (for example, when running the " |
|
PRJ-56782, PRHF-35847 |
Diagnostics |
In SmartConsole, in the Gateways & Servers view, under Device & License Information of a Security Gateway or Cluster object, or in CPView and SNMP traps, the value of "new connection rate" for OID .1.3.6.1.4.1.2620.1.1.26.11.6.0 is incorrect. |
|
PRJ-59024, PRHF-37832 |
Security Management |
Access Policy installation may take a long time when updatable objects are used in the policy. |
|
PRJ-58919, PRHF-37819 |
Security Management |
In rare scenarios, policy installation fails with "Policy installation had failed due to an internal error". |
|
PRJ-57322, PRHF-36147 |
Security Management |
When modifying the URL definition type in an Application Site object using the Management API command " |
|
PRJ-59096, PRHF-37788 |
Security Management |
Management Server operations may be slow because of some API commands, and multiple core dumps may be generated. |
|
PRJ-57720, PRHF-36549 |
Security Management |
Inserting the " |
|
PRJ-57138, PRHF-36149 |
Security Management |
In some scenarios, the Security Management Server with a proxy configured is unable to connect to Check Point Portal after changing the proxy settings. |
|
PRJ-57629, PRHF-36614 |
Security Management |
In rare scenarios, Check Point Portal shows the "Failed to update Check Point Portal with objects from your on-premises Management Server. Contact Check Point Support" error. |
|
PRJ-58685, PMTR-110626 |
Security Management |
Duplicated licenses on the Security Management Server may impact the vsec_lic_cli utility. |
|
PRJ-58916, PRHF-37822 |
Security Management |
Policy Installation may not be accelerated after modifying a host in a rule with the inline layer action. |
|
PRJ-58502, PRHF-37445 |
Security Management |
Renaming a Secondary Security Management Server that was promoted to Primary fails. |
|
PRJ-59432, PRHF-38264 |
Security Management |
In some scenarios, opening a specific VPN community in SmartConsole fails and the "Unable to load page" message is printed, while other communities can be opened. |
|
PRJ-59340, PMTR-111778 |
Security Management |
When a Security Gateway object is deleted, its license may still appear as attached even though the Security Gateway Object no longer exists. |
|
PRJ-51378, PMTR-98267 |
Security Management |
The Management API commands " |
|
PRJ-55937, PRHF-34898 |
Security Management |
Packet mode search or search within Object Explorer for IP address ranges may not work correctly on the Standby Security Management Server. |
|
PRJ-59630, PRHF-38384 |
Security Management |
In a rare scenario, December date comments in the IPS User Settings view may display incorrect year. |
|
PRJ-60695, PRHF-39191, PMTR-114757 |
Security Management |
Login using a TACACS Server created with the Management API command " |
|
PRJ-59307, PRHF-38068 |
Security Management |
In some scenarios, the "Log Servers" tab in the Logs & Monitor view of SmartConsole is not visible. Refer to sk183154. |
|
PRJ-57306, PRHF-36241 |
Security Management |
If a custom login message exceeds 1000 characters, the login output file, which contains the sid and other session data, cannot be parsed as expected. Using the " |
|
PRJ-58776, PRHF-37360 |
Multi-Domain Security Management |
In a Multi-Domain Security Management environment, an audit log is not created after changing the "Parent rule for Domain's policy" Domain layer. |
|
PRJ-58873, PRHF-37752 |
Multi-Domain Security Management |
In certain scenarios, when Cluster objects are used in a Multi-Domain Security Management Server with Domains that have Global Domain Assignments, an upgrade may fail with "Tried to persist object OBJ_ID with domain 1e294ce0-367a-11e3-aa6e-0800200c9a66 while active domain is DOMAIN_ID".
|
|
PRJ-58980, PRHF-37890 |
Multi-Domain Security Management |
In some scenarios, the "SIC Error for EntitlementManager: Peer sent wrong DN" error is printed in $CPDIR/log/cpd.elg on a VSX Gateway. |
|
PRJ-59599, PRHF-38330 |
Security Management |
In rare scenarios, Global Policy Assignment fails with an "IPS update is currently running in local domain" message, although IPS update is not running in that Domain. |
|
PRJ-60252, PMTR-114256 |
Multi-Domain Security Management |
Multiple errors "T_get_event: cannot register socket %d (%d sockets already registered for %s)" are printed in $MDSDIR/log/in.msd. |
|
PRJ-59214, PRHF-38104 |
Multi-Domain Security Management |
Policy installation fails on all Domains on the Multi-Domain Security Management Server with "Layer LAYER NAME': Verification failed due to an internal error" if an Externally Managed Security Gateway object with IPsec enabled does not have an encryption Domain. Refer to sk183003. |
|
PRJ-56976, PRHF-35998 |
Multi-Domain Security Management |
In some scenarios, in the Multi-Domain Security Management Server, certain previously utilized global objects may remain hidden from both the SmartConsole's Objects Explorer and the Management API command " |
|
PRJ-57777, PRHF-36292 |
Multi-Domain Security Management |
In some scenarios, on a Multi-Domain Security Management Server, implied rules are not logged for clusters managed by Domains with Global Domain Assignment. |
|
PRJ-59768, PMTR-112934 |
Compliance |
In rare scenarios, the "Blades" widget in the Compliance Software Blade Overview page is blank. |
|
PRJ-59592, PRJ-59591 |
Logging |
When opening a log card in the Logs View, duplicate values may appear in the "Resource" and "Reason" fields. |
|
PRJ-59113, PRHF-37640 |
Security Gateway |
Some Access Control Rule Base flows may increase CPU utilization . |
|
PRJ-60289, PRHF-38919 |
Security Gateway |
Memory handling issue, causing the FWK process to unexpectedly restart. |
|
PRJ-59202, PRHF-37975 |
Security Gateway |
In a rare scenario, the FWK process may unexpectedly exit and bring down the Security Gateway. |
|
PRJ-58743, PRHF-37487 |
Security Gateway |
In a rare scenario, when the Anti-Virus Software Blade and the ICAP Server are enabled, there may be high CPU usage. |
|
PRJ-59352, PRHF-37361 |
Security Gateway |
In a rare scenario, an outage may occur in an Azure environment after one cluster member crashes and recovers. |
|
PRJ-60285, PRHF-38898 |
Security Gateway |
In rare scenarios, HTTPS inspection may block the downloading and uploading of PDF files to and from the Web Server. |
|
PRJ-59606, PRHF-38380 |
Security Gateway |
In a specific scenario, file downloads intermittently stop until resumed manually because of HTTP parsing issues and Content Awareness parsing failures. |
|
PRJ-60202, PRHF-38844 |
Security Gateway |
In a rare scenario, VoIP Traffic fails after the initial call when SecureXL operates in User Mode (UPPAK). Refer to sk183218. |
|
PRJ-59548, PRHF-38160 |
Security Gateway |
In certain scenarios, the $SAMLPORTAL_HOME/logs/error_log file may continuously grow, potentially consuming a significant amount of disk space. |
|
PRJ-60529, PRHF-38547 |
Security Gateway |
In a rare scenario, the Security Gateway may crash during email inspection. |
|
PRJ-60411, PRHF-39061 |
Security Gateway |
Policy installation fails with the error message: "All the rules in layer "<Name of Layer>" contain only expired time objects. See sk155253 for more details". |
|
PRJ-58216, PRHF-37208 |
Security Gateway |
A rare race condition may cause a Security Gateway to restart when updating the statistics. |
|
PRJ-58627, PRHF-36742 |
Security Gateway |
In a Maestro environment with configured Virtual System Load Sharing (VSLS) Mode, one of the Security Gateways on an SGM may be unresponsive until it is restarted several times. |
|
PRJ-59815, PRHF-38598 |
Security Gateway |
In rare scenarios, the CPD process may unexpectedly exit, generating a core dump. |
|
PRJ-57931, PRHF-36685 |
Security Gateway |
In rare scenarios, Security Gateway may crash when running the " |
|
PRJ-59150, PRHF-37843 |
Security Gateway |
After enabling Security Zones in NAT Rule , wrong IP address is shown in logs and NAT is performed incorrectly. Refer to sk183088. |
|
PRJ-59618, PMTR-111544 |
Security Gateway |
In a rare scenario, if the USIM process exits during firewall memory mapping, it can result in a Security Gateway crash. |
|
PRJ-58630, PRHF-36749 |
Security Gateway |
In a rare scenario, the FWK process may exit because of memory corruption. |
|
PRJ-58389, PRHF-36744 |
Security Gateway |
The DSD process (Dynamic Split Daemon) may exit when the " |
|
PRJ-58633, PRHF-37150 |
Security Gateway |
On a Security Group Member, one of the Security Gateways using Virtual System Load Sharing (VSLS) may become unresponsive. |
|
PRJ-60945, PRHF-39464 |
Security Gateway |
The CPD or FWK process may unexpectedly restart when handling the interface statistics. Refer to sk183544 |
|
PRJ-57739, PRHF-36496 |
Security Gateway |
Local connections originating from the Security Gateway may fail to refresh their timeout values. |
|
PRJ-60803, PRHF-38473 |
Security Gateway |
The FWK process exits with core dumps and error messages in $FWDIR/log/fwk.elg: "malware_res_rep_match_dns_response: check_dns_response_activate() failed". |
|
PRJ-60852 |
Security Gateway |
In some scenarios, when working with SecureXL in User Mode (UPPAK) and enabling a debug filter, the Security Gateway may crash. |
|
PRJ-55871, PRHF-37089, PMTR-106133 |
Security Gateway |
In rare scenarios, in a VSX environment, a Virtual System may boot with the default filter. Refer to sk182453. |
|
PRJ-61154, PRHF-39691 |
Security Gateway |
A rare issue in HTTP/2 multiplexing may lead to traffic disruption. Refer to sk183441. |
|
PRJ-55775, PMTR-104789 |
Security Gateway |
Using NAT64 may lead to high memory consumption (memory leak) because some packets are not released. |
|
PRJ-59130, PRHF-38022 |
Security Gateway |
The DHCPv6 relay drops reply messages from the DHCPv6 server rather than forwarding them to the clients. |
|
PRJ-50282, PRHF-26394 |
Security Gateway |
In rare scenarios, the CPD process may unexpectedly exit and create a core dump file. |
|
PRJ-57786, PMTR-100187 |
Security Gateway |
The "fileapp_parser_get_attribs: call orig_get_attrib failed" error is printed in the $FWDIR/log/fwk.elg file. |
|
PRJ-41828, PRHF-25598 |
Security Gateway |
When a NAT-T tunnel is set up between VPN peers, packets having UDP encapsulation added to the headers are not transmitted out of the PPPoE interface as they should be. VPN connection appears to be established but does not actually pass traffic. |
|
PRJ-57868, AAD-2659 |
Threat Prevention |
In rare scenarios, SSH connections may be dropped when SSH Deep Packet Inspection (SSH DPI) is activated on the Security Gateway. |
|
PRJ-55826, PRHF-34607 |
Threat Prevention |
The Anti-Virus Software Blade incorrectly classifies the *.pqx files as *.zip files, resulting in failure logs. |
|
PRJ-59027, PRHF-35823 |
Threat Prevention |
In some scenarios, when Zero Phishing is enabled, kernel crash may occur. |
|
PRJ-55328, PRHF-33276 |
Threat Emulation |
In rare scenarios, the Threat Emulation Software Blade may fail to correctly classify the file type. |
|
PRJ-59610, PRHF-38383 |
Application Control |
If the Access Rule Base does not contain Extended/Detailed Log Tracking options, category override functionality fails when the "partial load" feature is enabled. |
|
PRJ-59616, PRHF-38387 |
Application Control |
Some custom applications in the HTTPS Inspection policy are not matched if they are part of a Group object. Refer to sk183176. |
|
PRJ-58636, PRHF-37064 |
Application Control |
The $FWDIR/log/fwk.elg file may be flooded with the Application Control information messages "appi_clobs_observer_convert_context_dependent_ex: application id (60341234) has unknown context id and won't be free", "appi_clobs_observer_convert_context_dependent_ex: unknown exists: current cmi context = 181 ; removed dependent context = 720". This is a cosmetic issue. |
|
PRJ-58756, PRHF-37462 |
URL Filtering |
In some scenarios, when URL Filtering Software Blade analyzes web requests, the RAD error may appear in the /var/log/messages file: "rad_kernel_urlf_request_serialize: string len =XXXX bigger than max 4096". |
|
PRJ-57181, PRHF-36126 |
URL Filtering |
URL Filtering may not classify a site in a specific rare scenario when the Security Gateway is configured as a proxy. |
|
PRJ-56475, PRHF-35174 |
IPS |
In some scenarios, a Security Gateway is not listed as an option for the Threat Prevention uninstall, even though the Threat Prevention Software Blade is disabled on the Security Gateway object. |
|
PRJ-59573, PMTR-112600 |
IPS |
In rare scenarios, a memory leak in the FWK process may occur when IPS is active. |
|
PRJ-59376, PRJ-59379 |
Anti-Virus |
In some scenarios, the user configurations are overwritten in the RAD configuration file. |
|
PRJ-49484, PRHF-30036 |
Anti-Virus |
When Anti-Virus is enabled, files are not downloaded with the "Failed writing the file" error printed in logs, and the block page is not displayed. |
|
PRJ-58655, PRHF-37376 |
Anti-Virus |
RAD queries fail, generating "wrong status code in reply" errors logged in $FWDIR/log/rad_events/Error/* files. Refer to sk183009. |
|
PRJ-58840, PMTR-105936 |
Anti-Bot |
When the Security Gateway with FIPS mode is enabled, running the Anti-Virus and Anti-Bot Software Blades updates with the " |
|
PRJ-60010, PMTR-113461 |
Anti-Bot |
In some scenarios, the Anti-Bot Software Blade fails to parse external IoC feeds with IP address observables. |
|
PRJ-56079, PMTR-103768 |
Anti-Bot |
In rare scenarios, the Anti-Bot Software Blade may fail to inspect Domains because of communication errors with ThreatCloud. |
|
PRJ-59223, PRHF-38081 |
Anti-Bot |
In some scenarios, a SmartConsole log with the Anti-Bot Software Blade entries may appear when the Anti-Bot Software Blade is disabled in the profile. |
|
PRJ-58829, PMTR-111480 |
Anti-Bot |
The "malware_res_rep_match_dns_response: check_dns_response_activate() failed" error is printed in the $FWDIR/log/fwk.elg file. This is a cosmetic issue. |
|
PRJ-57460, PMTR-109067, PRJ-58870, PMTR-110943 |
SSL Inspection |
When a TLS connection is rejected because of no shared key exchange between the client and the Security Gateway, no log is generated to inform the administrator. |
|
PRJ-60105, PRHF-38755 |
Mobile Access |
The HTTPD process periodically exits when accessing the Mobile Access Software Blade Citrix application because of the memory leak in the Citrix proxy implementation. |
|
PRJ-46241, PMTR-87652 |
Mobile Access |
In a VSX environment, the WebSocket applications in Mobile Access may fail to resolve their destination addresses through DNS when the DNS configuration at the global level differs from the DNS configuration of a local Virtual System. |
|
PRJ-60296, PMTR-98413 |
ClusterXL |
In rare scenarios, the FWK process exits during a cluster failover. |
|
PRJ-59490, PMTR-111453 |
ClusterXL |
During cluster startup with routing separation enabled, a mismatch between routing and firewall process initialization can trigger premature full synchronization pnotes when the routing process is not fully synchronized. |
|
PRJ-59362, PMTR-111468 |
SecureXL |
When SecureXL is in User Mode (UPPAK), in a VSX environment with many virtual systems, the Gaia Portal may not be accessible when it reaches its internal connection limit. |
|
PRJ-59968, PMTR-113266 |
SecureXL |
A warning message "adp_rt4_delete: rt entry .... does not exist for slot 1" may be printed in the /var/log/dmesg file while VPN the connection remains active. |
|
PRJ-59915, PMTR-113479 |
SecureXL |
In some scenarios, the Security Gateway may crash while running " |
|
PRJ-60395, PRHF-39028, PRJ-60383, PRHF-38461 |
SecureXL |
In an asymmetric UDP traffic scenario (Client-to-Site VPN and Site-to-Site VPN distributed to different members), the connection may not get accelerated. |
|
PRJ-60309, PMTR-114110 |
SecureXL |
The USIM_x86 may potentially exit because of a race condition when a route is simultaneously used by multiple SND cores. |
|
PRJ-60466, PMTR-114455 |
SecureXL |
In some scenarios, a memory leak occurs in the FWK process when SecureXL fails to update an existing route's next hop. |
|
PRJ-60055, PRHF-38747 |
SecureXL |
After a VSX reboot, other Virtual Systems (VS's) enter a Down/Lost state while USIM core files are generated. |
|
PRJ-60255, PMTR-113688 |
SecureXL |
SecureXL in User Mode (UPPAK) may restart when the Security Gateway is under high load and cpWatchDog triggers a reboot. |
|
PRJ-61004 |
SecureXL |
SecureXL in User Mode (UPPAK) may restart when adding or removing VLAN interfaces and the Security Gateway is under high load. |
|
PRJ-60567, PMTR-113304 |
SecureXL |
In a rare scenario, the Security Gateway may become unresponsive during extended high memory utilization. |
|
PRJ-60685, PRHF-39209 |
SecureXL |
The packets may not be accelerated because of a routing issue. |
|
PRJ-60413, PMTR-114373 |
SecureXL |
The Hardware Acceleration offloaded connection may break when the route is updated, affecting the offload flow and slowing down operations. |
|
PRJ-58781, ROUT-3107 |
Routing |
The ROUTED daemon may exit with a coredump file during IBGP synchronization. |
|
PRJ-58787, PRHF-37697 |
Routing |
Duplicate entries in the kernel routing table can occur when iBGP peers disconnect and reconnect, causing the same routes to be added multiple times rather than properly replaced. |
|
PRJ-59244, ROUT-3336 |
Routing |
The ROUTED daemon asserts when enabling eBGP multihop on a directly connected interface. |
|
PRJ-60237, PRHF-37606 |
Routing |
In rare cases, when an internal BGP (iBGP) peer disconnects during a graceful restart, BGP may fail to advertise all routes. However, the missing routes still appear under "adj-rib-out" with a next hop of "0.0.0.0." |
|
PRJ-58953, PMTR-86085 |
Routing |
Netflow logs appear in the /var/log/messages file, although NetFlow is not enabled. Refer to sk109038. |
|
PRJ-60019, ROUT-2303, PMTR-113526, PRHF-38771 |
Routing |
When configuring a per-peer local address in BGP, IPv6 local address validation fails. |
|
PRJ-60100, HAAN-880 |
Routing |
BGP sessions may terminate upon receiving a BGP Update containing an AS_SET Path Attribute when Peer Local AS was configured on the Security Gateway. |
|
PRJ-59011, PRHF-37820 |
Gaia OS |
In a Maestro environment, an error message about short string length may be incorrectly displayed when setting an expert password string that includes the colon ":" character on the Security Gateway. |
|
PRJ-58802, PRHF-37713 |
Gaia OS |
When attempting to create cloning groups on an R82 Security Gateway, the "Error - Home directory for 'cadmin' cannot be in /home/cadmin directory" error is printed. Refer to sk182989. |
|
PRJ-60485 |
Gaia OS |
Incorrect SmartConsole download link in the Gaia Portal. |
|
PRJ-57126, PMTR-108327 |
VPN |
VPN traffic may be dropped when there is Large Scale VPN (LSV) peer. |
|
PRJ-48114, PMTR-109855 |
VPN |
When a network connection is established simultaneously in both directions (server-to-client and client-to-server), the Security Gateway experiences connectivity issues because of incorrect packet dispatching, leading to dropped packets. Refer to sk183072. |
|
PRJ-47094, PRHF-27999 |
VSX |
In a VSX environment, the Security Gateway may crash when removing an interface from topology. |
|
PRJ-47769, PMTR-93189 |
VSX |
The FWM core dump file is created when running the " |
|
PRJ-55478, PRHF-34244 |
VSX |
In rare scenarios, an entry in the FDB (bridge forwarding table) may be incorrectly marked as "Do not update". This can cause a traffic outage lasting several minutes after a Virtual System fails over from one member to another. This issue only affects users who are using both VSLS with VS distribution and a vSwitch. |
|
PRJ-57293, PRHF-36254 |
VSX |
Output of the " |
|
PRJ-59170, PRHF-37466 |
VSX |
A memory leak may occur in a VSX environment, related to the transmitting packets module. |
|
PRJ-57672, PMTR-109851 |
VSNext |
Creating multiple Virtual Gateways may fail with "Setting management connection failed!". |
|
PRJ-60459, PMTR-114441, VSECPC-10081 |
CloudGuard Network |
The CloudGuard Network Central License utility incorrectly distributes licenses to Azure Virtual vWAN Gateways that already have licenses included during deployment. |
|
PRJ-59474, SDWANGW-2360, PMTR-112190 |
SD-WAN |
Dynamic IP address changes for DAIP Gateway objects are not propagated to all Security Gateways in the SD-WAN VPN community, causing VPN connectivity failures. |
|
PRJ-47625, PRHF-29470 |
Scalable Platforms |
DNS configuration may not be pulled to other Security Gateway Members (SGMs) from the Single Management Object (SMO). |
|
PRJ-58488, PMTR-109895 |
Scalable Platforms |
Upon contract renewal, non-SMO members in the Maestro Security Group may not get the updated contract automatically.
|
|
PRJ-52526, PMTR-98152 |
Scalable Platforms |
When a new user is added via the Gaia gClish command " |
|
PRJ-60893, PRHF-39212 |
Scalable Platforms |
TCP and UDP traffic over VLAN IDs greater than 2024 does not pass through a Maestro Security Group when SecureXL in User Mode (UPPAK) is enabled. Refer to sk183337. See Critical Information for R81.20 Jumbo Hotfix Accumulator. |
|
PRJ-61044, FMW-4849, PRHF-39679 |
Scalable Platforms |
In Maestro deployments with SecureXL working in User Mode (UPPAK), after an upgrade, CIN traffic may be dropped and cause outage. |
|
PRJ-59984, PRHF-38615 |
Scalable Platforms |
High CPU utilization is detected in Maestro Security Group because of multiple instances of the " |
|
PRJ-59167, FMW-3410 |
Scalable Platforms |
The "ws_mux_host_only_active_pass: ERROR: There is not enough data in stream to pass" error may be printed in logs. This is a cosmetic issue. |
|
PRJ-58087, PRHF-36586 |
Scalable Platforms |
Configured proxy ARP may not work as expected, when the "Same VMAC" feature is enabled. |
|
PRJ-58161, PMTR-113610 |
Scalable Platforms |
IP broadcast helper cannot forward the packets if the IP address of the "relay to" is not directly connected to the Security Gateway. |
|
PRJ-58303, PRHF-37070 |
Scalable Platforms |
In a Maestro environment, migrating a Virtual System between Security Groups may cause a member to crash. |
Take 99
Released on 20 March 2025 and declared as Recommended on 04 May 2025
|
ID |
Product |
Description |
|---|---|---|
|
Take 99 - New Functionality |
||
|
PRJ-52612, PRHF-31058 |
SSL Inspection |
NEW: This Take introduces a fail-open mechanism for HTTPS Inspection with Hardware Security Module (HSM) integration. If the HSM becomes unavailable, TLS connections now automatically bypass HTTPS Inspection, ensuring continuous network connectivity. |
|
PRJ-58467, ROUT-3004 |
Routing |
NEW: Added a new Gaia Clish parameter to ignore the Autonomous System (AS) Path when aggregating routes: " |
|
Take 99 - Improvements and Resolved Issues |
||
|
PRJ-58380, PMTR-110261 |
Mobile Access |
UPDATE: Resolved CVE-2024-52887 - Self-XSS vulnerability in Mobile Access Native Applications 'favorites' dialog. Refer to sk183054. |
|
PRJ-58395, PMTR-110274 |
Mobile Access |
UPDATE: Resolved CVE-2024-52888 - Mobile Access File Share applications are vulnerable to stored XSS attacks. Refer to sk183055. |
|
PRJ-56535, PRHF-34745 |
Security Management |
UPDATE: The Management API saves outbound payloads in the $FWDIR/log/api.elg file only for non-"200" response codes. It is now possible to enable the "WRITE_FULL_OUT_PAYLOAD" environment variable to force comprehensive logging of all API call payloads, regardless of the response status. Refer to sk182786. |
|
PRJ-55606, PRHF-34346 |
Multi-Domain Security Management |
UPDATE: Added a log print to warn about unsupported SIC reset configurations on Multi-Domain Security Management Server / Multi-Domain Log Management Server and to alert when a Domain lacks an ObjectStoreDomain, which prevents CPM from starting. Refer to sk182533. |
|
PRJ-57847, PMTR-109621 |
Logging |
UPDATE: Enhanced the CLI " |
|
PRJ-58668, PMTR-110592 |
Security Gateway |
UPDATE: Added multi-interface packet fragment reassembly support to prevent drops in Equal Cost Multipath (ECMP) environments. |
|
PRJ-53148, PRHF-32539 |
Security Gateway |
UPDATE: Reduced memory usage of LDAP keepalives and improved connection error handling, resulting in improved performance. |
|
PRJ-55618, PRHF-34380 |
Security Gateway |
UPDATE: Added information about VSX context to the mem.report files. |
|
PRJ-58814, PRHF-37100 |
Security Gateway |
UPDATE: Added a kernel parameter "
Refer to sk120633. |
|
PRJ-57147, PMTR-108406 |
Security Gateway |
UPDATE: Optimized handling of |
|
PRJ-54141, PRHF-31274 |
SSL Inspection |
UPDATE: HTTPS Inspection statistics are now available through SNMP requests. |
|
PRJ-57527, PMTR-109151 |
SecureXL |
UPDATE: Improved throughput of GRE tunnels configured on the ports of the 100G Acceleration Card when SecureXL works in UPPAK mode. |
|
PRJ-58465, PRHF-33825 |
Routing |
UPDATE: IP Reachability Detection now supports simultaneous BFD and ping monitoring to the same remote address, where previously only one method was functional at a time. When both are configured, each monitoring protocol operates independently, allowing features to track their preferred detection method while maintaining existing configuration syntax. |
|
PRJ-56896, PMTR-107995 |
Gaia OS |
UPDATE: Added validation rules to ensure file names meet the required format when restoring backups using Clish. |
|
PRJ-54385, PRHF-33678 |
Gaia OS |
UPDATE: Added vertical scroll bar functionality to the Gaia Portal login page to enable viewing of long banner messages. |
|
PRJ-49363, PRJ-49367 |
CloudGuard Network |
UPDATE: NSX-T in-place upgrade is now supported. Refer to CloudGuard Network for NSX-T Security Gateway Deployment Guide. |
|
PRJ-57804, PRJ-57795 |
CloudGuard Network |
UPDATE: CloudGuard Network for AWS Gateway Load Balancer Auto Scaling Group now supports inspection of IPv6 traffic encapsulated with GENEVE IPv4 headers. |
|
PRJ-57220, PMTR-110740 |
CloudGuard Network |
UPDATE: Traffic between an external network host and an internal network host is now accelerated when a static NAT is configured to translate a cluster member's IP address or specific high port to an internal host IP address or specific service port. This scenario is relevant in Check Point CloudGuard Network Security Azure High Availability deployments, where traffic passes through a Load Balancer.
|
|
PRJ-57903, PMTR-109685, PRJ-58608, PMTR-110518 |
Scalable Platforms |
UPDATE: Added support for 28 Security Group Members in a Maestro Security Group (Single Site deployment) that runs SecureXL in the User Mode (UPPAK) or in the Kernel Mode (KPPAK). Refer to sk182803. |
|
PRJ-58878, ODU-2219, PRJ-59438, ODU-2323, PRJ-60329, ODU-2403 |
Automatic Updates - Web SmartConsole |
UPDATE: New features and improvements are released in Take 125, Take 128 and Take 134 via self-updatable package. Refer to sk170314. |
|
PRJ-58989, ODU-2195 |
Automatic Updates - CPView |
UPDATE: Added Take 141 of CPotelcol (OpenTelemetry Collector) Release Updates. Refer to sk180522. |
|
PRJ-58995, ODU-2203 |
Automatic Updates - CPView |
UPDATE: Added Take 44 of CPviewExporter Release Updates. Refer to sk180521. |
|
PRJ-59280, ODU-1579 |
Automatic Updates - Threat Prevention |
UPDATE: Added Update 25 of Autonomous Threat Prevention Management integration Release. Refer to sk167109. |
|
PRJ-59322, ODU-2259 |
Automatic Updates - HCP |
UPDATE: Added Update 21 of HealthCheck Point (HCP) Release. Refer to sk171436. |
|
PRJ-59996, ODU-2227 |
Automatic Updates - Smart-1 Cloud |
UPDATE: Added Update 8 of Smart-1 Cloud. Refer to sk166056. |
|
PRJ-58273, PRHF-37209 |
Security Management |
In rare scenarios:
|
|
PRJ-57068, PRHF-36058 |
Security Management |
After an upgrade, when browsing to SmartConsole > Manage & Settings > Permissions & Administrator > Administrators, the page may display "Error retrieving results". |
|
PRJ-56973, PRHF-36032 |
Security Management |
Using the Management API command " |
|
PRJ-57781, PRHF-36576 |
Security Management |
In rare scenarios, publishing Multi-Domain Security Management level changes such as Administrator configuration changes fails. The "Action Failed due to an Internal Error" error is displayed. |
|
PRJ-54488, PRHF-33773 |
Security Management |
Scheduled Snapshot Issues:
Refer to sk182665. |
|
PRJ-46671, PMTR-63558 |
Security Management |
In the Management API, when setting " |
|
PRJ-58717, PRHF-37561 |
Security Management |
Changes to a SmartConsole administrator's Authentication Server (RADIUS or TACACS) may occasionally fail to take effect. |
|
PRJ-58850, PRHF-37388 |
Security Management |
In rare scenarios, a core file of the CPRLIC process is generated. |
|
PRJ-57035, PRHF-35374 |
Security Management |
In some scenarios, deleting a Security Gateway object fails if the Security Gateway is a participant in Global VPN Community. |
|
PRJ-58471, PRHF-37430 |
Security Management |
Creating a Threat Prevention Exception from a log fails with the "Failed to add exception" error when the "File Name" field in the log contains a Windows directory separator ("\"). |
|
PRJ-58447, PRHF-37393 |
Security Management |
In rare scenarios, Revert to Database Revision is stuck at 10%. |
|
PRJ-58900, PRHF-37631 |
Security Management |
After an IPS update, reassigning global policies may take a long time. |
|
PRJ-57538, PRHF-36475 |
Security Management |
In some scenarios, the Management API command " |
|
PRJ-57916, PMTR-43993 |
Security Management |
In rare scenarios, the CPD process may unexpectedly exit and create a core dump file. Refer to sk182787. |
|
PRJ-48282, PRHF-29640 |
Security Management |
Execution of the Management API commands " |
|
PRJ-58523, PRHF-37446 |
Security Management |
In rare scenarios, login to SmartConsole may fail with the timeout. |
|
PRJ-57396, PRHF-36340 |
Security Management |
In rare scenarios, when more than one Security Software Blade is enabled on the Security Gateway, Install Policy Presets may fail after purging all revisions. |
|
PRJ-58340, PRHF-37251 |
Security Management |
In rare scenarios, login to SmartConsole using LDAP, TACACS or RADIUS authentication fails with a timeout. |
|
PRJ-57817, PMTR-107227 |
Security Management |
In some scenarios, Web SmartConsole session gets disconnected after several minutes. |
|
PRJ-59058, PRHF-37185 |
Security Management |
When using SmartWorkflow on a Security Management Server with more than 200 administrators, requests may stall or cause SmartConsole crashes during submission. |
|
PRJ-58573, PRHF-37436 |
Security Management |
Global Policy Reassignment fails with the "org.postgresql.util.PSQLException: ERROR: more than one row returned by a subquery used as an expression" error printed in the $FWDIR/log/cpm.elg file. |
|
PRJ-57657, PRHF-36501 |
Security Management |
In some scenarios, High Availability synchronization fails with "NGM failed to export data" because of invalid Global Domain Assignments. |
|
PRJ-60043, FMW-4330, PMTR-113639 |
Security Management |
In cloud environments, in a rare scenario, when using updatable objects in security policies, policy installation fails when the updatable objects package is missing. |
|
PRJ-58846, PRHF-34721 |
Multi-Domain Security Management |
In a Multi-Domain Security Management environment with a VSX Security Gateway, such operations as login to SmartConsole, Global Domain Assignment, Domain creation or deletion may take longer than expected or fail with a timeout message "Task failed". |
|
PRJ-57981, PRHF-36890 |
Multi-Domain Security Management |
In rare scenarios, an upgrade of Multi-Domain Security Management Server, handling Domain Log Server certificates, may get stuck.
|
|
PRJ-58029, PRHF-36922 |
Multi-Domain Security Management |
In rare scenarios, in Multi-Domain Security Management environments, domain creation fails with "Failed to create Domain server "Domain name" Permission calculation failed." |
|
PRJ-57784, PRHF-36479 |
Multi-Domain Security Management |
In environments where not all Domains are Active on the same Server (for example, in a multi-site environment), and there is no Domain Management Server for a specific Domain, logs from that Domain are not forwarded to the Check Point Portal. |
|
PRJ-45340, PRHF-23903 |
Multi-Domain Security Management |
In a Multi-Domain Security Management environment, RADIUS authentication may be sent with an incorrect IP address. Refer to sk180723. |
|
PRJ-58264, PRHF-37258 |
Multi-Domain Security Management |
In rare scenarios, the " |
|
PRJ-59347, PMTR-111094 |
Logging |
In the cloud environments (Smart-1 Cloud and EPMaaS), logs query may fail because of the AWS certificate change. |
|
PRJ-59585, PRHF-38427 |
Logging |
In rare scenarios, after an upgrade, SmartConsole does not display logs in the Logs & Monitor tab, and the page remains blank. Refer to sk183086. |
|
PRJ-59397, PRJ-59397 |
Logging |
After an upgrade, Log Sharing feature does not function as expected, "Encountered an internal error" is printed in the Infinity Services view, under Log Sharing status, and LOG_EXPORTER core dumps are generated. See Critical Information for R81.20 Jumbo Hotfix Accumulator. |
|
PRJ-55407, PRHF-34152 |
Logging |
In rare scenarios, the description of IPS Logs in the Logs view may be unclear. Refer to sk182386. |
|
PRJ-57675, PRHF-36647 |
Security Gateway |
A stability issue where the ICAP Server may unexpectedly restart when processing traffic from a Security Gateway with Threat Emulation enabled. |
|
PRJ-56296, PMTR-106906 |
Security Gateway |
The FWK process on the Security Gateway may exit when processing the HTTP traffic. |
|
PRJ-47910, PRHF-29290 |
Security Gateway |
Intermittent drops of transmission packets for "Streaming Engine: TCP Invalid Retransmission" causing HTTP loading issues. Refer to sk181282. |
|
PRJ-53185, PMTR-111974 |
Security Gateway |
High CPU usage on SND cores related to processing network traffic and distributing it to the appropriate firewall instances. |
|
PRJ-59118, PMTR-110235 |
Security Gateway |
In a rare scenario, the RAD daemon may crash during large memory allocation operations. |
|
PRJ-57828, PRHF-36779 |
Security Gateway |
In some scenarios, an HTTP format size protection exception is not applied to the HTTP/2 flow. |
|
PRJ-50630, PRHF-29467 |
Security Gateway |
GTP-U traffic may be dropped because of incorrect message type handling. |
|
PRJ-50698, PRHF-30983 |
Security Gateway |
Running the " |
|
PRJ-58188, PRHF-35819 |
Security Gateway |
After an upgrade, Dynamic Balancing does not start. The " |
|
PRJ-58151, PRHF-37032 |
Security Gateway |
In a rare scenario, the FWK process may exit when HTTPS Inspection is enabled and TLS connections are inspected on non-standard ports (ports other than 443 or 8080). |
|
PRJ-58090, PMTR-109845 |
Security Gateway |
When the autodebug feature is enabled, the RAD service may consume high CPU and trigger "RAD service not available" alert logs. |
|
PRJ-56910, PRHF-35918 |
Security Gateway |
The FWK process may unexpectedly exit after policy installation failure. |
|
PRJ-58205, PRHF-36513 |
Security Gateway |
Incorrect Rule Base parameters synchronization logic may lead to the FWK process exit. |
|
PRJ-57598, FMW-2980 |
Security Gateway |
In some scenarios, the FWK process may exit when traffic is inspected by Content Awareness. |
|
PRJ-57961, PRHF-36794 |
Security Gateway |
In some specific HTTP/2 traffic scenarios, a valid connection may fail. |
|
PRJ-58560, PRHF-37532 |
Security Gateway |
Enabling the CoreXL Dynamic Split feature causes high CPU load on Maestro Security Group Members because of multiple " |
|
PRJ-56199, FMW-795 |
Security Gateway |
Large NAT Rule Base (more than 2,000 rules), may lead to high CPU usage during packet processing. |
|
PRJ-54402, PRHF-33615 |
Security Gateway |
In rare scenarios, after an upgrade, the FWK process may unexpectedly exit because of memory corruption. |
|
PRJ-58419, PRHF-37014 |
Security Gateway |
Android devices' HTTP HEAD requests to Google services are blocked by Security Gateway proxy, generating excessive logs that impact Security Gateway performance through high CPU usage. Refer to sk182990. |
|
PRJ-47275, PMTR-92832 |
Security Gateway |
When Dynamic Split is enabled, SND synchronization fails between members on Active site and Standby site, although it should occur automatically, when one of the members receives an additional SND. |
|
PRJ-58392, PRHF-36652 |
Security Gateway |
In some scenarios, a memory leak may occur in the FWK process. |
|
PRJ-56941, PRHF-32506 |
Security Gateway |
VoIP H.323 calls are dropped with reason "Handler 'h323_h245_code' reject". Refer to sk182835. |
|
PRJ-49694, PRHF-30506 |
Security Gateway |
High CPU utilization on the new Active cluster member after a failover. Refer to sk182040. |
|
PRJ-53323, PRHF-32698 |
Security Gateway |
PPPoE interface fails to restart when it is disconnected from the Server side. Refer to sk182154. |
|
PRJ-58860, PMTR-110741, PRJ-56437, PRHF-35363 |
Security Gateway |
In rare scenarios, the FWK process may unexpectedly exit. |
|
PRJ-56403, PRHF-35372 |
Internal CA |
The " |
|
PRJ-57045, PRHF-36045 |
Identity Awareness |
In a rare scenario, the PDPD process may unexpectedly exit during policy Installation. |
|
PRJ-57644, PRHF-36542 |
Identity Awareness |
In a rare scenario, when |
|
PRJ-58130, PRHF-36964 |
Identity Awareness |
In a rare scenario, the PDPD process may unexpectedly exit during PDP sharing flow. |
|
PRJ-55652, PRHF-34020 |
Application Control |
In some scenarios, a custom application does not match a URL Filtering rule. |
|
PRJ-56812, SDWANGW-712 |
Application Control |
An application may not be matched to an Application Control rule. |
|
PRJ-58459, PRHF-37149 |
Application Control |
HTTP traffic dropped by PSL because of missing Host header. Refer to sk183569. |
|
PRJ-57505, PMTR-108132 |
URL Filtering |
IPv6 address ranges defined in IoC feeds may fail to be enforced, not allowing proper filtering of IPv6 traffic. |
|
PRJ-55515, PRHF-34270 |
URL Filtering |
In a rare scenario, an IoC feed containing a long URL type observable may not be enforced. |
|
PRJ-54399, PRHF-33607 |
IPS |
In a rare scenario, the FWK may unexpectedly exit because of a memory allocation issue. |
|
PRJ-57764, PRHF-33315 |
IPS |
In some scenarios, the DNS Tunneling IPS protection does not function as expected. Refer to sk178487. |
|
PRJ-57968, PRHF-36711 |
DLP |
The DLP Software Blade may not block the password-protected files of a specific type, although it should. |
|
PRJ-56281, PRHF-35095 |
DLP |
The DLPU process may exit with a core dump file. |
|
PRJ-56516, PRHF-35504 |
DLP |
DLP policies may not correctly block password-protected and unprotected files during Google Drive uploads, despite Content Awareness Software Blade configuration. |
|
PRJ-58169, PRHF-37164 |
Anti-Virus |
In a specific scenario involving a long-lived SMTP connection, the memory usage allocated by the Anti-Virus Software Blade steadily increases over time. |
|
PRJ-58286, PMTR-109114 |
Anti-Virus |
In a rare scenario, when the Anti-Virus Software Blade is enabled, the Security Gateway may crash during traffic inspection. |
|
PRJ-53157, PRHF-32596 |
Anti-Virus |
In specific scenarios, the Anti-Virus file type classification engine incorrectly identifies Microsoft Office documents as ZIP archives, leading to improper handling of these files. |
|
PRJ-58737, PRJ-58810 |
Mobile Access |
After an upgrade, the Mobile Access Software Blade's CVPND daemon fails to load and the Mobile Access Portal becomes inaccessible when adding new Virtual Systems or converting to a VSX Gateway, due to improper updates to the gateway-side configuration file $CVPNDIR/conf/cvpnd.C. Refer to sk183293. |
|
PRJ-57390, PRHF-36150 |
Mobile Access |
A "No matching appID candidates found for 'push'" message appears when modifying push notification settings on Capsule Workspace. Refer to sk182974. |
|
PRJ-54055, PRHF-33345 |
Mobile Access |
The debug output file for Mobile Access, named "exchangeRegistration_portal_error_log" is increasing in size. |
|
PRJ-59583 |
ClusterXL |
The FWK process may exit after enabling or disabling the "Same VMAC" feature. Refer to sk165674. |
|
PRJ-52524, PRHF-32026 |
ClusterXL |
When attempting to configure the minimum number of required subordinate interfaces for Bond Load Sharing, the settings are not applied. |
|
PRJ-56635, PMTR-107128 |
ClusterXL |
In a cluster environment, proxy flow error may cause repeated log messages in the $FWDIR/log/fwk.elg file: "de_allocate_port: fwx_alloc_global_del failed (second try)". |
|
PRJ-58891, HAAN-883 |
SecureXL |
The " |
|
PRJ-58080, PMTR-68784 |
SecureXL |
Packet drops may occur if the same multicast packet is received on multiple interfaces. |
|
PRJ-53631, PRHF-32840 |
SecureXL |
High volumes of RST packets may cause CPU spikes, resulting in incoming network packet drops on SND instances. |
|
PRJ-58275, PMTR-110096 |
SecureXL |
SecureXL User Mode crashes if an acceleration card interface has an MTU above 9000 and receives frames larger than 9234 bytes. |
|
PRJ-60159, PRHF-38880 |
SecureXL |
Routing related connectivity and stability issues may occur when SecureXL operates in User Mode (UPPAK). Refer to sk183181. See Critical Information for R81.20 Jumbo Hotfix Accumulator. |
|
PRJ-60103, PMTR-106961 |
SecureXL |
Security Gateway may crash with a vmcore during next hop routing table lookups. |
|
PRJ-57986, ROUT-3189 |
Routing |
Static routes may get permanently deleted from the kernel during rapid interface configuration changes when there is a large number of routes. |
|
PRJ-57990, PRHF-36805 |
Routing |
The "iphelper" (IP Broadcast Helper) service may trigger high CPU utilization because of a recursive packet broadcasting loop between network interfaces. |
|
PRJ-59287, PMTR-111756 |
Routing |
SecureXL may drop traffic with "cphwd_send_packet Reason: F2P outbound processing failed (CPAS)". Refer to sk183194. |
|
PRJ-54133, PRHF-33418 |
VPN |
Two or more Endpoint Security VPN (Remote Access VPN) users may get the same Office Mode IP address. Refer to sk182537. |
|
PRJ-54558, PRHF-33826 |
VPN |
Policy installation in large scale VPN environments may take a long time. |
|
PRJ-56804, PRHF-34632 |
VPN |
SSL Network Extender (SNX) traffic on Maestro may be dropped with "vpnk_tcpt invalid negative tunnel id". Refer to sk182806. |
|
PRJ-57942, PMTR-108894 |
VPN |
When configuring machine authentication without an LDAP server, the computer is authenticated during the connection with the RA VPN. However, the logs in SmartConsole do not display the "Authenticated machine ..." message as expected. |
|
PRJ-56527, PRHF-34034 |
VPN |
Multi-Portal Certificates are not updated through policy installation but only after terminating the VPND process or performing a reboot or " |
|
PRJ-55554, PRHF-34063 |
VPN |
Policy installation fails with "ERROR: Duplicate keys <0000001b, ac130265, ac130265> in table vpn_routing_correction" when duplicating keys in a VPN table and "Encryption domain per community" is configured. Refer to sk182353. |
|
PRJ-58000, PRHF-36849 |
VPN |
Capsule VPN connectivity failures may occur after a configuration change of the VPND daemon table parameters. |
|
PRJ-59690, SMBGWY-7704 |
VPN |
Repeatedly lost connection to resources located behind a Remote Access VPN Gateway. Refer to sk183147. See Critical Information for R81.20 Jumbo Hotfix Accumulator. |
|
PRJ-58248, PRHF-37106 |
VSX |
SNMP counters may return incorrect data on VSX. |
|
PRJ-54638, PRHF-33880 |
VSX |
The " |
|
PRJ-57745, PRHF-36734 |
VSX |
In a rare scenario, during the VSX Gateway Wizard, SmartConsole disconnects with the warning "The connection with the server was lost. Any unsaved changes will be preserved". And SmartConsole may crash with the "SmartConsole has experienced a serious problem and must close immediately" error. |
|
PRJ-57394, PRHF-29543 |
VSX |
Newly pushed VSX configuration on Maestro may not be synchronized on all Security Group Members, causing DOWN state. |
|
PRJ-54254, PRJ-54255 |
Gaia OS |
When Gaia's backup retention policy is configured with a maximum of one backup or a disk space allocation smaller than the backup file size, the backup process hangs and requires a device reboot. This also may cause the CONFD daemon to exit. |
|
PRJ-54155, PRHF-33439 |
Gaia OS |
When querying VLAN interfaces, instead of returning the ifType specifically for the VLAN interface itself, the SNMP walk returns the ifType of the underlying physical interface that the VLAN is associated with. |
|
PRJ-58164, PRHF-37102 |
Gaia OS |
The ROUTED daemon fails to start when a VTI is configured with a local IP address that matches the next-hop address used in the static route configuration. Refer to sk182848. |
|
PRJ-53604, PRHF-32577 |
Gaia OS |
Capturing with Check Point Traffic Capture Tool (cppcap) from all devices may lead to high CPU usage and potential performance issues. |
|
PRJ-56419, PMTR-107014 |
Gaia OS |
Miscalculation of disk space may cause snapshot to fail. |
|
PRJ-57914, PMTR-86473 |
Gaia OS |
In Gaia Job Scheduler, when running a user-defined command, it may be replaced with " |
|
PRJ-58699, PRHF-37362 |
Gaia OS |
In a Maestro environment with RADIUS users, accessing Maestro Hyperscale Orchestrator (MHO) through Gaia Portal generates the "ERR_EMPTY_RESPONSE" error and triggers a segmentation fault in the httpd2_error_log file, causing the Gaia Portal to go down and prevent users from managing the system through the Gaia Portal. |
|
PRJ-58935, PMTR-102731 |
Gaia OS |
The Gaia Clish command " |
|
PRJ-48288, PRHF-29918 |
QoS |
Security Gateway may have an unexpected behavior when receiving VPN connection QoS outbound flows without assigned interfaces. |
|
PRJ-59310, PRHF-27173 |
VoIP |
High volumes of VoIP/ SIP traffic may trigger a Security Gateway crash. |
|
PRJ-58109, PRJ-57641 |
Scalable Platforms |
Activation of downgraded Security Group members may fail, preventing the rollback process performed using the " |
|
PRJ-56276, PRHF-35335 |
Scalable Platforms |
In CPView and in the output of Gaia Clish commands, the unused PMIC-1 1.2V sensor on the Maestro Orchestrator MHO-175 appliance shows an incorrect reading value. This is a cosmetic issue. |
|
PRJ-58436, PRJ-57507 |
Scalable Platforms |
When running the " |
|
PRJ-56907, PRJ-57105 |
Scalable Platforms |
Configuring a Unique IP Address for Each Standby Chassis (UIPC) may fail. |
|
PRJ-58735, PRJ-58323 |
Scalable Platforms |
In a Maestro environment, a Security Gateway may enter a reboot loop because of sync issues of the settings.fwset file. |
|
PRJ-58345, PRHF-37291 |
Scalable Platforms |
In rare scenarios, the " |
|
PRJ-57472, PRHF-36424 |
Scalable Platforms |
In rare scenarios, Interface Active check may cause a Security Gateway crash when probing a local network. |
|
PRJ-57388, MBS-14520 |
Scalable Platforms |
Using the " |
|
PRJ-48696, PMTR-94043 |
Scalable Platforms |
After upgrade:
|
|
PRJ-46078, PMTR-90934 |
Scalable Platforms |
After a Jumbo Hotfix upgrade a single site is displayed as active, but the assigned load value is 0%. Refer to sk182454. |
|
PRJ-57765, PMTR-106842 |
Scalable Platforms |
Changing the bond mode on Scalable Platform Security Group members may cause a MAC address mismatch on the bond interface due to a reordering of bond subordinate that does not match the database. Refer to sk182488. |
|
PRJ-58960, PRJ-57191 |
Scalable Platforms |
Import an R82 upgrade package may fail with "[ERROR] Failed to transfer package to several members, Import was aborted" because of timeout which occurs while copying the package to all Security Group members. |
|
PRJ-59372, PRHF-38206 |
Scalable Platforms |
VPN tunnels may be disconnected due to an error in processing IKE (Internet Key Exchange) packet flow. |
|
PRJ-56443, PRHF-31476 |
Carrier Security |
When Carrier Security is enabled, GTP-U packets are incorrectly matched against GTP rules instead of a non-GTP UDP rule, causing drops with the "Unestablished tunnel" error. |
|
PRJ-58369 |
IoT Protect |
Removing a member from an IoT-enabled Security Group leaves residual files that prevent IoT processes from starting when this member joins a new Security Group. |
Take 98
Released on 12 February 2025 and declared as Recommended on 19 February 2025
|
ID |
Product |
Description |
|---|---|---|
|
Take 98 - Improvements and Resolved Issues |
||
|
PRJ-59644, PRHF-38332 |
Security Gateway |
Security Gateway may crash when route lookups encounter an unresolved next hop. See Critical Information for R81.20 Jumbo Hotfix Accumulator. |
Take 96
Released on 05 January 2025
|
ID |
Product |
Description |
|---|---|---|
|
Take 96 - New Functionality |
||
|
PRJ-51150, PMTR-90911, PRJ-56796, PMTR-93129 |
Security Management |
NEW: In SmartConsole, the CSV export file of Access Policy NAT rules now contains the hit count data: "Hits", "First Hits" and "Last Hits" columns.
|
|
PRJ-56656, PMTR-92241 |
Security Management |
NEW: The Management API commands " Syntax examples:
|
|
PRJ-56664, PMTR-102617 |
Security Gateway |
NEW: Updatable objects can now be updated through the Security Management Server by adding the " |
|
PRJ-54456, PMTR-103606 |
Gaia OS |
NEW: Added Two-Factor Authentication (2FA) support for Gaia OS login using time-based authenticator apps from Google and Microsoft. Refer to sk181854. |
|
PRJ-52905, PMTR-100688 |
Anti-Bot |
NEW: Added protection that prevents multiple unsuccessful login attempts from Endpoint Security Client users connecting through a Remote Access VPN to the Security Gateway. This protection prevents brute-force attacks on Endpoint Security Client users' passwords. Refer to sk182087. |
|
PRJ-53878, PRJ-54023, PRHF-33261, PRHF-32290 |
Identity Awareness |
NEW: Added new OID (1.3.6.1.4.1.2620.1.38.55) to monitor the Identity Collector connection status in the $CPDIR/lib/snmp/chkpnt.mib file.
|
|
Take 96 - Improvements and Resolved Issues |
||
|
PRJ-57490, PMTR-108994 |
Security Management |
UPDATE: The Management API command " |
|
PRJ-54481, CPDIAG-2743 |
CPView |
UPDATE: Optimized the CPVIEWD daemon, which manages multiple general producers, to reduce CPU spiking and memory consumption. |
|
PRJ-57159, PRJ-57160 |
Logging |
UPDATE: Improved Log Sharing functionality in the Check Point Portal, focusing on core stability and log status accuracy and detail level. |
|
PRJ-51051, ACCESS-613, PMTR-110124 |
SD-WAN |
UPDATE: The Security Gateway now automatically updates the configured application categories in Access Control and SD-WAN Policies with other applications and corresponding port ranges. Refer to sk182790. |
|
PRJ-57923, PMTR-104982 |
SecureXL |
UPDATE: SD-WAN is now supported when SecureXL User Space Mode (UPPAK) is enabled. |
|
PRJ-51225, PRHF-31341 |
Gaia OS |
UPDATE: Implemented robust path validation during user deletion to prevent unintended deletion of parent directories. |
|
PRJ-56455 |
Scalable Platforms |
UPDATE: Maestro Orchestrator Gaia Portal now previews topology changes and summary before applying, improved the error handling. |
|
PRJ-57570, PMTR-93424 |
Scalable Platforms |
UPDATE: Optimized policy distribution to Maestro Security Group members to avoid failure under high load conditions. |
|
PRJ-58356, ODU-2139 |
Automatic Updates - Web SmartConsole |
UPDATE: New features and improvements are released in Take 124 via self-updatable package. Refer to sk170314. |
|
PRJ-58245, ODU-2099 |
Automatic Updates - HCP |
UPDATE: Added Update 20 of HealthCheck Point (HCP) Release. Refer to sk171436. |
|
PRJ-55884, PMTR-106113 |
Security Management |
In some scenarios, the webservices_cmas_ports.conf file is not updated after Domain deletion from the Multi-Domain Security Management Server, and contains ports of deleted Domains. |
|
PRJ-55320, PMTR-104567 |
Security Management |
Packet mode search does not return specific layered rules when an action is defined, unlike searches using only source and destination parameters. |
|
PRJ-57335, PMTR-105173 |
Security Management |
The on-premises Security Management Server with a proxy address configured may fail to connect to the Check Point Portal. |
|
PRJ-57906, PRHF-36295 |
Security Management |
In rare scenarios, the FWM process on the Security Management Server may unexpectedly exit, creating a core dump file. |
|
PRJ-57272, SDWANM-2320, PMTR-108672 |
SmartConsole |
When the Security Management has an additional NAT configuration in the SD-WAN policy (Check Point Portal), an indicating banner may not appear in SmartConsole NAT Rule Base. This is a cosmetic issue.
|
|
PRJ-55714, PMTR-105491 |
Multi-Domain Security Management |
During an upgrade, Global Policy Assignment on Active Domains may fail when performed from the Multi-Domain Security Management Server where the Global Domain is Standby. |
|
PRJ-57530, PRHF-36514 |
Multi-Domain Security Management |
In rare scenarios, in Multi-Domain Security Management environments, login to Smart Console fails. |
|
PRJ-58518, PMTR-110408 |
Logging |
In some scenarios, in Log Servers or Multi-Domain Log Modules (MLM):
|
|
PRJ-56101, PMTR-106586 |
Security Gateway |
The server.log file of the ICAP Server is filled with " |
|
PRJ-56185, PRHF-31197 |
Security Gateway |
When enabling MDPS using the Gaia Clish command " |
|
PRJ-57843, PMTR-109616 |
Security Gateway |
In a rare scenario, when multiple Elephant Flows are running in parallel in the accelerated pipelining path, there may be high CPU utilization. Refer to sk183007. |
|
PRJ-57267, PMTR-108660 |
Security Gateway |
DoS protection and connection rate limiting configurations may fail to effectively enforce rules. |
|
PRJ-56507, PMTR-107344 |
Security Gateway |
When using HTTP/2 through a proxy, the Security Gateway may incorrectly add carriage return and newline characters (\r\n) to the X-Forwarded-For (XFF) header. This causes the header to become invalid and results in a connection failure. This issue only occurs when the Gateway is configured as a proxy. |
|
PRJ-56761, PMTR-107823 |
Security Gateway |
In a rare scenario, the FWK process may exit because of an error occurred in the accelerated pipelined path. |
|
PRJ-58270, PRHF-36963 |
Security Gateway |
Security Gateway with QoS enabled may crash because of a rare race condition. |
|
PRJ-54574, PMTR-103054 |
SD-WAN |
In a DAIP peer environment, traffic outage may occur in SD-WAN during dynamic IP change. |
|
PRJ-57714, PRHF-36800 |
SD-WAN |
In a star community topology, SD-WAN overlay traffic connectivity may be disrupted due to unexpected routing and encryption configurations. |
|
PRJ-57116, SDWANGW-2623 |
SD-WAN |
SD-WAN overlay traffic may experience an outage. |
|
PRJ-50735, PMTR-105178 |
SD-WAN |
In some scenarios, when SD-WAN policy is enabled, open connections are not routed according to the SD-WAN decision. |
|
PRJ-57567, PMTR-109178 |
Internal CA |
In a rare scenario, when running the |
|
PRJ-49857, PRHF-30600 |
Threat Prevention |
In a rare scenario, Anti-Virus Software Blade prevents benign traffic due to improper parsing of URL observables in IoC feeds. Refer to sk181519. |
|
PRJ-57135, PMTR-90069 |
Threat Prevention |
When SSH Deep Packet Inspection (SSH DPI) is enabled, a bypass log entry may not be generated if no Threat Prevention Software Blade is active on the connection. This is a cosmetic issue. |
|
PRJ-58006, PRHF-37011 |
Identity Awareness |
Identity Awareness Captive Portal may not be available after Jumbo Hotfix Accumulator installation or after an upgrade using the Blink image. Refer to sk172324. |
|
PRJ-57853, PMTR-109709 |
Identity Awareness |
Identity Broker Subscriber configured with recalculation of Access Roles does not match all Access Roles after User and Machine are identified. |
|
PRJ-56868, PRHF-35625, PRJ-56872, PRHF-35636 |
Identity Awareness |
In rare scenarios:
Refer to sk182613. |
|
PRJ-56501, PMTR-107149 |
ClusterXL |
Connection to Loopback VIP (Virtual IP) may be dropped. |
|
PRJ-57681, PRHF-36561 |
SecureXL |
A memory leak may occur in the SIM process when using DOS/Rate Limiting rules. |
|
PRJ-56400, PMTR-107175 |
SecureXL |
When modifying MTU settings on LightSpeed Line Card interfaces with SecureXL working in User mode (UPPAK) and not re-enabling both ports immediately after the change, persistent interface binding errors may be printed in the /var/log/usim_x86.elg file, such as " |
|
PRJ-57611, PRHF-36204 |
SecureXL |
In some scenarios, after an update of the OS route configuration, there may be a significant delay in traffic passing through the Security Gateway when SecureXL works in the User space (UPPAK) mode. Refer to sk182740. |
|
PRJ-57800, PMTR-109570 |
SecureXL |
Policy installation failures may cause " |
|
PRJ-57061, PMTR-107742 |
Gaia OS |
SW RAID (RAID-1) fails to resynchronize after formatting one of the SSD drives. This is applicable for these appliances: 15400,15600, 5900, 6800, 16000, 16000T, 26000, 26000T, 6900, 7000, 16200, 28000, QLS250, QLS450, QLS650, QLS800, MLS200, MLS400. |
|
PRJ-46985, PRHF-27944 |
Gaia OS |
When working with SNMP traps, Clish may become slow and unresponsive. |
|
PRJ-56498, PRHF-35416 |
VPN |
There is no audio during the first 5 seconds of each VoIP call. Refer to sk182730. |
|
PRJ-53463, PRHF-31882 |
VPN |
In some scenarios when Link Selection (LS) is configured, traffic outage may occur after policy installation. |
|
PRJ-53944, PMTR-102412 |
VPN |
The IKED daemon may exit during IKEv2 negotiation of SD-WAN with a DAIP peer. |
|
PRJ-53949, PMTR-98528 |
VPN |
In a rare scenario, a memory leak may occur in the VPND process when IKEv2 Remote Access Clients are connected to the Security Gateway. |
|
PRJ-56172, PRHF-35251 |
VPN |
An ECDH object may be deleted before its associated event is completed processing. |
|
PRJ-56914, PRHF-35806 |
VSX |
In SmartConsole, in the Device and License Information view, the Compliance Software Blade license status may incorrectly display "Quota Exceeded" when Virtual Routers or Virtual Switches are present. |
|
PRJ-57058, PRHF-34508 |
VSX |
After a Jumbo Hotfix upgrade, the Mail Transfer Agent may fail on all Virtual Systems except one. See Critical Information for R81.20 Jumbo Hotfix Accumulator. |
|
PRJ-49286, PRHF-30172 |
Harmony Endpoint |
Exclusions for Anti-Bot policy created through the Gaia Portal do not correctly handle Cyrillic characters. |
|
PRJ-58047 |
Scalable Platforms |
During the Jumbo Hotfix Accumulator installation on an R81.20 Security Gateway or when adding a new Security Gateway to the environment, the member's state may experience intermittent flapping. |
|
PRJ-57639, PMTR-100964 |
Scalable Platforms |
Security Group Member may be in Down state during the license distribution to Maestro Security Group members. Refer to sk181245. |
|
PRJ-53749, PRHF-33320 |
Scalable Platforms |
A Maestro Security Group Member may fail to initialize after enabling IPv6 and is stuck with pull_config pnote. |
|
PRJ-57480, PMTR-109043 |
Scalable Platforms |
During a Maestro upgrade, if one of the Security Gateway members becomes unresponsive or enters a DETACH/LOST state, policy installation from SmartConsole fails. |
Take 92
Released on 16 December 2024 and declared as Recommended on 18 December 2024
|
ID |
Product |
Description |
|---|---|---|
|
Take 92 - Improvements and Resolved Issues |
||
|
PRJ-58661, PRJ-58659, PMTR-110556 |
Security Gateway |
In a rare scenario, the FWK process may exit due to a race condition. |
|
PRJ-58591, PMTR-110486 |
SecureXL |
When working with SecureXL in User mode (UPPAK), some CPUs may reach 100% utilization when enabling or disabling debug filters. See Critical Information for R81.20 Jumbo Hotfix Accumulator. |
|
PRJ-57678, PMTR-110104 |
Scalable Platforms |
In a Maestro environment, enabling SecureXL User Mode with non-compatible acceleration cards causes connectivity issues. To restore connectivity, set all members" SecureXL mode to Kernel mode and perform a gradual Security Group reboot. See Critical Information for R81.20 Jumbo Hotfix Accumulator. |
|
PRJ-58622, PRJ-58621 |
Scalable Platforms |
Maestro Gateway enters a boot loop after installation of R81.20 Jumbo Hotfix Accumulator. Refer to sk182894. See Critical Information for R81.20 Jumbo Hotfix Accumulator. |
Take 90
Released on 12 November 2024
|
ID |
Product |
Description |
|---|---|---|
|
Take 90 - New Functionality |
||
|
PRJ-56704, PMTR-102912 |
Security Management |
NEW: Added a new Management API command which shows API usage statistics - " |
|
PRJ-56818, AAD-1761 |
VPN |
NEW: Local SCV settings can be customized by Security Gateway when creating a $FWDIR/conf/local.scv_<GW NAME> file, otherwise the settings fall back to the standard local.scv configuration. |
|
Take 90 - Improvements and Resolved Issues |
||
|
PRJ-56248, PMTR-106894 |
SmartConsole |
UPDATE: Resolved CVE-2024-3596 - Blast-RADIUS attacks. Fix for Remote Access VPN and login to SmartConsole, Mobile Access and Identity Awareness Captive Portal. Refer to sk182516. |
|
PRJ-56082, PMTR-106580 |
Gaia OS |
UPDATE: Check Point response to CVE-2018-20685. Refer to sk65269. |
|
PRJ-56177, PMTR-106774 |
Security Gateway |
UPDATE: Apache HTTPD version was updated from 2.4.55 to 2.4.61 to fix: CVE-2023-31122, CVE-2023-43622, CVE-2024-36387, CVE-2024-38473, CVE-2024-38474, CVE-2024-38475, CVE-2024-38476, CVE-2024-38477, CVE-2024-39573. |
|
PRJ-56882, PMTR-106858 |
Security Management |
UPDATE: JRE is updated from version 8.0_8.21 to version 8.0_8.26. |
|
PRJ-55661, PMTR-105539 |
Security Management |
UPDATE: The Management API command " |
|
PRJ-56611, PMTR-108410 |
Logging |
UPDATE: Added a count of Session and Connection logs to the "cpstat" command output. |
|
PRJ-47655, PRHF-29103 |
Security Gateway |
UPDATE: Added ability to increase/decrease DNS cache table size. |
|
PRJ-51951, PRHF-31203 |
Security Gateway |
UPDATE: Added support for log rotation in the avi_del_tmp_files.elg files. Refer to sk113241. |
|
PRJ-56698 |
SD-WAN |
UPDATE: Improved the performance and scalability in SD-WAN Monitoring. |
|
PRJ-48031, PRHF-29471 |
Threat Emulation |
UPDATE: The maximum size for files uploaded to Threat Emulation can now be configured using the Threat Emulation API. Set the "max_api_request_data_size" attribute to specify the new limit. |
|
PRJ-49053, PRHF-30097 |
Identity Awareness |
UPDATE: Identity Collector OIDs for SNMP queries are now available in both $CPDIR/lib/snmp/chkpnt.mib and $FWDIR/conf/identity_server.cps files. |
|
PRJ-57065, PRHF-34509 |
SecureXL |
UPDATE:
|
|
PRJ-56483, PMTR-107320 |
SecureXL |
UPDATE: Improved throughput of GRE tunnels configured on the ports of the 100G Acceleration Card when SecureXL works in the KPPAK mode. |
|
PRJ-57757, PRJ-58096, ODU-2107, ODU-2083 |
Automatic Updates - Web SmartConsole |
UPDATE: New features and improvements are released in Take 121 and Take 123 via self-updatable package. Refer to sk170314. |
|
PRJ-57327, ODU-1979 |
Automatic Updates - HCP |
UPDATE: Added Update 19 of HealthCheck Point (HCP) Release. Refer to sk171436. |
|
PRJ-57439, ODU-1971 |
Automatic Updates - Threat Extraction |
UPDATE: Added Update 15 of Threat Extraction Engine. Refer to sk165832. |
|
PRJ-57705, ODU-2027 |
Automatic Updates - CPView |
UPDATE: Added Take 97 of CPotelcol (OpenTelemetry Collector) Release Updates. Refer to sk180522. |
|
PRJ-57709, ODU-1995 |
Automatic Updates - CPView |
UPDATE: Added Take 40 of CPviewExporter Release Updates. Refer to sk180521. |
|
PRJ-56509, PMTR-106245 |
Security Management |
In some scenarios, the Security Management Server upgrade fails with "creating default objects and restarting services" during the import phase.
|
|
PRJ-56165, PMTR-106542 |
Security Management |
In some scenarios, the Management API command " |
|
PRJ-53260, PRHF-32595 |
Security Management |
When exporting a policy to a CSV file, the process fails silently if any rule within the policy has a name or comment in UID format. No clear error message is provided to indicate the cause of the failure. |
|
PRJ-56614, PRHF-35520 |
Security Management |
An administrator whose authentication method was changed from "Check Point Password" to a different method in R77.X can still log in using their original Check Point password. |
|
PRJ-50036, PRHF-30712 |
Security Management |
The Management API command " |
|
PRJ-55669, PRHF-34447 |
Security Management |
Adding a host object to a network group using the Management API command " |
|
PRJ-52760, PRHF-32246 |
Security Management |
Audit logs may not be generated when changes are made to an inline (shared) layer that appears multiple times within the same policy. |
|
PRJ-56763, PMTR-105923 |
Security Management |
SmartConsole may get disconnected when installing a policy on more than five hundred targets. |
|
PRJ-57073, PRHF-35818 |
Security Management |
In rare scenarios, when exporting policy hitcounts to CSV format, the "Hitcount" column may appear blank in the exported file. |
|
PRJ-55832, PRHF-34199 |
Security Management |
Global Policy Reassignment may fail with an "An internal error has occurred" message when a custom IPS package is used or was previously used in the system. |
|
PRJ-54296, PRHF-25950 |
Security Management |
The Database Installation progress bar may not update during task execution. |
|
PRJ-56028, PRHF-35019 |
Security Management |
When exporting a policy to CSV with hitcount enabled, if the hitcount timeframe is set to anything other than "All", the "Hitcount" column in the CSV file may appear blank. |
|
PRJ-55690, PRHF-34236 |
Security Management |
Searching for a Data Center asset IP address in the policy may not return results. |
|
PRJ-52454, PRHF-28597 |
Security Management |
In some scenarios, Access Control policy verification is stuck at 40 percent. |
|
PRJ-46463, PRHF-28817 |
Security Management |
In some scenarios, policy installation using the Management API command with the " |
|
PRJ-46235, PRHF-28814 |
Security Management |
Changing the main URL of the UserCheck Portal using the Management API command " |
|
PRJ-54720, PRHF-33889 |
Security Management |
In rare scenarios, when Application Control Software Blade is enabled, cloning a policy may fail due to timeout. |
|
PRJ-54659, PRHF-33941 |
Security Management |
Several Management API commands, such as " |
|
PRJ-52757, PMTR-99312 |
Multi-Domain Security Management |
Enabling IPS on Multi-Domain Security Management Server may cause Threat Prevention policy installations to fail due to legacy IPS multi-profile incompatibility. |
|
PRJ-56541, PRHF-34752 |
Multi-Domain Security Management |
In some scenarios, in a Multi-Domain Security Management environment, the Hit Count retention mechanism may not remove the Hit Count data from all the Domains. |
|
PRJ-55787, PRHF-34686 |
Multi-Domain Security Management |
Global Domain Assignment fails with an "Internal Error" message when performed on a Multi-Domain Security Management Server containing over 32,000 revisions. |
|
PRJ-55705, PRHF-34013 |
Multi-Domain Security Management |
In rare scenarios, objects are missing from the Gateways & Servers view on the Multi-Domain Security Management level. Refer to sk182641. |
|
PRJ-53994, PRHF-33263 |
Multi-Domain Security Management |
In some scenarios, Domain deletion may fail with a "delete domain failed: null" message. |
|
PRJ-55932, PRHF-34218 |
Multi-Domain Security Management |
In rare scenarios, login to a Domain from the System Domain in Smart Console fails with "Login to the Domain domainName failed. Try again, or connect directly to the Domain using its IP addressdomainIp". |
|
PRJ-56531, PRHF-35418 |
Multi-Domain Security Management |
The Multi-Domain Security Management Server experiences high CPU usage when communicating with the Multi-Domain Log Server. And the cpm.elg log prints the "You have reached the maximum number of active session" error. Refer to sk182738. |
|
PRJ-56712, PRHF-35700 |
Multi-Domain Security Management |
In some scenarios, cpmiquerybin core files may appear in /var/log/dump/usermode/ on the Security Management Server. |
|
PRJ-47879, PRHF-24029 |
SmartConsole |
The Management API command " |
|
PRJ-57309, MCFG-666 |
SmartConsole |
SmartConsole fails to connect with "Unable to connect to server. Server is initializing". Refer to sk182507. |
|
PRJ-57421, PMTR-107206 |
SmartConsole |
In some scenarios, opening new tab in SmartConsole Logging & Monitoring tab fails with "HTTP error 500 - problem accessing smartview/embedded. Reason: Server Error". Refer to sk182732. |
|
PRJ-50432, PRHF-30878 |
Logging |
In rare scenarios, CPU consumption on the Security Management Server is high and logs are not displayed. |
|
PRJ-51694, PRHF-31777 |
Logging |
In some scenarios, after removing an existing Log Exporter instance, the creation of a new instance appears successful in SmartConsole. However, the new Log Exporter object is not actually generated. |
|
PRJ-56644, PMTR-107570 |
Security Gateway |
In rare scenarios, the FWK process may unexpectedly exit when the IPS / Application Control / Anti-Virus / Anti-Bot Software Blade is active and the HyperFlow feature is enabled. |
|
PRJ-56732, PMTR-107546 |
Security Gateway |
The "asg monitor" command may show the Security Gateway in the "during upgrade" state although a major downgrade is complete. |
|
PRJ-54070, PRHF-33254 |
Security Gateway |
Changing the NAT settings of a host using the Management API command " |
|
PRJ-56701, PRHF-35624 |
Security Gateway |
Anti-Spoofing may drop IPv6 traffic that arrives at an interface with an IPv6 address configured. Refer to sk182725. |
|
PRJ-57351, PRJ-57352 |
Security Gateway |
When SecureXL User Mode (UPPAK) is enabled and using Passive/Active Streaming with QoS, the Security Gateway may incorrectly drop some traffic. |
|
PRJ-57254, PMTR-107381 |
Security Gateway |
In some scenarios, the Security Gateway does not free some packets causing a memory leak. |
|
PRJ-54119, PRHF-33299 |
Security Gateway |
In a rare scenario, the FWK process may exit when cluster connection synchronization fails. |
|
PRJ-56722, PMTR-107648 |
Security Gateway |
The Security Gateway may crash during large memory allocation operations in specific applications. |
|
PRJ-57371, PMTR-97905 |
Security Gateway |
When adding a new Virtual System, a CPD core dump file may be generated. |
|
PRJ-53810, PRHF-33037 |
Security Gateway |
The Security Gateway may crash after a failure in policy installation. |
|
PRJ-58099, PMTR-109857 |
Security Gateway |
Traffic through specific interfaces is dropped when the QoS Software Blade is active and "ISP redundancy-LS" is configured. Refer to sk182807. See Critical Information for R81.20 Jumbo Hotfix Accumulator. |
|
PRJ-57097, PRHF-36117 |
SD-WAN |
In a rare scenario, when SD-WAN transport is incorrectly marked as "UP" despite its underlying ISP interface is "DOWN", traffic fails to reach the remote peer because of incorrect routing decisions. |
|
PRJ-57115, PRHF-31189 |
Threat Prevention |
Threat Prevention policy installation may fail because of invalid JSON format in the IoC feed feature configuration file. Refer to sk181650. |
|
PRJ-57667, PMTR-100232 |
Threat Prevention |
The Threat Prevention policy installation may fail when installing from R81.20 SmartConsole on R80.x Security Gateway. |
|
PRJ-55888, PMTR-106443 |
Threat Prevention |
In some scenarios, when loading large IoC IP feeds, policy installation may fail with "Installation failed. Reason: Policy install commit function was unsuccessful due to timeout" because of a large IP addresses list. |
|
PRJ-55377, PRHF-33771 |
Threat Prevention |
In some scenarios, the TPD daemon may cause high CPU usage because of a large amount of logs. |
|
PRJ-56328, MBS-18307 |
Threat Prevention |
In a rare scenario, the Security Gateway may crash during traffic inspection when holding a connection. |
|
PRJ-50243, PMTR-83242 |
Threat Prevention |
In a rare scenario, Anti-Bot and Anti-Virus packages may be seen as not updated in SmartConsole, even though the packages are updated. |
|
PRJ-57006, PRHF-35823 |
Threat Prevention |
In some scenarios, when Zero Phishing is enabled, kernel crash may occur. |
|
PRJ-53590, PRHF-32655 |
Identity Awareness |
In Azure Active Directory, access role assignment only considers a user's first 100 group memberships. Any groups beyond this limit are disregarded when determining user access roles. |
|
PRJ-56360, PMTR-100177 |
Application Control |
The fwk.elg file may be flooded with the "DNS_DATA_SOURCE failed on context 201, executing context 366 exception" messages. Refer to sk182606. |
|
PRJ-54431, PRHF-33644 |
IPS |
In a rare scenario, when IPS is enabled and logging on a rule that involves IPS is enabled, physical memory usage may rapidly increase. |
|
PRJ-56624, PMTR-107215 |
IPS |
IPS may drop an IPv6 TCP local connection. |
|
PRJ-53833, PRHF-33038 |
Anti-Virus |
When Anti-Virus is enabled, in a rare scenario, a memory leak in the FWK process may occur on the Security Gateway. |
|
PRJ-56717, PMTR-107773 |
Anti-Virus |
High volumes of simultaneous requests for the same domain or URL may cause Anti-Virus Software Blades to put excessive load on the RAD daemon, leading to increased latency. |
|
PRJ-56042, PRHF-34907 |
Anti-Virus |
In some scenarios, the Anti-Virus Software Blade logs on a VSX Gateway may display an incorrect origin IP address. |
|
PRJ-55984, PRHF-36838, PRHF-35476 |
Anti-Virus |
Anti-Virus may execute unnecessary load_sigs when loading external IoC feeds. |
|
PRJ-58112, PMTR-102962 |
ClusterXL |
VSX Cluster Members with VLAN interfaces change their cluster state to "Down" and "Active!" after installing the R81.20 Jumbo Hotfix Accumulator Take 89. Refer to sk182819. See Critical Information for R81.20 Jumbo Hotfix Accumulator. |
|
PRJ-56599, PMTR-107557,PRHF-35772 |
SecureXL |
IPX traffic over the interface in Bridge Mode working in SecureXL User Mode (UPPAK) may be dropped. Refer to sk182623. |
|
PRJ-56480, PMTR-107271 |
SecureXL |
In some scenarios, the VSX cluster can take extra time to boot up and activate the Virtual Systems. |
|
PRJ-57488, PMTR-105824 |
SecureXL |
When working with Jumbo Frames in SecureXL User Mode (UPPAK) on Check Point Firewall 9000 series appliances, incorrect memory allocation calculations may cause intermittent link failures. Refer to sk182825. |
|
PRJ-57430, PRHF-36137 |
SecureXL |
When SecureXL User Mode (UPPAK) is enabled and running ESP traffic, packet loss may occur and the "fwconn_key_init_links failed" error is printed. Refer sk182775. |
|
PRJ-56828, PMTR-107903 |
SecureXL |
The USIM process may occur if CPView stats are collected during the "cpstop" operation for VSX. |
|
PRJ-57001, PMTR-108133, PRJ-57252, PMTR-102529, PRJ-57250, PMTR-98868 |
SecureXL |
In some scenarios, the Security Gateway may crash when SecureXL User Mode (UPPAK) is enabled. |
|
PRJ-57464, PRJ-57428 |
SecureXL |
In some scenarios during low TCP traffic, there is high CPU usage when SecureXL User Mode (UPPAK) is enabled. |
|
PRJ-57614, PMTR-109276 |
SecureXL |
The USIM process may unexpectedly exit when these parameters are enabled in the $PPKDIR/conf/simkern.conf file:
|
|
PRJ-56945, PRHF-35953 |
SecureXL |
The USIM process exits when attempting to delete an IP address from an empty deny list if that IP address exists in any other deny lists (including the regular deny list or those using IoC feeds). |
|
PRJ-56904, PMTR-108071 |
Routing |
The ROUTED daemon may exit with a core dump during a BGP or OSPF restart. |
|
PRJ-56525, PMTR-101893 |
Routing |
In a ClusterXL environment, a race condition may occur when BGP Graceful Restart is incorrectly configured. If the feature is enabled for some peers but not others, it may lead to permanent loss of network routes. |
|
PRJ-49210, PRHF-30241 |
VPN |
Remote Desktop Protocol (RDP) connections may frequently disconnect when network traffic is routed through a combination of medium path, Quality of Service (QoS) controls, and VPN. |
|
PRJ-52893, PMTR-100703 |
VPN |
The FWK process may exit when Monitor mode is enabled on one of the interfaces. |
|
PRJ-51351, PRHF-31438 |
VPN |
Remote Access VPN connections in Maestro environments may be dropped with the "out-of-state" reason. |
|
PRJ-50157, PMTR-93643 |
VPN |
When working with iOS devices, after establishing a VPN connection and subsequently disconnecting devices, the "vpn tu tlist" command may display an incorrect device connection status, indicating that a device is still connected. |
|
PRJ-55887, PMTR-106172 |
VSX |
Deleting a Virtual System ID (VSID) that does not exist may trigger the "cpstop" command. Stopping all Check Point services on VS0 can disrupt the entire VSX environment. |
|
PRJ-57814, PRHF-17665 |
VSX |
Multi-Queue configuration does not survive reboot on VSX. Refer to sk173950. |
|
PRJ-56480, PMTR-107271 |
VSX |
In some scenarios, the VSX cluster can take extra time to boot up and activate the Virtual Systems. |
|
PRJ-52908, PRHF-32420 |
Gaia OS |
In some scenarios when MDPS is enabled, the "Loading kernel module for a network device with CAP_SYS_MODULE (deprecated). Use CAP_NET_ADMIN and alias netdev-eth7 instead" message appears in /var/log/messages. |
|
PRJ-54462, PRHF-33758 |
Gaia OS |
Traffic from a Host behind a Virtual System in a VSX Cluster / Scalable Platform Security Group in the VSX mode does not reach the destination. Refer to sk180441. |
|
PRJ-55374, PRHF-34122 |
Gaia OS |
Running the "snmpwalk" command on OID .1.3.6.1.4.1.2620.1.6.23 causes snmpwalk on OID 1.3.6.1.4.1.2620.1.6.7.6.1 to show wrong output. Refer to sk182315. |
|
PRJ-55306, PRHF-32694 |
Gaia OS |
The "cpviewd: unable to read from gpio_nuvoton driver module. snmpd: unable to read from gpio_nuvoton driver module" messages may be printed in /var/log/messages. |
|
PRJ-56121, PRHF-35200 |
Gaia OS |
There may be a memory leak in the CONFD process or the CONFD process may exit, and the "Unable to connect to the server, Press OK to reconnect" error is displayed when opening the Network Interfaces tab in the Gaia Portal. Refer to sk182560. |
|
PRJ-56054, PRHF-35042 |
Gaia OS |
Adding multiple VPN tunnels via Clish in Transaction Mode fails, while adding them individually succeeds. |
|
PRJ-56874, EPS-57790 |
Harmony Endpoint |
During patch deployment in Posture Management, attempting to patch multiple systems for a specific application using the "Group By Application" option fails with the "Failed to Start Patching Process" error. |
|
PRJ-57132, PMTR-105660 |
Harmony Endpoint |
The $UEPMDIR/engine/uepm-jms-data directory size can increase because queued requests get accumulated on the Server. |
|
PRJ-55684, PRHF-34515 |
Smart-1 Cloud |
When creating multiple Interoperable Devices with dynamic IP addresses, the duplicate IP addresses may be assigned to Interoperable Devices. Refer to sk181834. |
|
PRJ-44697, PRHF-27834 |
Scalable Platforms |
When running the "asg resource" command, the SSD overall health check is displayed as "PASSED" with the "Unknown_Attribute on Member X_XX is below/getting towards low threshold (val: 0/ thresh: 0)" warning. The issue is cosmetic only. |
|
PRJ-56368, MBS-18304 |
Scalable Platforms |
The VSX Gateway may cause traffic interruption when SecureXL User Mode (UPPAK) is enabled on systems with multiple physical interfaces. |
|
PRJ-56969, PRJ-56967 |
Scalable Platforms |
After upgrade on Maestro and Scalable Chassis, when working in SecureXL User Mode (UPPAK), policy installation may fail. |
|
PRJ-55429, PRHF-34170 |
Scalable Platforms |
Disabling the Maestro Fastforward feature may result in an error. |
|
PRJ-48867, PMTR-87890 |
Scalable Platforms |
Using Image Cloning when the same VMAC feature is enabled may cause a boot loop. |
|
PRJ-46194, PRHF-28141 |
Scalable Platforms |
In a Maestro environment, when MDPS is enabled, the "asg if --diag" command reports the "no files matched glob pattern "/sys/class/net/BPEth*/operstate" error. |
|
PRJ-56460 |
IoT Protect |
Nano-Agent may not run in a Multi-Domain Security Management environment after using the "mdsstop ; mdsstart" command. |
Take 89
Released on 06 October 2024 and declared as Recommended on 28 October 2024
|
ID |
Product |
Description |
|---|---|---|
|
Take 89 - New Functionality |
||
|
PRJ-55547, PMTR-104635 |
SmartProvisioning |
NEW: Added a new " |
|
PRJ-53065, PMTR-101214 |
Identity Awareness |
NEW: This upgrade introduces three important SAML Authentication enhancements:
Administrators gain more control over security policies, while the system becomes more adaptable to various high-security environments and Identity Provider requirements. |
|
PRJ-56616 |
SD-WAN |
NEW: In SD-WAN, added support for:
|
|
PRJ-56237, MBS-17283 |
Scalable Platforms |
NEW: Added support for these features in Maestro Security Groups:
Applies only to these appliance models:
|
|
Take 89 - Improvements and Resolved Issues |
||
|
PRJ-52882 |
SD-WAN |
UPDATE: When Security Management disconnects from the cloud via the Infinity Services tab in SmartConsole, agents now automatically disconnect as well. Refer to sk180557. |
|
PRJ-54683, PMTR-104266 |
Mobile Access |
UPDATE: Resolved CVE-2024-31497. The Putty version used in the Mobile Access Portal Embedded SSL Network Extender application is upgraded from version 0.80 to version 0.81. |
|
PRJ-56336, PMTR-107058 |
Gaia OS |
UPDATE: Resolved CVE-2024-3596 - Blast-RADIUS attacks for Gaia Portal and Gaia Clish. Refer to sk182516. |
|
PRJ-54420, PRHF-33584 |
Security Management |
UPDATE: Policy installation duration with hundreds of layers is improved by approximately 30%. |
|
PRJ-50774, PRHF-30910 |
Logging |
UPDATE: Port 8211 now accepts connections with the cipher ECDHE_RSA_AES_256_GCM_SHA384. |
|
PRJ-54499, PRHF-33612 |
Security Gateway |
UPDATE: Optimized the Generic Data Center JSON file processing on the Security Gateways to improve performance when handling large numbers of IP ranges. |
|
PRJ-54138, PMTR-103001 |
SSL Inspection |
UPDATE: Added a log for connections rejected because of short Server certificate public key size (RSA 1024 bits or less, ECDSA 256 bits or less). Refer to sk182224. |
|
PRJ-55747, PMTR-104855 |
Threat Prevention |
UPDATE: Added the " Syntax example: " |
|
PRJ-56681, PRJ-57027, PRJ-57263, ODU-2035, ODU-2019, ODU-1955 |
Automatic Updates - Web SmartConsole |
UPDATE: New features and improvements are released in Take 118, Take 119, Take 120 via self-updatable package. Refer to sk170314. |
|
PRJ-51503, PRHF-31420 |
Security Management |
In rare scenarios, an upgrade of a Multi-Domain Security Management Server fails with "Cancelled due to a failure in other domain" in the upgrade report.
|
|
PRJ-56003, PRHF-34871 |
Security Management |
In rare scenarios, the FWM process on the Security Management Server may unexpectedly exit, creating a core dump file. |
|
PRJ-55934, PRHF-34584 |
Security Management |
In rare scenarios, login to SmartConsole fails with a timeout. |
|
PRJ-55332, PRHF-34049 |
Security Management |
If the $FWDIR/conf/fwm.adtlog file is not valid, the FWM process leaves unused file descriptors, which may affect the Security Management Server performance. |
|
PRJ-55447, PRHF-33832 |
Security Management |
If any single Data Center fails to register, the registration of all Data Center assets to the Security Management Server also fails. |
|
PRJ-55929, PRHF-34912 |
Security Management |
The Revisions Purge process may stall if initiated after restarting the Security Management Server or Multi-Domain Security Management Server because of remnants of a previously interrupted Revisions Purge operation. |
|
PRJ-56153, PRHF-35121 |
Security Management |
In rare scenarios, the Revisions tab in SmartConsole shows "Error retrieving results". |
|
PRJ-56212, PRHF-35143 |
Security Management |
The database size on the Secondary Management Server increases if |
|
PRJ-55798, PRHF-34671 |
Security Management |
SmartConsole may close during login because of repeated attempts to discard a non-existent work session. |
|
PRJ-55444, PRHF-34146 |
Security Management |
Accelerated Policy installation may get stuck with the "Policy installation (queued)" status. |
|
PRJ-55335, PRHF-33993 |
Security Management |
In rare scenarios, login to SmartView web application using the Domain IP address or Domain name fails. |
|
PRJ-52058, PRHF-31798 |
Security Management |
In a Management High Availability environment, the Standby Security Management Server may not update the "Installation date" during policy installation on Security Gateways/Clusters. |
|
PRJ-54734, PRHF-33948 |
Security Management |
In rare scenarios, the CPD process may unexpectedly exit and create a core dump file. |
|
PRJ-57031, PRHF-30884 |
Security Management |
Log queries fail with the error "Problems have occurred during search" when Domain migration is in progress. This occurs specifically during the execution of the Management API commands " |
|
PRJ-54507, PMTR-102800 |
Multi-Domain Security Management |
Global Domain Assignment may fail with "Internal Error", if the assigned Domain is currently Active on a different Multi-Domain Security Management Server. |
|
PRJ-42135, PRHF-25935 |
CPView |
In a rare scenario, when running the CPView utility, the Security Gateway may crash. |
|
PRJ-54064, PMTR-102780 |
Logging |
In rare scenarios, the CPSEMD process on the SmartEvent Server may unexpectedly exit, creating a core dump file. |
|
PRJ-44900, PRHF-24639 |
Logging |
In rare scenarios, the Logs view may display unexpected blank lines or gaps in the chronological sequence of entries. |
|
PRJ-53219, PRHF-32587 |
Logging |
When adding a table widget to a SmartView report:
|
|
PRJ-46849, PRJ-46579 |
Logging |
RAD error messages may be printed to the $FWDIR/log/fwk.elg file during the " |
|
PRJ-50613, PRHF-29955 |
Logging |
The FWD process may exit and cause issues with opening packet capture files on remote members. |
|
PRJ-48772, PRHF-30060 |
Logging |
The Management API command " |
|
PRJ-46890, PRHF-29024 |
Security Gateway |
Incorrect value in the " |
|
PRJ-54415, PRHF-33710 |
Security Gateway |
In a VSX Cluster environment, the CPVIEWD daemon may cause a high CPU. |
|
PRJ-55579, PMTR-104837 |
Security Gateway |
A buffer overflow may occur in the HTTP flow, affecting the FWK process. |
|
PRJ-45951, PRHF-28371 |
Security Gateway |
During policy installation, Rule Base internal error drops may be shown in the SmartConsole logs. Logs related to "dynobjs" may be printed in Messages. |
|
PRJ-57108, PRHF-36116 |
Security Gateway |
Memory leak may occur in SecureXL templates. Refer to sk182648. See Critical Information for R81.20 Jumbo Hotfix Accumulator. |
|
PRJ-55803, PRHF-34726 |
Security Gateway |
The Security Gateway may fail to resolve external Network Feeds whose URL contains a port number (such as " |
|
PRJ-52411, PRHF-31919 |
Security Gateway |
The PDPD process memory consumption may be high when using an Azure AD object. |
|
PRJ-53636, PMTR-101538 |
Security Gateway |
In a Maestro Security Group using VSX mode with diverse appliance models and active dynamic balancing, DSD pnotes may appear on member devices and cause a failover from an SMO member. This occurs when the default number of FWK instances on these members differs from the SMO default setting. |
|
PRJ-48105, PRHF-29616 |
Security Gateway |
Outages may occur when the FWD process exits or restarts and Security Group member goes down triggering Scalable Chassis failover. |
|
PRJ-53543, PRHF-32797 |
Threat Prevention |
In some scenarios, an external IoC may not be enforced on Sub-domains of a Domain that is listed in the feed. |
|
PRJ-56096, PMTR-106568 |
Threat Prevention |
SSH Deep Packet Inspection (SSH DPI) fails to start inspection if IPS is enabled while all other Threat Prevention products are disabled. |
|
PRJ-55989, PMTR-104285 |
Threat Prevention |
In a rare scenario, Threat Prevention policy installation may fail after an over-the-air (OTA) package update of TP_CONF_SERVICE. Refer to sk182572. |
|
PRJ-55763, PMTR-104381 |
Threat Prevention |
In rare scenarios, policy installation may fail after an upgrade of a VSX Gateway. |
|
PRJ-46349, PRHF-27721 |
Threat Emulation |
The ICAP client may send the file name in "Content-Disposition" in an unsupported format written as |
|
PRJ-51492, PRHF-31582 |
Threat Emulation |
When using ICAP, filename handling occasionally fails. As a result, the Threat Emulation Software Blade may not be able to process this specific file. |
|
PRJ-51606, PMTR-98865 |
Identity Awareness |
In a rare scenario, the PDPD process on Security Gateway with configured Identity Broker may become unresponsive while processing identity updates. Refer to sk182635. |
|
PRJ-54326, PRHF-33541 |
Identity Awareness |
In rare scenarios, while handling new connection, the PDPD process can become unresponsive. Refer to sk182220. |
|
PRJ-55437, PRHF-31271 |
Application Control |
APPI tenant restriction may not function as expected when the application is not included in the policy or when no extended logging is enabled. |
|
PRJ-55460, PRHF-34098 |
URL Filtering |
In scenarios where there is a heavy load on the machine, the RAD queue can fill up and get clogged by unhandled requests, causing an outage and traffic disruption. |
|
PRJ-54192 PRHF-31001 |
Anti-Bot |
The Anti-Bot Software Blade may generate error logs with the "Failed to Decrypt CP Site Response" reason. Refer to sk182494. |
|
PRJ-54445, PMTR-103889 |
Mobile Access |
HTTPS access to the Mobile Access Portal may be down. |
|
PRJ-56222, PRHF-35271 |
Mobile Access |
The " |
|
PRJ-55634, PRHF-27989 |
ClusterXL |
After modifying a bond, the Monitored VLANs may disappear. Refer to sk180724. |
|
PRJ-55955, PMTR-105602 |
SecureXL |
The Security Gateway may crash in Bridge mode or in Non-Bridge mode when the number of MAC addresses in its network interface card's table exceeds the hardware capacity limit. Refer to sk182813. |
|
PRJ-56061, PRHF-34672 |
SecureXL |
When attempting to set a MAC address for a VXLAN interface using Clish, Clish displays a warning message and prevents the MAC address from being set. |
|
PRJ-56367, PRHF-35417 |
SecureXL |
After installation with Gaia Fast Deployment (Blink), SecureXL User Mode (UPPAK) becomes disabled. |
|
PRJ-56011, PRHF-34987 |
SecureXL |
In a rare scenario, a memory leak in the adp kernel module may occur during multicast routing assert failures. |
|
PRJ-51111, PMTR-97788 |
SecureXL |
SYN Defender configuration in Inspection Settings on the Security Management Server may not be applied on Accelerated Policy installation. |
|
PRJ-56433, PMTR-107256 |
Routing |
Dynamic Routing outage in a Security Group during the Zero Downtime (MVC) Upgrade to R81.20, during the Downgrade from R81.20, or during the installation / uninstall of the R81.20 JumboHotfix Accumulator. Refer to sk182556. |
|
PRJ-54408, PRHF-33153 |
Routing |
A multicast outage may occur after a failover triggered by incomplete processing of cluster synchronization messages. |
|
PRJ-53175, PMTR-101331 |
Routing |
Graceful Restart may end prematurely in OSPF NSSA areas. |
|
PRJ-53828, PMTR-95640 |
Routing |
A multicast outage may occur during failovers caused by interface flaps. |
|
PRJ-53315, PMTR-101682 |
VPN |
The " |
|
PRJ-50090, PMTR-90101 |
VPN |
By default, the VPN permanent tunnel is configured to use "tunnel test" instead of "DPD". This configuration may cause inaccurate permanent tunnel status reporting when connecting to third-party devices. |
|
PRJ-54547, PMTR-104228 |
VPN |
BGP peering over Route-based VPN may fail because Azure cluster members use their own IP address as source instead of the Virtual IP address, preventing proper routing protocol establishment. |
|
PRJ-56673, PRHF-35637 |
VSX |
Memory corruption occurs when a bond interface is configured, leading to a Security Gateway crash with a vmcore or a boot loop. |
|
PRJ-57426, PRHF-36390 |
Scalable Platforms |
In a Maestro environment with the " See Critical Information for R81.20 Jumbo Hotfix Accumulator. |
|
PRJ-53310, PMTR-95877 |
Scalable Platforms |
In Maestro / Scalable Chassis environments, when using the Threat Prevention Software Blade in the Security Group, the entitlement_status_collector_db.C files may be inconsistent between the Security Group Members. |
|
PRJ-51192, PRHF-29670 |
Scalable Platforms |
Security Group Member in a VSX environment is in a boot loop after creating a new Virtual System with a WRP interface. Refer to sk182476. |
|
PRJ-56115 |
IoT Protect |
After a Multi-Domain Security Management Server upgrade, the Domain configuration file iot-on-board.conf is not saved. |
Take 84
Released on 05 September 2024 and declared as Recommended on 18 September 2024
|
ID |
Product |
Description |
|---|---|---|
|
Take 84 - Improvements and Resolved Issues |
||
|
PRJ-56890, PRHF-34283 |
Security Management |
See Critical Information for R81.20 Jumbo Hotfix Accumulator. |
|
PRJ-56890, PRHF-34283 |
Logging |
Suspicious Activity Monitoring (SAM) rules may not be triggered after a Source Block automatic reaction is configured. |
|
PRJ-57070, SDWANGW-3025 |
SD-WAN |
When working in Firewall Kernel Space Mode (KSFW), SD-WAN policy installation may fail with "Failed to enforce new policy. Reason: Failed to lower support_fec flag(Return code: 10)". |
|
PRJ-56932 |
CloudGuard Network |
After an upgrade, the incorrect status of the CloudGuard Controller is displayed in SmartConsole: "Error: "CloudGuard Controller" is not responding. Verify that "CloudGuard Controller" is installed on the gateway". Refer to sk182622. |
Take 79
Released on 19 August 2024
|
ID |
Product |
Description |
|---|---|---|
|
Take 79 - New Functionality |
||
|
PRJ-53640, PMTR-102064 |
Security Management |
NEW: Added the ability to unset a persistent environment variable, using the " |
|
PRJ-54715, PMTR-103677 |
Security Management |
NEW: Automatic refresh of SmartConsole views after Global Policy Assignment on a Multi-Domain Security Management Server. To enable this ability, refer to sk182307. |
|
PRJ-53464 |
SD-WAN |
NEW:
|
|
PRJ-53477, CLUS-1936 |
Scalable Platforms |
NEW: Added Generic Data Center support in Maestro Security Groups. |
|
Take 79 - Improvements and Resolved Issues |
||
|
PRJ-50857, PMTR-97312 |
Security Gateway |
UPDATE: Apache HTTPD version was updated from 2.4.55 to 2.4.58 to fix CVE-2023-31122 and CVE-2023-43622. |
|
PRJ-50924, PMTR-97400 |
Security Gateway |
UPDATE: Deprecated RC2-CBC cipher for SIC in OpenSSL. |
|
PRJ-55316, PMTR-104507 |
Gaia OS |
UPDATE: A patch on top of OpenSSL 1.1.1w to fix CVE-2024-2511. Refer to sk182320. |
|
PRJ-56226, PMTR-106852 |
Gaia OS |
UPDATE: Added a defense mechanism against malicious code injections through special HTTP requests. Resolved CVE-2024-24914. Refer to sk182743. |
|
PRJ-54496, PMTR-104054 |
Security Management |
UPDATE: JRE is updated from version 8.0_8.10 to version 8.0_8.21. |
|
PRJ-50381, PRHF-30774 |
Security Management |
UPDATE: Various Web Portals on the Security Management Server (for example, Web SmartConsole, SmartView) no longer accept HTTPS connections to ports 443 and 19009 with specific TLS 1.2 ciphers. Refer to sk181879. |
|
PRJ-53605, PMTR-102275 |
Security Management |
UPDATE: Modified the content of the |
|
PRJ-53954, PMTR-103052 |
Security Management |
UPDATE: Changed the hardware name "1570R Appliances" to "1570R/1575R Appliances" in the Security Gateway editor in SmartConsole and SmartProvisioning.
|
|
PRJ-52932, PRHF-32414 |
Security Management |
UPDATE: When deleting a Secondary Multi-Domain Security Management Server, SmartConsole now shows an "After MDS '<MDS name>' is deleted, you should delete the Secondary Domain Servers from the Domains and revoke their certificates" message. |
|
PRJ-52404, PMTR-99617 |
Security Management |
UPDATE: Added SHA256 fingerprints to certificate objects to mitigate the risk of hash collisions and enhance trust when utilizing the fingerprint, encoded with English words, as a verification mechanism. |
|
PRJ-52954, PMTR-101078 |
Logging |
UPDATE: Enhanced the Access Control log for "Accept" actions with initial matched layers of "IoT" or "Playblocks": The "Layer Name" field now shows the admin-configured layer, alongside Rule Name and Rule Number, allowing administrators to view their preferred match layer rather than defaulting to the first matched layer or inline rule. This change improves visibility into the specific security policy components responsible for accepting traffic. |
|
PRJ-55290, PMTR-104620 |
Security Gateway |
UPDATE: Optimized Hyperflow wake-up process on smaller appliances (up to 32 cores) now uses only two cores initially, reducing resource contention and improving stability during Elephant Flows. |
|
PRJ-55428, PMTR-104574 |
Security Gateway |
UPDATE: The severity of the debug message for |
|
PRJ-51989, PMTR-88361 |
Security Gateway |
UPDATE: The performance of the thread blocker feature (sk180437) is now improved and the feature is re-enabled. |
|
PRJ-47490, PRHF-28566 |
Security Gateway |
UPDATE: Implemented automatic purging of expired SIC certificates on Security Gateways to eliminate memory residues and prevent misuse. |
|
PRJ-54341, SNX-99 |
SSL Network Extender |
UPDATE: SSL Network Extender is updated to version 80008409. |
|
PRJ-53919, PRHF-32600 |
URL Filtering |
UPDATE: When URL Filtering operates in Background Mode and encounters an unclassified connection, instead of being approved automatically, such connection is now accepted or rejected based on Access Rule Base execution, and listed in the "unknown" category. |
|
PRJ-51532, PMTR-97036 |
Mobile Access |
UPDATE: The Mobile Access Portal is no longer compatible with the Chrome browser on iOS and Android mobile devices. |
|
PRJ-53587 |
Gaia OS |
UPDATE: The Gaia Clish commands " |
|
PRJ-54590, PMTR-100544 |
Gaia OS |
UPDATE: Extended the "allowed-client" setting to enforce IP restrictions for both password and SSH key authentication methods, providing more comprehensive access control. |
|
PRJ-54672, PMTR-104379 |
VoIP |
UPDATE: SIP over UDP requests and responses may be dispatched to different firewall instances when a single-direction rule is defined in the Rule Base, potentially causing returned SIP traffic to be dropped as an unknown connection. To address this, a new global parameter " |
|
PRJ-55719, PMTR-105631 |
VPN |
UPDATE: VPN connections are now synchronized to all members of the Security Group by default. The default value of the " |
|
PRJ-53822, PMTR-102697 |
CloudGuard Network |
UPDATE: It is no longer necessary to run the $MDS_FWDIR/scripts/alignLicensesInDB.sh script (sk181500) after the import during Security Management Database migration. The script now runs automatically after the migration. |
|
PRJ-53101, PMTR-101359 |
Scalable Platforms |
UPDATE: Removed the ability to delete the " |
|
PRJ-56057, ODU-1923 |
Automatic Updates - HCP |
UPDATE: Added Update 18 of HealthCheck Point (HCP) Release. Refer to sk171436. |
|
PRJ-55914, ODU-1849 |
Automatic Updates - CPView |
UPDATE: Added Take 97 of CPotelcol (OpenTelemetry Collector) Release Updates. Refer to sk180522. |
|
PRJ-56193, ODU-1787 |
Automatic Updates - Web SmartConsole |
UPDATE: New features and improvements are released in Take 114 via self-updatable package. Refer to sk170314. |
|
PRJ-55917, ODU-1819 |
Automatic Updates - CloudGuard Network |
UPDATE: Added Take 21 of Public Cloud CA Bundle. Refer to sk172188. |
|
PRJ-50936, PRHF-31120 |
Security Management |
SmartConsole may freeze when selecting a client in the Security Gateway object > Identity Awareness tab > RADIUS Accounting Settings.
|
|
PRJ-53454, PRHF-32750 |
Security Management |
Upgrade of the Multi-Domain Security Management Server may fail with the error "Folder object not found".
|
|
PRJ-52045, PRHF-31789 |
Security Management |
In some scenarios, the Security Management Server upgrade to R81.20 fails with "java.lang.String incompatible with com.checkpoint.infrastructure.types.CPUUID" in the upgrade report. The issue occurs during the import of the User Data Domain.
|
|
PRJ-54005, PRHF-33311 |
Security Management |
In rare scenarios, the Management Server upgrade fails during the import stage with "an eclipse error has occurred enable logging on EclipseLinkExceptionHandler to see full error".
|
|
PRJ-46788, PRHF-29046 |
Security Management |
In some scenarios, an upgrade of Security Management Server or Multi-Domain Security Management Server fails with the "Failed: upgrade of "DOMAIN_NAME". For more details see upgrade logs below" error in the upgrade report.
|
|
PRJ-52546, PMTR-100061 |
Security Management |
In rare scenarios, the CPCA process on the Security Management Server / Domain Management Server may exit unexpectedly, creating a core dump file. Refer to sk183101. |
|
PRJ-52889, PRHF-32372 |
Security Management |
"Mapping of Data Center [xxxx] failed. Next mapping is in 300 seconds" errors in the CME logs show failed attempts to scan deleted data centers. |
|
PRJ-45161, PRHF-28147 |
Security Management |
In rare scenarios, login to the Security Management Server may fail with timeout and the FWM process on the Management Server may unexpectedly exit, creating a core dump file. |
|
PRJ-53771, PRHF-32899 |
Security Management |
In some scenarios, the Management API command " |
|
PRJ-53507, PRHF-32561 |
Security Management |
After upgrading, administrators with read/write permissions to edit Security Gateways and Clusters may lack IPS permissions and are unable to perform certain management tasks, such as enabling or disabling blades. |
|
PRJ-52434, PRHF-31953 |
Security Management |
When Global Domain Assignment fails with the "More than one object named 'XXX' exists" error, not all duplicate objects are listed. |
|
PRJ-53760, PRHF-32936 |
Security Management |
The " |
|
PRJ-49241, PMTR-89973 |
Security Management |
In some scenarios, the SmartTask "Before login" trigger may be executed although there was no login operation. |
|
PRJ-52781, PRHF-32286 |
Security Management |
When using the Management API command " |
|
PRJ-49438, PRHF-30400 |
Security Management |
The UPDATE_INSPECT_FILES process of Upgrade Tools may exit with a core dump. |
|
PRJ-52019, PRHF-31622 |
Security Management |
Exporting a policy that contains thousands of rules may fail when the "Hit Count" column is enabled. |
|
PRJ-50844, PRHF-31188 |
Security Management |
Export of a list of objects from the Global Object Explorer fails with the "Export policy is not supported when rule name is in a format of UUID" error message. |
|
PRJ-51121, PRHF-31318 |
Security Management |
In rare scenarios, if a Star VPN Community object is created, publish operations may fail. |
|
PRJ-50755, ACCESS-704 |
Security Management |
Access to and from the Generic Data Center objects may not be enforced when MDPS configuration is enabled on the Security Gateway. |
|
PRJ-52915, PRHF-32334 |
Security Management |
Deleting a Security Gateway object fails if there is a license attached to the Security Gateway and the Security Gateway is physically disconnected. |
|
PRJ-54066, PRHF-33349 |
Security Management |
In some scenarios, users may be disconnected from SmartConsole, and an FWM process core dump is generated. |
|
PRJ-53502, PRHF-32764 |
Security Management |
In some scenarios, SmartConsole may unexpectedly disconnect. |
|
PRJ-52518, PRHF-32065 |
Security Management |
In rare scenarios, Access policy installation may fail with the "Installation failed. Reason: Failed to load Policy on Security Gateway" or "Operation failed, install/uninstall has been improperly terminated" messages. |
|
PRJ-53895, PRHF-32890 |
Security Management |
In rare scenarios, the " |
|
PRJ-48937, PRHF-30136 |
Security Management |
The Management API command " |
|
PRJ-52778, PRHF-32265 |
Security Management |
Objects Explorer search fails with "Error retrieving results" when more than twenty thousand IP addresses match the search criteria. |
|
PRJ-49057, PRHF-30130 |
Security Management |
In rare scenarios, publishing a session in SmartConsole fails with the "got at least one duplicate UID in requested list, duplicates UIDs: [XXX]" error. |
|
PRJ-52850, PRHF-32222 |
Security Management |
Login to SmartConsole fails if the "Read_Write_All_Profile" permissions profile is deleted. |
|
PRJ-57031, PRHF-30884 |
Security Management |
Log queries fail with the error "Problems have occurred during search" when Domain migration is in progress. This occurs specifically during the execution of the Management API command " |
|
PRJ-55523, PMTR-85279 |
Security Management |
In rare scenarios, the CPD process may exit with core dumps. |
|
PRJ-52346, PRHF-31814 |
Security Management |
In some scenarios, the PostgreSQL database fully utilizes disk space on the Standby Security Management Server. |
|
PRJ-53677, PMTR-98465 |
Security Management |
The Management API command " |
|
PRJ-51630, PRHF-31681 |
Multi-Domain Security Management |
In rare scenarios, login to a newly created Domain fails and the CPCA daemon has the "down" status. Refer to sk181798. |
|
PRJ-53552, PRHF-32881 |
Multi-Domain Security Management |
When a Domain name (for example, " |
|
PRJ-52950, PRHF-31148 |
Multi-Domain Security Management |
In a Multi-Domain Security Management environment, there may be synchronization timeout errors, and automatic revisions purge may fail. |
|
PRJ-55658, PRHF-34503 |
Multi-Domain Security Management |
In some scenarios, in a Multi-Domain Security Management environment, creating a Domain on a remote Multi-Domain Management Server may fail with "Check connectivity between Domain Servers IPs and initialize SIC manually" error. |
|
PRJ-54514, PRHF-33741 |
SmartConsole |
In rare scenarios, login to SmartConsole fails. |
|
PRJ-50695, PRHF-31105 |
Logging |
In some scenarios, viewing a Forensics report in Threat Hunting fails with the "Unable to load report" error. Refer to sk181800. |
|
PRJ-54061, PMTR-102031 |
Logging |
In rare scenarios, empty log list may be displayed when selecting a log file to view in SmartConsole. |
|
PRJ-54238, PRHF-20992 |
Logging |
Log Exporter may unexpectedly exit when using a non-RSA certificate. |
|
PRJ-51276, PRHF-31323 |
Logging |
When adding a table widget to a SmartView report:
|
|
PRJ-51444, PRHF-31195 |
Logging |
The traffic field in the SmartEvent "Application and URL Filtering" report, specifically in the "High Bandwidth Applications" section, is incorrectly displaying data in petabytes (PB) instead of the expected gigabytes (GB). |
|
PRJ-50794, PRHF-31160 |
Logging |
In SmartView, filtering logs by " |
|
PRJ-51517, PRHF-31567 |
Logging |
Log searches for the same time period may return more results in SmartConsole compared to SmartView. |
|
PRJ-55512, PRHF-34283 |
Logging |
In some scenarios, the name of the Security Gateway is not shown in the title of the automatic reaction email, although it should be. |
|
PRJ-50262, PRHF-30848 |
Logging |
In SmartView, some countries are not displayed in the countries picker. |
|
PRJ-52941, PRHF-32194 |
Logging |
In the Logs view, the "TCP-other" and "UDP-other" services are displayed as generic service IDs, for example, " |
|
PRJ-54020, PMTR-99697 |
Logging |
In rare scenarios, Zero Phishing logs may disappear from the SmartConsole Logs view. |
|
PRJ-53451, PMTR-101938 |
Security Gateway |
Even if the interface is configured with an MTU higher than 1500, the maximal MTU over CPAS is limited to 1500. |
|
PRJ-53075, PMTR-96269 |
Security Gateway |
In some occasions, redundant errors appear in logs: " |
|
PRJ-51970, PMTR-99054 |
Security Gateway |
The CPWD daemon does not restart automatically. |
|
PRJ-51480, PMTR-98475 |
Security Gateway |
The RAD process exits and creates a core file on the Security Gateway. |
|
PRJ-55423, PRHF-33908, PRJ-55422, PRHF-33730, PRJ-55424, PRHF-33912 |
Security Gateway |
In a multi-cloud networking environment (AWS GWLB and VMware NSX-T), the Security Gateway may crash due to memory corruption. |
|
PRJ-54526, PMTR-96126 |
Security Gateway |
In some scenarios, when SecureXL User Mode is enabled, the Security Gateway drops traffic after it was processed. |
|
PRJ-54628, PRHF-33768 |
Security Gateway |
In some scenarios, adding sequential IP addresses as MDPS task addresses may fail. |
|
PRJ-51049, PMTR-97496 |
Security Gateway |
In some scenarios, websites that use HTTP2 protocol do not load properly. |
|
PRJ-49902, PRHF-30541 |
Security Gateway |
Kernel Memory usage increases persistently each day on a Security Gateway/Security Group when CGNAT is enabled. Refer to sk182140. |
|
PRJ-54529, PMTR-103857 |
Security Gateway |
In some scenarios, the Security Gateway offloads connections to SecureXL in error when the initial route lookup could not find a route for it. |
|
PRJ-52774, PRHF-32213 |
Security Gateway |
In rare scenarios, the FWK process may unexpectedly exit. |
|
PRJ-52647, PRHF-31996 |
Internal CA |
CRL fetch may fail when passing through a Security Gateway with deep inspection, even if the connection hold is quickly released. CPCA closes the connection prematurely. |
|
PRJ-50701, PRHF-30997 |
Threat Prevention |
The Anti-Virus Software Blade fails to parse IoC feeds that contain IPv6 addresses. |
|
PRJ-48310, ACCESS-680 |
Threat Prevention |
In rare scenarios, when the Anti-Virus, Threat Extraction and Threat Emulation Software Blades are enabled, some connections that were on hold are dropped. |
|
PRJ-53201, PMTR-97508 |
Threat Prevention |
In some scenarios, policy installation and IPS package updates may take a very long time to finish and cause traffic drops. |
|
PRJ-51341, PRHF-29801 |
Identity Awareness |
In some scenarios, the PEPD process may consume a high CPU because of a high rate of identity propagation. Refer to sk182588. |
|
PRJ-46490, PRHF-28698 |
Identity Awareness |
Policy Enforcement Point (PEP) logs show a username after the user session is expired. Refer to sk181553. |
|
PRJ-53249, PRHF-32646 |
IPS |
A connectivity issue may happen when processing a specific HTTP2 traffic. |
|
PRJ-43104, PMTR-87284 |
DLP |
Multiple internal errors, including file metadata retrieval failures and parsing errors, may be printed in the DLPDA logs. |
|
PRJ-53128, PRHF-32438 |
Anti-Virus |
The DLPU process may unexpectedly exit due to uninitialized memory when the Anti-Virus Software Blade scans files. Refer to sk182030. |
|
PRJ-55520, PMTR-104668 |
SSL Inspection |
In rare scenarios, when HTTPS Inspection is enabled, the FWK process may unexpectedly exit due to memory violation. |
|
PRJ-54641, PMTR-90199 |
Mobile Access |
The HTTPD process of the Mobile Access Portal may exit with a core dump file. |
|
PRJ-51154, PMTR-92065 |
Mobile Access |
Web Application names column width is too narrow to fit in the Mobile Access Portal. Refer to sk181774. |
|
PRJ-54324, PRHF-33620 |
ClusterXL |
In a rare scenario, the FWK process consistently exits causing failovers. Crashes may happen on both cluster members. |
|
PRJ-54170, PMTR-103483 |
ClusterXL |
In rare scenarios, in a cluster environment, the CPDiag tool may crash. |
|
PRJ-52896, PMTR-100934 |
ClusterXL |
In a rare scenario, after an upgrade, connections between networks may be dropped with the "First Packet isn't SYN" error. |
|
PRJ-55307, PMTR-104663 |
SecureXL |
Potential kernel crash in MDPS configurations when modifying and re-adding slave interfaces to bonds in non-default virtual systems. |
|
PRJ-55493, PMTR-103647 |
SecureXL |
When SecureXL User Mode (UPPAK) is enabled, packets originating from the Security Gateway may not be fragmented properly. |
|
PRJ-53481, PMTR-101681 |
SecureXL |
In some scenarios, when QoS Software Blade is enabled and SecureXL works in User Mode (UPPAK), Security Gateway may crash with the "invalid data" error. |
|
PRJ-55799, PMTR-105097 |
SecureXL |
When SecureXL User Mode (UPPAK) is enabled, in some scenarios, a VSX Security Gateway with many Virtual Systems may crash. |
|
PRJ-55566, PMTR-104603 |
SecureXL |
The USIM process may unexpectedly exit. |
|
PRJ-54331, PRHF-33511 |
SecureXL |
In rare scenarios, the Security Gateway crashes when the interface goes down right before it transmits packets out. |
|
PRJ-54428, PMTR-102834 |
SecureXL |
In some scenarios, the VSX Security Gateway does not initialize the Virtual System correctly when connected to a Virtual Router or Virtual Switch. |
|
PRJ-54323, PMTR-103651 |
SecureXL |
In some scenarios, traffic with Passive or Active Streaming configuration may not correctly pass through a Virtual Router on a VSX Security Gateway. |
|
PRJ-55958, PRHF-34753 |
SecureXL |
The duration of each "stop" and "start" API call for the LightSpeed Acceleration interfaces may take several seconds. Refer to sk182585. |
|
PRJ-54425, PMTR-102759 |
SecureXL |
In some scenarios, the VSX Security Gateway may fail to properly reroute traffic originating from a Virtual Switch. |
|
PRJ-55344, PMTR-104736 |
Routing |
OSPFv2 graceful restart mechanism fails on broadcast and point-to-multipoint networks due to the omission of an "IP-Address" field in the grace LSA. |
|
PRJ-55399, PMTR-104846 |
Routing |
OSPFv3 NSSA may fail to re-originate Type 7 LSAs after an OSPFv3 process restart, disrupting proper route propagation. |
|
PRJ-54603, PMTR-104146 |
Routing |
Routing BFD sessions using IPv6 global addresses on single-hop interfaces fail to recover after the network interface is administratively disabled and re-enabled. |
|
PRJ-52671, PRHF-32205 |
Routing |
Enabling rfc1583-compatibility via Clish fails with " |
|
PRJ-55016, PMTR-104584 |
Gaia OS |
The " |
|
PRJ-53387, PRHF-32742 |
Gaia OS |
Gaia Portal operation mode options are not visible in the Editing Bond window. Refer to sk182432. |
|
PRJ-52416, PRHF-31929 |
Gaia OS |
SNMP query for OID 1.3.6.1.4.1.2620.1.6.7.5.1.5 (CPU utilization per CPU core) and the " |
|
PRJ-51020, PRHF-31136 |
VPN |
Duo management reports display incorrect access source locations due to Security Gateways providing inverted IP addresses during the two-factor authentication challenge response process. Refer to sk181783. |
|
PRJ-55293, PMTR-103968 |
VPN |
Configuring a Large Scale VPN (LSV) with IPv6 and establishing a VPN tunnel may cause the FWK process to exit. |
|
PRJ-55488, PRHF-30493 |
VPN |
During high-frequency encryption of packets over a VPN tunnel, the Security Gateway may assign the same sequence number to multiple packets. This causes the receiving VPN peer to mistakenly identify these legitimate packets as replay attacks and drop them. |
|
PRJ-52912, PRHF-32348 |
VPN |
SNMP queries show a different number of connected RA VPN users than what is shown in CPView and from CLI. RaUserState information is missing in the SNMP MIB file. |
|
PRJ-55986, PMTR-106469 |
VPN |
During high-volume VPN tunnel initiations, several packets may be dropped with "encrypted packet too big". |
|
PRJ-53940, PRHF-32773 |
VPN |
After running the " |
|
PRJ-53715, PRHF-32719 |
VPN |
Tunnel testing fails after an upgrade. Refer to sk182267. |
|
PRJ-54548, PMTR-104230 |
Multi-Portal |
With a special routing configuration, an active Cluster Member may accept portal traffic (on TCP ports 80 and 443) destined to a Standby member IP address. |
|
PRJ-53118, PMTR-99343 |
VSX |
In a VSX Cluster with IPv6 enabled, after an upgrade, VS's without IPv6 address may fail to install the Access policy. |
|
PRJ-54598, PRHF-33572 |
VSX |
In rare scenarios, the CPD process of the default Virtual System on a VSX Gateway (VS0) gets stuck. |
|
PRJ-51993, PMTR-99136 |
Harmony Endpoint |
Upgrade failures may occur when the source server contains an existing am_top_infections_master view, as the upgrade process attempts to drop and recreate this view during the final stages of the Endpoint Server database schema update. |
|
PRJ-53555, PMTR-101660 |
CloudGuard Network |
Central License tool (vsec_lic_cli) unexpectedly removes Central Licenses from the default license pool on the Primary Multi-Domain Security Management Server in a High Availability (HA) environment. Refer to sk182483. |
|
PRJ-47808, PRHF-29624 |
CloudGuard Network |
In the Kubernetes Data Center, the Import window may be stuck in "Initializing" state. |
|
PRJ-55862, PRHF-33031 |
Scalable Platforms |
When using MPDS routing separation and Maestro Dual site, the Log Server may get disconnected on a Standby site. |
|
PRJ-54335, PMTR-96560 |
Scalable Platforms |
When different Network Interface Card models are attached among Maestro Security Group members, it may trigger unnecessary reboots. |
|
PRJ-55461 |
Scalable Platforms |
When dynamic split is enabled, the system fails to update the "/tmp/mq_cores_list" file, causing "cores_verifier" and "asg perf" verifiers to display incorrect PPAK cores numbers. |
|
PRJ-54126, PMTR-103375 |
Scalable Platforms |
After changing the CoreXL configurations of a VS in SmartConsole, the dynamic split state switches to off until the " |
|
PRJ-53511, PRHF-29741 |
Scalable Platforms |
When running the Gaia gClish command " |
|
PRJ-43739, PMTR-88853 |
Scalable Platforms |
The " |
|
PRJ-49848, PRHF-30436 |
Scalable Platforms |
Site to Site VPN traffic may be interrupted after installing policy with VSLS. |
|
PRJ-50626, PRHF-29180 |
Carrier Security |
|
Take 76
Released on 21 July 2024 and declared as Recommended on 31 July 2024
|
ID |
Product |
Description |
|---|---|---|
|
Take 76 - Improvements and Resolved Issues |
||
|
PRJ-56150, PRHF-35183 |
Security Management |
When the Compliance Software Blade is enabled, the FWM process may unexpectedly exit and generate a core dump. Refer to sk182507. See Critical Information for R81.20 Jumbo Hotfix Accumulator. |
|
PRJ-55940, PRHF-34652 |
Security Gateway |
The " |
|
PRJ-55953, PMTR-106146 |
Security Gateway |
Security Gateway running in SecureXL User Mode (UPPAK) may crash during driver removal showing See Critical Information for R81.20 Jumbo Hotfix Accumulator. |
Take 70
Released on 01 July 2024
|
ID |
Product |
Description |
|---|---|---|
|
Take 70 - New Functionality |
||
|
PRJ-51436, PMTR-98141 |
SSL Inspection |
NEW: Added ability to import PKCS#12 files using AES-256-CBC encryption with PBKDF2-HMAC-SHA-256. This enhancement is designed for use in multi-portal environments and HTTPS Inspection scenarios. Refer to sk184451. |
|
PRJ-53699, PMTR-101481 |
Security Management |
NEW:
|
|
PRJ-50184, PRHF-29458 |
Threat Prevention |
NEW: This Jumbo Hotfix Accumulator Take introduces enhanced protection against zero-day attacks. It detects and blocks advanced malware variants by automatically analyzing and identifying communication patterns. The feature is disabled by default. Refer to R81.20 Threat Prevention Administration Guide. |
|
PRJ-42991 |
Identity Awareness |
NEW: Added Identity Cache Mode for Identity Sharing Protocols (disabled by default). Refer to sk181613. |
|
PRJ-52856, PRHF-32233 |
CloudGuard Network |
NEW: Added support for AWS Elastic Network Interfaces (ENIs). These ENIs can now be viewed and managed in SmartConsole, similar to how other supported Data Center objects are handled. The feature is disabled by default. Refer to R81.20 CloudGuard Controller Administration Guide > Supported Data Centers > CloudGuard Controller for Amazon Web Services (AWS). |
|
PRJ-48744, PMTR-94089 |
SmartConsole |
NEW: Added support for 3072 bits key size in IKE certificates. To use 3072 bits key size, refer to "HTTPS Portals (Multi-Portal) Certificate, VPN Certificate" section in sk96591. |
|
Take 70 - Improvements and Resolved Issues |
||
|
PRJ-49174, PRHF-30294 |
Security Management |
UPDATE: Added verification for policy deletion. If the policy is installed on the Security Gateway, the Management API command " |
|
PRJ-52448, PRHF-31852 |
Security Management |
UPDATE: Added an ability to configure the schedule for Compliance Software Blade scans. This should prevent login issues during the scans. Refer to sk182033. |
|
PRJ-52065, PMTR-99262 |
SmartConsole |
UPDATE: The SmartConsole Change Report now highlights changes to the disable/enable state of rules more clearly. |
|
PRJ-53113, PMTR-101354 |
Security Management |
UPDATE: In the Change Report, updated some portions of the translated GUI. |
|
PRJ-48160 |
SmartView |
UPDATE: In SmartView Report, the Security Checkup tool now also provides the IoT data. |
|
PRJ-49861, PMTR-95625 |
CPView |
UPDATE: Added the "SecureXL" filter to the " |
|
PRJ-51125, PRHF-31302 |
Security Gateway |
UPDATE: Added ability to increase the instance processing queue size, by modifying the kernel parameter " |
|
PRJ-51975, CRYPTOIS-3027 |
SSL Inspection |
UPDATE: If inspection logging is configured, the "Inspect" log now displays the negotiated ciphers and TLS version used for successful inspections, both between the client and the Security Gateway, and between the Security Gateway and the Server. |
|
PRJ-48389, PMTR-93901 |
Threat Prevention |
UPDATE: It is now possible to disable a custom field in the IoC feed configuration. Refer to Management API Reference. |
|
PRJ-52400, ACCHA-3762 |
SecureXL |
UPDATE: The DOS/Rate Limiting feature can now run in SecureXL User Mode (UPPAK) environments without a Light Speed, allowing IoC Feeds that use it for enforcement to function properly. |
|
PRJ-53892, PMTR-101528 |
SecureXL |
UPDATE: The UPPAK start up script is changed to allocate additional memory buffers for handling Jumbo Frames based on Security Gateway configuration. |
|
PRJ-48177, PMTR-95781 |
Mobile Access |
UPDATE: jQuery UI is upgraded to version 1.13.2. |
|
PRJ-51701, PRHF-31790 |
Harmony Endpoint |
UPDATE: The audit event information when adding or removing Virtual Group members is now unified. The data includes the administrator name and device/user names for both actions. Previously:
|
|
PRJ-52863, PMTR-100872 |
CloudGuard Network |
UPDATE: Added support for Data Centers in AWS ca-west-1 Calgary region. |
|
PRJ-51248, PMTR-98059 |
CloudGuard Network |
UPDATE: The AWS Security Group Data Center object name now includes both the name tag and Security Group name, formatted as "ID <Name tag> <Security Group name>". Previously, only the name tag was included, with the format "ID <Name tag>". This change to include the Security Group name can be enabled by adding the setting " |
|
PRJ-50751, PMTR-96420 |
Infrastructure |
UPDATE: Added Python 3.11.4. |
|
PRJ-54099, PRJ-54459, PRJ-55301, PRJ-55687, ODU-1779, ODU-1755, ODU-1731, ODU-1667 |
Automatic Updates - Web SmartConsole |
UPDATE: New features and improvements are released in Take 100, Take 102, Take 104 and Take 111 via self-updatable package. Refer to sk170314. |
|
PRJ-54688, ODU-1707 |
Automatic Updates - CPView |
UPDATE: Added Take 93 of CPotelcol (OpenTelemetry Collector) Release Updates. Refer to sk180522. |
|
PRJ-54173, ODU-1683 |
Automatic Updates - CPSDC |
UPDATE: Added Take 34 of Check Point Support Data Collector (CPSDC) for Scalable Platforms and Maestro Security Appliances. Refer to sk164414. |
|
PRJ-54177, PRJ-55582, ODU-1803, ODU-1659 |
Automatic Updates - HCP |
UPDATE: Added Update 17 of HealthCheck Point (HCP) Release. Refer to sk171436. |
|
PRJ-53341, PRHF-32639 |
Security Management |
When a Domain object in a policy is set with a backslash in the suffix, policy installation fails with the "Unterminated string&CURRENTVERCMP" error. |
|
PRJ-50767, PRHF-31101 |
Security Management |
In rare scenarios, during an upgrade or Domain migration, the API readiness test fails if the upgrade failed. |
|
PRJ-51619, PRHF-31710 |
Security Management |
Deleting a domain may fail when using the createDomainRecovery.sh script. |
|
PRJ-50593, PRHF-30931 |
Security Management |
High Availability synchronization runs after every scheduled Application Control update, even if the Application Control is up to date. |
|
PRJ-51596, PRHF-31532 |
Security Management |
In rare scenarios, Global Policy assignment fails when there are many open Remote CPM Server sessions. Refer to sk181822. |
|
PRJ-52817, PMTR-100795 |
Security Management |
If there are changes in the HTTPS Policy and Certificates in the session, a "Something went wrong" message appears when opening the Change Report. |
|
PRJ-49362, PRHF-30301 |
Security Management |
There may be synchronization failure and, as a result, corrupted Domain policies on the Multi-Domain Security Server when a newly created local administrator on the backup Security Management Server makes changes to rules or objects, after the Active role is switched to that Security Management Server. |
|
PRJ-50019, PMTR-86613 |
Security Management |
It may not be possible to add/set a Threat Prevention Exception with a protection-or-site UID. |
|
PRJ-53349, PRHF-32714 |
Security Management |
In rare scenarios, the FWM process on the Security Management Server may unexpectedly exit or not start, creating a core dump file. |
|
PRJ-50999, PRHF-31180 |
Security Management |
Install Policy Presets may fail after purging all revisions. Refer to sk181652. |
|
PRJ-52012, PRHF-31738 |
Security Management |
In some scenarios, policy installation may fail and the displayed message erroneously refers to sk178886: "One of the updatable objects was downloaded incorrectly (see SK178886)". sk178886 describes a different scenario and does not resolve the issue. |
|
PRJ-54095, PRHF-28962 |
Security Management |
In rare scenarios, policy installation on R77.30 Security Gateway fails with "Operation failed, install/uninstall has been improperly terminated". Refer to sk180448. |
|
PRJ-53731, PMTR-102450 |
Security Management |
Changes Report may allow to list certain directory contents. |
|
PRJ-55502, PRHF-34248 |
Security Management |
A memory leak may occur in the FWM process which leads to SmartConsole connection failures. |
|
PRJ-49583, PRHF-30453 |
Security Management |
In some scenarios, when searching objects in SmartConsole, not all relevant results are highlighted. Refer to sk181454. |
|
PRJ-51507, PMTR-98543 |
Security Management |
The on-premises Security Management Server fails to connect to Check Point Portal when this Server has a proxy configured. |
|
PRJ-53472, PRHF-32798 |
Security Management |
In Multi-Domain Security Management environments, High Availability synchronization issues may arise after making and publishing changes through the SmartTasks feature in SmartConsole for a local Domain. |
|
PRJ-52825, PMTR-100459 |
Security Management |
On the Security Management Server, a CPD zombie process may be created. |
|
PRJ-51633, PRHF-30990 |
Security Management |
In rare scenarios, after an upgrade or a Domain migration:
|
|
PRJ-51696, PMTR-98972 |
Security Management |
After a global assignment, when installing policy on several installation targets at once, the log may show an incorrect rule name. |
|
PRJ-51514, PRHF-31523 |
Security Management |
The revisions purge process may get stuck due to an incomplete purge operation from a previous attempt. |
|
PRJ-51205, PRHF-31334 |
Security Management |
If all revisions were purged on the Security Management Server, the Management API command " |
|
PRJ-51543, PMTR-98526 |
Security Management |
Enabling automatic updates of Trusted CAs as described in sk173629 may fail. |
|
PRJ-50373, PMTR-96089 |
Security Management |
When attempting to load a SNORT Rules file that contains one or more spaces, the import process fails with an ambiguous error message. |
|
PRJ-41781, PRHF-25318 |
Security Management |
In some scenarios, SmartConsole may close unexpectedly when clicking the "View Changes" option in the Install Policy view. |
|
PRJ-52879, PRHF-32383 |
Security Management |
In rare scenarios, Access policy installation may fail with the "Installation failed. Reason: Failed to load Policy on Security Gateway" or "Operation failed, install/uninstall has been improperly terminated" messages. |
|
PRJ-52791, PRHF-32309 |
Security Management |
In rare scenarios, High Availability synchronization fails with "Peer is busy". |
|
PRJ-51677, PRHF-31606 |
Security Management |
Global Assignment fails with "Locked for editing by another administrator and need to be published or discarded before the operation can take place". Refer to sk181807. |
|
PRJ-49667, PMTR-92847 |
Security Management |
The " |
|
PRJ-51505, PMTR-98271 |
Security Management |
After a Multi-Domain Security Management upgrade to R81.20 version, some Check Point Portal Services may stop working. |
|
PRJ-51085, PRHF-31155 |
Multi-Domain Security Management |
In Multi-Domain Security Management environments with over two hundred administrators, Domain creation may fail with "Timeout expired while waiting for permissions calculation". |
|
PRJ-51085, PRHF-31155 |
Multi-Domain Security Management |
In Multi-Domain Security Management environments with over two hundred administrators, Domain creation may fail with "Timeout expired while waiting for permissions calculation". |
|
PRJ-48396, PRHF-29737 |
Multi-Domain Security Management |
In a Multi-Domain Security Management environment, the Management API commands " |
|
PRJ-51272, PRHF-30806 |
Multi-Domain Security Management |
In Multi-Domain Security Management environments, if there are more than three hundred forty Domains, login to SmartConsole fails. |
|
PRJ-52970, PRHF-29693 |
Multi-Domain Security Management |
The " |
|
PRJ-52578, PMTR-99856 |
Multi-Domain Security Management |
In some scenarios, during an upgrade of a Multi-Domain Security Management Server, the "created by" and "date created" fields of some rules may be displayed as "system" and "date of the upgrade".
|
|
PRJ-51570, PMTR-90798 |
SmartConsole |
SmartConsole slowness when adding applications to rules. Refer to sk182063. |
|
PRJ-53275, PMTR-100689 |
SmartProvisioning |
The Management API command " |
|
PRJ-53227, PMTR-100502 |
SmartProvisioning |
The Management API command " |
|
PRJ-52721, PRHF-30795 |
Logging |
Administrators without the "Run Script" permissions can enable or disable the option to run a script on a Security Gateway, using advanced configuration options. |
|
PRJ-41532, PMTR-87059 |
Logging |
The RAD events/logs may not be created when the Check Point cloud services return non-"200" response codes. |
|
PRJ-51148, PRHF-31357 |
Logging |
When Identity Awareness Software Blade is enabled, the "Src User Dn" and "Dst User Dn" fields in ICMP Logs are not masked for users without "Identities" permissions. Refer to sk181677. |
|
PRJ-51327, PMTR-96510 |
Logging |
In rare scenarios, after an upgrade, the LOG_EXPORTER process may fail to send the log files to SIEM or to the cloud. |
|
PRJ-53938, SL-8466 |
Logging |
In Smart-1 Cloud environments, exporting more than five thousand logs to CSV may fail. |
|
PRJ-51430, PRHF-31388 |
Logging |
In some scenarios, in Multi-Domain Management environments with over 300,000 network objects, the LOG_INDEXER process repeatedly exits if the procedure from sk164452 is not applied. |
|
PRJ-44795, PRHF-27521 |
Logging |
In rare scenarios, the FWD process on the Security Gateway may reach out of memory and produce a core dump file of around 3GB. |
|
PRJ-54108, SL-8626 |
Logging |
In rare scenarios, the LOG_EXPORTER process fails to send logs although marks them as sent. |
|
PRJ-49790, PMTR-95167 |
Logging |
The " |
|
PRJ-51525, SDWANGW-2060 |
Logging |
SD-WAN log information may be missing from SmartConsole connection log when SecureXL Templates are used. |
|
PRJ-52679, PRHF-31821 |
Security Gateway |
Running GTP traffic may cause a crash on a Security Gateway without a GTP license. |
|
PRJ-52725, PMTR-100460 |
Security Gateway |
In some rare cases, the Dynamic Split functionality may be disabled on VSX Gateways with Hyperflow enabled. When checking the status of Dynamic Balancing, the "Initiating shut-down due to state mismatch detection (reason dmd_sleep_status)" message is printed in the $FWDIR/log/dsd.elg file. |
|
PRJ-50576, PRHF-30817 |
Security Gateway |
There may be log entries related to the drop optimization feature, although the dropped traffic matches a non-logging rule. |
|
PRJ-55412, PRHF-34173 |
Security Gateway |
The CPD process may unexpectedly exit and create a core dump. |
|
PRJ-52521, PRHF-31425 |
Security Gateway |
The ICAP Server does not send data for the Threat Prevention Software Blades inspection, after the restart of the TEMAIN process. |
|
PRJ-47672, PRHF-29535, PRJ-47668, PRHF-29516 |
Security Gateway |
When there is fragmented traffic, the /var/log/messages file may be flooded with the "dst_release" entries. |
|
PRJ-52952, PRHF-32357 |
Security Gateway |
Traffic outages may occur because of high utilization of CPU cores that run CoreXL SND instances. Refer to sk181996. |
|
PRJ-53850, PMTR-94689 |
Security Gateway |
In some scenarios, when SecureXL works in the User Space (UPPAK) mode, the VSX Security Gateway cluster members are not able to send and receive CCP packets correctly through a Virtual Switch. |
|
PRJ-51439, PMTR-98446 |
Security Gateway |
A rare race condition may be triggered by the timing and packet patterns of VoIP traffic, and, as a result, the FWK process may restart. |
|
PRJ-53628, PMTR-102177 |
Security Gateway |
A memory issue may occur in a cluster environment, when SIP inspection is enabled. |
|
PRJ-48817, PRHF-30025 |
Security Gateway |
After deploying a new license to a Multi-Domain Log Module (MLM), all Customer Log Modules (CLMs) generate alert logs about missing license/contracts stating "No valid license was found". |
|
PRJ-41754, PRHF-25570 |
Security Gateway |
Some debug messages may appear in the /var/log/messages file, although the debug mode is not activated. The issue is cosmetic only. |
|
PRJ-49046, PMTR-94275 |
Security Gateway |
In rare scenarios, a file downloaded via HTTP may be corrupted. |
|
PRJ-52421, PMTR-99316 |
Security Gateway |
Incorrect static NAT destination is applied when the original destination in the NAT rule is the Security Gateway object, but the actual destination does not match the main IP address of the Security Gateway object. |
|
PRJ-51460, PRHF-31473 |
Security Gateway |
When using three or more ISP DNS proxies in High Availability mode and Load Sharing mode:
|
|
PRJ-47664, PRHF-29452 |
Security Gateway |
Incorrect local traffic routing by the Security Gateway causes message flooding in the /var/log/messages file. |
|
PRJ-50757, PRHF-31127 |
Security Gateway |
In a rare scenario, because of a memory allocation issue, the Security Gateway may crash and reboot. |
|
PRJ-48263, PMTR-93809 |
Security Gateway |
Notifications of SecureXL connection deletion appear unfiltered in the debug output, also when using a debug filter. |
|
PRJ-51946, PRHF-31780 |
Security Gateway |
In some scenarios, if a rule with a security zone is installed using accelerated install policy, the traffic may stop matching the NAT Rule Base. |
|
PRJ-51609, PRHF-31672 |
Security Gateway |
The ICAP Server may fail to initialize. |
|
PRJ-51039, PRHF-31146 |
Security Gateway |
The Security Gateway may crash during policy installation. |
|
PRJ-52796, PRHF-31617 |
Security Gateway |
In some scenarios, the VSX Security Gateway may not set the MAC header correctly when sending traffic back to Gaia OS directly out of an interface on a Virtual Router. |
|
PRJ-51528, PRHF-31572 |
Security Gateway |
Sporadic latency while uploading a file when HTTPS Inspection and ICAP client are active. Refer to sk181793. |
|
PRJ-52564, PRHF-32096 |
Internal CA |
CRLs may not be recreated after cleaning expired certificates from the ICA database. |
|
PRJ-42871, PRHF-26332 |
Threat Prevention |
After installing a hotfix in a cluster setup with a Threat Prevention policy that includes Network Objects, a member may get stuck during initialization after a reboot. Refer to sk180225. |
|
PRJ-53912, PMTR-102756 |
Threat Prevention |
SSH DPI may not work because of incorrect parsing of the client hello from a non-standard SSH client. |
|
PRJ-49031, PMTR-96716 |
Threat Prevention |
In a bond failover setup with the XOR bond mode, rapid toggling the port states causes the switch to display incorrect "connected" port statuses for both ports, despite one port being actually down, leading to a non-functioning bond interface. |
|
PRJ-53458, PMTR-87269 |
Threat Prevention |
Installation of Threat Prevention Policy fails with the error "No profile defined on GW <Name of Security Gateway Object>" in this scenario:
|
|
PRJ-53091, PMTR-98503 |
Threat Prevention |
The " |
|
PRJ-53404, PMTR-101787 |
Threat Prevention |
No feedback form appears when disabling the Zero Phishing Software Blade, although it should. |
|
PRJ-51335, PRHF-31398 |
Identity Awareness |
When a Multi-User Host is used with Identity Broker, the user session may expire on the PEP side, while still connected on the PDP, causing failure of user-based access. |
|
PRJ-49436, PMTR-92848 |
Identity Awareness |
In a rare scenario, revoked identity on Broker Publisher is not synchronized with its Broker subscribers. |
|
PRJ-52371, PRHF-31314 |
Identity Awareness |
After an upgrade, the Security Identifier (SID) for LDAP Users or LDAP Groups that were configured prior to the upgrade may be empty. Refer to sk181946. |
|
PRJ-52793, PRHF-32291 |
Identity Awareness |
In some scenarios, access roles using packet tagging are not calculated correctly for new sessions. Refer to sk182009. |
|
PRJ-50584, PRHF-30933 |
Identity Awareness |
During policy installation, users authenticated using the Captive Portal may get disconnected. |
|
PRJ-52873, PRHF-32296 |
Identity Awareness |
User/Security Gateway identities may be revoked unexpectedly if an additional update from the AD Query identity source is rejected due to Identity session conciliation. |
|
PRJ-50514, PMTR-92204 |
Identity Awareness |
In a Cluster Load Sharing environment or when a single Policy Decision Point (PDP) is shared among multiple Policy Enforcement Points (PEPs), the PDP registers the PEP, but the PEP may not be aware of this registration. |
|
PRJ-52541, PRHF-31937 |
IPS |
In a rare scenario, Security Gateway may drop client-to-server web browsing traffic. |
|
PRJ-50805, PRHF-28437 |
IPS |
There may be excessive "fwconn_chain_is_data_conn failed" messages in the /var/log/messages files when activating the IPS Software Blade. |
|
PRJ-51183, PRHF-31305 |
Anti-Virus |
Some file downloads fail with a logged "failure-reject" error because of the Anti-Virus Software Blade improperly classifying documents, causing inspection failures. |
|
PRJ-53572, PRJ-53566 |
Anti-Virus |
In a rare scenario, the Security Gateway crashes due to memory corruption caused by the Anti-Virus Software Blade. |
|
PRJ-53125, PRHF-32092 |
Anti-Virus |
The DLPU process may frequently exit with a core dump file. |
|
PRJ-52048, PRHF-31811 |
Mobile Access |
SSL Network Extender (SNX) cannot connect after installing Jumbo Hotfix Accumulator. Refer to sk181805. See Critical Information for R81.20 Jumbo Hotfix Accumulator. |
|
PRJ-42809, PRHF-24122 |
ClusterXL |
Cluster members may crash, generating vmcore files in the /var/log/crash directory. |
|
PRJ-51588, PRHF-31481 |
ClusterXL |
The Security Gateway may crash during the conversion from VRRP Cluster to ClusterXL Cluster. |
|
PRJ-50117, PRHF-30245 |
ClusterXL |
In a cluster environment, the Security Gateway may become unresponsive on the Active member, and after a failover the issue occurs on the new Active member also. |
|
PRJ-52799, PRHF-31629 |
SecureXL |
The Security Gateway may fail to add interfaces to the SecureXL accelerated interfaces list. |
|
PRJ-44520, PRHF-23500 |
SecureXL |
Multicast packets received on an interface with PIM disabled can cause multicast packet drops on other interfaces by filling up the kernel routing queue. |
|
PRJ-52802, PRHF-31631 |
SecureXL |
In some scenarios, the VSX Security Gateway may not set the MAC header correctly when sending traffic directly out of an interface on a Virtual Router or Virtual Switch. |
|
PRJ-51210, PRHF-31259 |
SecureXL |
In Kernel mode Firewall, traffic passing through the GRE tunnel may not reach the peer. |
|
PRJ-50856, PMTR-96036 |
SecureXL |
There may be a delay in enforcing DOS/ Rate Limiting rules to drop packets when concurrent connection limits are exceeded. |
|
PRJ-51622, PMTR-97796 |
SecureXL |
In some scenarios, fragmented ICMP packets may bypass the DOS/ Rate limiting deny list. |
|
PRJ-52806, PMTR-96017 |
SecureXL |
In some scenarios when Route based probing is configured, the VSX Security Gateway sends out encrypted traffic with a source IP address of all zeroes through a Virtual Switch interface. This traffic may be dropped by routers, the VPN peer Gateway or other Security Gateways due to the invalid source IP address. |
|
PRJ-54530, PRHF-33850 |
SecureXL |
Policy installation on a Security Gateway running with SecureXL User Mode (UPPAK) fails with the "2000240" or "2000267" error code. Refer to sk182272. |
|
PRJ-53479, PMTR-102025 |
SecureXL |
Entering Maintenance Mode during the boot process may result in disabling SecureXL User Mode (UPPAK). |
|
PRJ-52859, PMTR-101273 |
SecureXL |
In some scenarios, when SecureXL User Mode (UPPAK) is enabled, the Security Gateway crashes during boot up. |
|
PRJ-53253, PMTR-101573 |
SecureXL |
When SecureXL User Mode (UPPAK) is enabled, there may be some increased latency when sending cleartext traffic between a Virtual System and a Virtual Router. |
|
PRJ-53061, PMTR-101152 |
SecureXL |
During the deny list update process, there is a temporary gap where no IP addresses are blocked, allowing unwanted traffic to pass through the Security Gateway unfiltered. |
|
PRJ-52663, PMTR-100376 |
SecureXL |
DOS/Rate Limiting commands that require a change from default configuration are not allowed to run in SecureXL User Mode (UPPAK) . "ERROR: fwaccel_dos: DOS features are not supported for SecureXL User Space Mode with LightSpeed" is printed in the /var/log/messages file. |
|
PRJ-55396, PMTR-104268 |
SecureXL |
A race condition may occur in a large scale VSX Cluster environment and SecureXL User Mode (UPPAK) is enabled. |
|
PRJ-53856, PRHF-33138 |
Routing |
ROUTED process assert failure may take place when LSA from a neighbor's retransmission list is freed if that LSA belongs to the max age hold tree that is flooded at max age. |
|
PRJ-53172, PMTR-99623 |
Routing |
The ROUTED process may unexpectedly exit because of an OSPF assertion failure. |
|
PRJ-53054, ROUT-2968 |
Routing |
BGP peers may experience timeouts when these conditions occur simultaneously:
|
|
PRJ-52734, PRHF-31847 |
Routing |
In networks where multicast groups are manually configured through IGMP if only one membership report is received for a specific <S,G> pair and no further reports follow, it may cause outages. |
|
PRJ-52659, PRJ-52656, PRHF-31818, PRHF-31977 |
Routing |
Cluster failover may occur when the ROUTED process due to a memory leak unexpectedly exits with a core dump file generated. |
|
PRJ-53057, PRHF-32078 |
Routing |
In scenarios where numerous BGP peers are configured with the "multihop" option enabled, combined with short "keepalive" settings and a large number of routes being received from each peer, the ROUTED process may experience high CPU utilization. |
|
PRJ-51260, PRHF-31307 |
Routing |
It may not be possible to propagate a newly added static route through OSPF. |
|
PRJ-51983, ROUT-2393 |
Routing |
When running a Gaia API request that results in multiple configuration changes, only the first change may be applied initially. The subsequent changes are not enforced until another change triggers re-processing. |
|
PRJ-53569, PMTR-100631 |
Routing |
In rare scenarios, when a PIM interface or PIM instance stops working, the Security Gateway may crash if trying to access a bogus reference to a PIM neighbor. |
|
PRJ-48210, PMTR-91011 |
VPN |
IKEv2 Remote Access stability issues. |
|
PRJ-47953, PMTR-92800 |
VPN |
Establishing an IKEv2 tunnel with Cross AZ Cluster may fail. |
|
PRJ-53384, PMTR-101269 |
VPN |
IPv6 non-VPN traffic may be dropped with "Clear text packet should be encrypted". |
|
PRJ-53178, PRHF-32616 |
VPN |
In a rare scenario, while connecting SNX client, the VPND process may exit. |
|
PRJ-52830, PMTR-96593 |
VPN |
In a rare scenario, in a Maestro environment, the first packet of the VPN tunnel is lost or has a large delay. |
|
PRJ-52514, PRHF-32030 |
VPN |
In Cross-AZ clusters, when using probing-based link selection for High Availability and Load Sharing, there may be a potential VPN traffic outage. Refer to sk181909. |
|
PRJ-54241, PMTR-103618 |
VPN |
In a VPN Community with a configuration involving two Security Gateways (a Center Cluster and a Satellite Security Gateway) with IPv6 external and internal interfaces, when attempting to establish a Link Selection Star community between them, the VPN process may unexpectedly exit due to repetitive IKE core crashes on one of the Security Gateways while the other Security Gateway tries to establish a tunnel, resulting in connectivity issues. |
|
PRJ-52949, PRHF-32461 |
VPN |
When the DAIP Gateway public IP address occasionally changes, the connected Security Gateway fails to update the new IP address and continues responding to the old IP address, causing communication issues. |
|
PRJ-44265, PRHF-20660 |
VPN |
The FWK process crashes sporadically, causing impact on traffic due to an issue related to the decryption of fragmented traffic. |
|
PRJ-51297, PMTR-97905 |
VSX |
When adding a new Virtual System, a CPD core dump file may be generated. |
|
PRJ-52509, PMTR-99867 |
Gaia OS |
When a non-local user executes a Gaia API command, the action is incorrectly logged as performed by the "admin" user in the /var/log/messages file. |
|
PRJ-52724, PRHF-32115 |
Gaia OS |
The MONITORD daemon causes high CPU after 388 days of uptime. Refer to sk181922. |
|
PRJ-53486, PMTR-95316 |
Gaia OS |
Some valid interfaces may not be available with running the " |
|
PRJ-53195, PRHF-32504 |
Gaia OS |
In rare scenarios, the Gaia Portal daemon HTTPD may unexpectedly exit and create a core dump file in the /var/log/dump/usermode/ directory. |
|
PRJ-52886, PMTR-100352 |
Gaia OS |
Disabling a bond with one interface from Gaia Portal may fail. |
|
PRJ-54180, PMTR-103543 |
Gaia OS |
Removing unused built-in user called "cp_ender" that may appear in Gaia OS after an upgrade. Refer to sk182185. |
|
PRJ-51441, EPS-54570 |
Harmony Endpoint |
Clients may not be assigned to default groups after adding a device to the AD Server. |
|
PRJ-50572, EPS-53505 |
Harmony Endpoint |
In an on-premises environment, large Active Directory groups with more than 1500 members appear empty or have incomplete membership information. |
|
PRJ-52129, PRHF-31662 |
Harmony Endpoint |
When attempting a one-time login for a migrated client in the Check Point Portal, the request fails with "400 error" caused by duplicate |
|
PRJ-51292, EPS-54427 |
Harmony Endpoint |
In some scenarios, Unified Endpoint Policy Management (UEPM) database upgrade fails or takes a long time during the scripts stage. |
|
PRJ-51138, PRHF-31298 |
Harmony Endpoint |
When duplicate users with the same name and domain exist in the database or Active Directory, FDE Pre-boot authentication on LAN may fail, not able to identify the user attempting to log in. |
|
PRJ-53431, PRHF-32749 |
Harmony Endpoint |
SmartEndpoint creates an empty "Policy Report" CSV file. |
|
PRJ-50589, PRHF-30890 |
CloudGuard Network |
In an environment with Cloud Security Gateways, frequent High Availability synchronization sessions can cause high CPU utilization. As a result, change of the Activity status may fail. |
|
PRJ-50638, PRHF-28490 |
CloudGuard Network |
CloudGuard Controller synchronizes cloud object configurations with a noticeable latency, reflecting the updates made to those objects in the cloud environment after a significant time delay. |
|
PRJ-51302, PRHF-31310 |
Scalable Platforms |
When using NAT64 rules, Server to Client traffic may be dropped because of the "Out of state" error. |
|
PRJ-47396, PMTR-92635 |
Scalable Platforms |
Excessive CPU usage occurs on a Maestro Security Group because of exhaustion of available NAT ports when traffic is subjected to NAT and Layer 4 (L4) load distribution is enabled. Refer to sk181925. |
|
PRJ-53832, PMTR-73771 |
Scalable Platforms |
Before enabling MDPS, CoreXL Dynamic Balancing (sk164155) must be disabled. |
|
PRJ-52644, PMTR-100357 |
Scalable Platforms |
After a failover scenario, the " |
|
PRJ-53083, PMTR-97118 |
Scalable Platforms |
Redundant "MHO_stateAgent[3230]: QuidAddon: System not ready yet - attempting to re-init" messages in the /var/log/messages file. |
|
PRJ-52883, MBS-18033 |
Scalable Platforms |
When running the " |
|
PRJ-53622, PMTR-99823 |
Scalable Platforms |
The " |
|
PRJ-44133, MBS-16004 |
Scalable Platforms |
Member state may flap between Active and Ready. |
|
PRJ-46223, PMTR-88316 |
Scalable Platforms |
During site failover, IPv6 traffic that goes through the Warp interface may be interrupted. |
|
PRJ-50827, PMTR-97227 |
Scalable Platforms |
In a rare scenario, file system corruption may lead to a failure identifying the Maestro Orchestrator hardware model during the Maestro Orchestrator OS boot process, causing the boot to fail. |
|
PRJ-44136, MBS-16756 |
Scalable Platforms |
If a DR packet arrives fragmented, it may not get forwarded to the DR manager, potentially causing connectivity issues. |
|
PRJ-46793, PMTR-92392 |
Scalable Platforms |
An additional reboot may be performed on Maestro Security Gateway because of the database entry (otlp) which should not be pulled from SMO. This entry is updated locally on each member via self-update functionality and therefore may differ between members. |
|
PRJ-52532, PMTR-99841 |
Scalable Platforms |
After dynamic routing manager failure and recovery, connections are dropped with a log message "TCP out of state: First packet isn't SYN". Refer to sk181874. |
|
PRJ-51186, PMTR-97932 |
Scalable Platforms |
In a rare scenario, when a Maestro Security Gateway is active again after a reboot, and LightSpeed is used, the LACP bond may drop incoming and outgoing packets. |
|
PRJ-55570, PMTR-105246 |
Scalable Platforms |
Traffic outage after policy installation on a Maestro Security Group in the Dual Site configuration. Refer to sk182379. |
|
PRJ-55518, PMTR-105145 |
Scalable Platforms |
Refer to sk182463. See Critical Information for R81.20 Jumbo Hotfix Accumulator. |
Take 65
Released on 03 June 2024 and declared as Recommended on 10 June 2024
|
ID |
Product |
Description |
|---|---|---|
|
Take 65 - Improvements and Resolved Issues |
||
|
PRJ-55471, PRHF-34219 |
VPN |
UPDATE: Remote Access VPN for local accounts authenticated only with Check Point password created in R80.20 or lower, and not updated after the upgrade to R80.30, is blocked until the password is reset. Refer to sk182336. |
|
PRJ-54099, PRJ-54459, ODU-1731, ODU-1667 |
Automatic Updates - Web SmartConsole |
UPDATE: New features and improvements are released in Take 100 and Take 102 via self-updatable package. Refer to sk170314. |
|
PRJ-55496, PRHF-34269 |
VPN |
CVE-2024-24919 - Security Gateway Information Disclosure. Refer to sk182336. |
|
PRJ-55345, PMTR-104752 |
Threat Prevention |
The "Categorized HTTPS Sites" option does not classify specific websites when "TLS 1.3 hybridized Kyber support" is enabled in the browser. Refer to sk182318. |
|
PRJ-54611 |
ClusterXL |
During an upgrade from R80.40 to R81.20 in a cluster environment, connectivity to the new member may be lost. See Critical Information for R81.20 Jumbo Hotfix Accumulator. |
|
PRJ-54482, PRHF-33823 |
Gaia OS |
Wrong interface names on the 9400 appliance after installing the R81.20 Jumbo Hotfix Accumulator Take 54. Refer to sk182265. See Critical Information for R81.20 Jumbo Hotfix Accumulator. |
|
PRJ-55322, PMTR-104713 |
Gaia OS |
After installing R81.20 Jumbo Hotfix Take 54 on Check Point Firewall 3600 / 3600T / 3800 appliances, CPView, Gaia Portal, and the " |
|
PRJ-53849, PRHF-33098 |
VPN |
After an update, if in VPN if configured with Permanent Tunnels enabled, RAM utilization may increase. |
|
PRJ-53184, PMTR-103617 |
Harmony Endpoint |
R81.20 Jumbo Hotfix Accumulator Take 43 (or higher) installation fails on the Endpoint Security Management Server with "Internal error in a hook script". Refer to sk182210. See Critical Information for R81.20 Jumbo Hotfix Accumulator. |
Take 54
Released on 08 April 2024
|
ID |
Product |
Description |
|---|---|---|
|
Take 54 - New Functionality |
||
|
PRJ-52942, PRJ-52484 |
Security Gateway |
NEW: This Jumbo Hotfix Take introduces support for new Check Point Firewall appliances 19100 / 9800 / 9700 / 9400 / 9300 / 9200 / 9100 appliances. Refer to sk181698 and to sk180520.
|
|
PRJ-49213, PMTR-94735 |
Security Gateway |
NEW: Added a new Expert mode command on the Security Gateway to revert the installed Access Control policy to one of the previous revisions: " |
|
PRJ-49827, ACCESS-799 |
Application Control |
NEW: Added ability to drop the traffic of specific UDP applications per packet. For example, the Security Gateway can now drop the specific commands and allow the other commands of the BACNet Protocol. This ability is enabled by default.
|
|
PRJ-53513, PRHF-30322 |
SecureXL |
NEW: It is now possible to configure additional TCP options in the Accelerated SYN Defender configuration file:
|
|
PRJ-47019, CRYPTOIS-2878 |
VPN |
NEW: Added support for a new tool (shell script) on a Management Server that can show and renew IKE certificates for VPN, Multi-Portal, and Identity Broker on all managed Security Gateways and VSX Virtual Systems. Refer to sk182070. |
|
PRJ-50987, PMTR-95463 |
VPN |
NEW: Added ability to track RAM usage of the VPND process using the " |
|
Take 54 - Improvements and Resolved Issues |
||
|
PRJ-50565, SDWANGW-1681 |
SD-WAN |
UPDATE: Added support for the AU (Australia) and IN (India) regions in Check Point Portal. |
|
PRJ-46069, SDWANM-822 |
SD-WAN |
UPDATE: SD-WAN Logs now appear in the dedicated SD-WAN log card in SmartView and SmartConsole. |
|
PRJ-48780, SL-8207 |
Security Management |
UPDATE: Added validation for new permissions to configure a script to run on the Security Gateway from Gateway object > Logs Alerts/Storage > the "Run the following script before deleting old files" option. |
|
PRJ-48124, CPM-5007 |
Security Management |
UPDATE: Creating a Domain via Management API now allows the allocation of the Domain IP address from a predefined IP address range on the Multi-Domain Security Management Server. |
|
PRJ-48096, PMTR-77299 |
CPView |
UPDATE: CPView now shows statistical data also for servers with 256/512 CPU cores. |
|
PRJ-50429, PMTR-96484 |
Security Gateway |
UPDATE: During certificate validation, the Security Gateway now retrieves the Certificate Revocation List (CRL) from all CRL distribution points (CDP) listed in certificate extensions. |
|
PRJ-50741, PRHF-30794 |
Security Gateway |
UPDATE: Added an ability to configure objects for the HTTPS Inspection CA using labels.
|
|
PRJ-50977, PRHF-31196 |
Threat Extraction |
UPDATE: Added an option in ICAP Server for logging benign files scanned by the Anti-Virus Software Blade. By default, logging for benign files is disabled. To enable it, add the entry " |
|
PRJ-50500, IDA-5167 |
Identity Awareness |
UPDATE: The identity synchronization from Policy Decision Point (PDP) to Smart-Pull Policy Enforcement Point (PEP) client now takes several seconds instead of a few minutes, especially beneficial in environments with a single PDP Security Gateway sharing to multiple PEP Security Gateways. |
|
PRJ-46626, PMTR-87439 |
VPN |
UPDATE: The "Server Authentication" attribute within the "Extended Key Usage" field is now included by default in IKE certificates generated by the Security Management Server. |
|
PRJ-50915, PRHF-31000 |
Gaia OS |
UPDATE: When a Gaia OS Server has a Cloning Group feature enabled, it now accepts other Gaia OS Servers that join this Cloning Group over TLS1.2 or higher (over the TCP port 1129). |
|
PRJ-53022, ODU-1468 |
Automatic Updates - Security Management |
UPDATE: Added Update 2 of Server-Side Change Report Generator Release Updates. Refer to sk179508. |
|
PRJ-52628, PRJ-53586, ODU-1571, ODU-1392 |
Automatic Updates - Web SmartConsole |
UPDATE: New features and improvements are released in Take 94 and Take 97 through self-updatable package. Refer to sk170314. |
|
PRJ-52696, ODU-1408 |
Automatic Updates - Smart-1 Cloud |
UPDATE: Added Update 7 of Smart-1 Cloud. Refer to sk166056. |
|
PRJ-52820, ODU-1491 |
Automatic Updates - CPView |
UPDATE: Added Take 34 of CPviewExporter Release Updates. Refer to sk180521. |
|
PRJ-52596, ODU-1499 |
Automatic Updates - CPView |
UPDATE: Added Take 77 of CPotelcol (OpenTelemetry Collector) Release Updates. Refer to sk180522. |
|
PRJ-52587, PRJ-53541, ODU-1476, ODU-1460 |
Automatic Updates - Threat Prevention |
UPDATE: Added Update 23 and Update 24 of Autonomous Threat Prevention Management integration Release. Refer to sk167109. |
|
PRJ-52867, PRJ-53688, ODU-1595, ODU-1531 |
Automatic Updates - HCP |
UPDATE: Added Update 15 and Update 16 of HealthCheck Point (HCP) Release. Refer to sk171436. |
|
PRJ-53397, PRJ-5368, ODU-1611, ODU-1563 |
Automatic Updates - CPSDC |
UPDATE: Added Take 31 and Take 33 of Check Point Support Data Collector (CPSDC) for Scalable Platforms and Maestro Security Appliances. Refer to sk164414. |
|
PRJ-50214, PRHF-30688 |
Security Management |
Packet mode search in SmartConsole may show rules that do not match the query if the query contains four or more filters. |
|
PRJ-51089, PRHF-31285 |
Security Management |
In some scenarios, the change report sent via email by SmartTasks after publishing appears blank, even though there were modifications in the published session. |
|
PRJ-50047, PRHF-30714 |
Security Management |
In High Availability environments, task progress notifications may get updated only every 5 minutes, even when the task is complete. |
|
PRJ-49953, PRHF-30373 |
Security Management |
Login to SmartConsole may fail while the Compliance Software Blade is running a full scan. |
|
PRJ-50797, PMTR-97183 |
Security Management |
When configuring an email address in SmartTasks, Top Level Domain (TLD) is limited to 3 characters, for example, " |
|
PRJ-51068, PRHF-31283 |
Security Management |
In a rare scenario, the FWK and CPD processes may exit with core dumps at approximately the same time. |
|
PRJ-51279, PMTR-97942 |
Security Management |
When the value of the "
|
|
PRJ-50355, PRHF-30825 |
Security Management |
SmartConsole may unexpectedly close after policy installation when SmartTasks return invalid characters from a user-defined script. |
|
PRJ-50436, PMTR-96433 |
Security Management |
The FWM process on the Management Server may unexpectedly exit, creating a core dump file. |
|
PRJ-49944, PRHF-30561 |
Security Management |
In environments with many network objects, SmartConsole may freeze while it loads the VPN tab of a Security Gateway object. |
|
PRJ-50405, PRHF-30796 |
Security Management |
In some scenarios, in SmartConsole, when clicking the picker to add Security Gateway to the "Install On" column in the Threat Prevention policy, no Security Gateway objects may appear. |
|
PRJ-50187, PRHF-30766 |
Security Management |
In some scenarios, Access Policy installation fails with "Policy load / verification failed because it required more than the maximum allowed memory of 4GB. Follow sk161874 to improve the performance and prevent excessive memory consumption". |
|
PRJ-45023, PRHF-28126 |
Security Management |
The Management API command" |
|
PRJ-50390, PRHF-30846 |
Security Management |
The $MDS_FWDIR/scripts/cpm_debug.sh script may fail with "The element type "Loggers" must be terminated by the matching end-tag "/Loggers"." |
|
PRJ-51074, PRHF-31280 |
Security Management |
Running a Gaia API command on the Security Gateway through the Management API from the Security Management Server fails when configuring the " |
|
PRJ-50851, PMTR-97291 |
Security Management |
Access Policy verification may fail when groups with exclusions are used in rules. |
|
PRJ-46935, PRHF-28412 |
SmartConsole |
Defining more than two hundred GUI clients causes the "Command Line" tab in SmartConsole to be grayed out and the " |
|
PRJ-49345, PMTR-95009 |
Security Management |
SmartConsole may unexpectedly close after deleting an object in the Object Explorer view. |
|
PRJ-47691, PMTR-93300 |
Security Management |
In some scenarios, an upgrade may fail if a scheduled IPS update occurs simultaneously with the upgrade or domain migration. |
|
PRJ-48916, PRHF-29502 |
Security Management |
In some scenarios, the Management API command " |
|
PRJ-50563, PRHF-30717 |
Security Management |
In environments with more than one hundred fifty administrators, SmartConsole may unexpectedly close when submitting changes for approval via Workflow. Refer to sk181649. |
|
PRJ-51134, PRHF-30631 |
Security Management |
Installing security policy with a rule that contains the "Internet" object in the destination column may fail with error message "Topology is not defined on the policy "Install On" target <cluster object name>", if the target cluster is marked as "Geo Mode in a Cloud". |
|
PRJ-50408, PRHF-30754 |
Security Management |
The Change Report generated before publishing a session, may contain internal system changes that were made by the user. |
|
PRJ-50580, PRHF-30902 |
Multi-Domain Security Management |
In rare scenarios, in a Multi-Domain Security Management environment:
|
|
PRJ-51665, PMTR-98552 |
Web SmartConsole |
An "Error logging into domain" message is displayed in Web SmartConsole when connecting to a Domain on a peer Multi-Domain Security Management Server. Refer to sk181801. |
|
PRJ-48003, PRHF-29744 |
CPView |
Offload may fail in CPView with " |
|
PRJ-44498, PMTR-90355 |
CPView |
In rare scenarios, CPView does not handle VS context correctly. |
|
PRJ-49974, PMTR-94928 |
CPView |
CPU statistics may be incorrect or missing in CPView. Refer to sk182286. |
|
PRJ-51064, PMTR-97643 |
CPUSE |
SmartConsole does not show all available packages for Security Gateways that run on the 15000 and 16000 Check Point appliances, even if these packages are located in the Package Repository on the Security Management Server. |
|
PRJ-47984, PRHF-29667 |
Logging |
Some Access Rule Base logs may be generated with a wrong interface direction. The issue is cosmetic only. |
|
PRJ-46288, PRHF-27161 |
Logging |
In SmartConsole, in the "Device License Information" view, the "New connection rate" field may indicate "please wait 10 seconds". |
|
PRJ-48806, SL-8218 |
Logging |
Some attributes in SNMP MIB file may not be accessible. |
|
PRJ-49390, PRHF-30398 |
Logging |
In SmartView, incorrect results may be displayed when filtering logs using the "src_machine_name" field. |
|
PRJ-46207, PRHF-27710 |
Logging |
Security Gateway forwards logs to the real IP address of the Management Server instead of the public (NATed) IP address. Refer to sk181609. |
|
PRJ-48242, PRHF-29837 |
Logging |
The "source", "destination", "user" and "action" fields are not exported when exporting logs with the "visible columns" option to CSV in the SmartView Web application. Refer to sk181706. |
|
PRJ-49499, PRHF-28245 |
Logging |
Duration of Log Sharing on-boarding or migration to Smart-1 Cloud may take a long time (up to two minutes). |
|
PRJ-53009, PRHF-32426 |
Logging |
The Syslog messages are not sent to the Security Management Server and cannot be seen in SmartLog if the Security Management Server IP address is not configured in the "Remote System Logging" section in the Gaia Portal. |
|
PRJ-44687, PRHF-27417 |
Logging |
When using Log Exporter to export logs to Splunk, a log entry in Splunk is split to separate lines if it contains the CRLF characters. |
|
PRJ-45297, PRHF-26975 |
Logging |
In a rare scenario, a Security Gateway / Cluster Member may stop logging locally or to configured Log Servers. Refer to sk170331. |
|
PRJ-47316, PRHF-29126 |
Logging |
When the active log file, for example, the fw.log for the Security Gateway is older than two days, the CPLogFilePrint utility does not print the log records correctly. |
|
PRJ-49736, PMTR-95580 |
Logging |
In rare cases, the LOG_EXPORTER process exits and the CPWD process does not start it because of the " |
|
PRJ-53337, PMTR-101195 |
Logging |
When the "IP Options drop" tracking Global Properties setting is configured to "Log" and the policy is installed, the Security Gateway drops traffic with disallowed IPv4 options or IPv6 extension headers, but no log is shown in SmartConsole. |
|
PRJ-52675, PRHF-32203 |
Security Gateway |
CVE-2023-51764 - Postfix SMTP Smuggling vulnerability. Refer to sk181944. |
|
PRJ-47957, PMTR-93503 |
Security Gateway |
The CPVIEW_API_SERVICE process may exit with a timeout. |
|
PRJ-52114, PMTR-98129 |
Security Gateway |
Incorrect CPU statics may be shown in CPView when using Dynamic Split. |
|
PRJ-52471, PMTR-98658 |
Security Gateway |
CIFS traffic may cause CPU spikes in the FWK process. |
|
PRJ-50761, PRHF-31092 |
Security Gateway |
On Security Gateways with enabled Hyper Flow feature, during policy installation and re-offload process of the connections, accelerated connections may be interrupted. Refer to sk181671. |
|
PRJ-53051, PMTR-100847 |
Security Gateway |
Security Gateway does not pass traffic through an external interface when it is managed by Smart-1 Cloud, and SecureXL works in User Mode (UPPAK) mode. Refer to sk182016. |
|
PRJ-46203, PRHF-25771 |
Security Gateway |
In rare scenarios, updating the NTP Server may cause a temporary outage. |
|
PRJ-50314, PMTR-96671 |
Security Gateway |
In a large environment, updating policy with 20000 IP addresses may take up to eighteen minutes. When publishing such changes, Data Center updates are not sent to the Security Gateway. |
|
PRJ-50660, PRHF-30938 |
Security Gateway |
The proxy IP address of users surfing HTTP sites may be displayed instead of the real source IP address. |
|
PRJ-50603, PRHF-28340 |
Security Gateway |
In some scenarios, the PDPD process may consume high CPU in the Identity Acquisition flow. |
|
PRJ-49807, PRHF-30576 |
Security Gateway |
Enabling MDPS in Gaia Clish fails with the " |
|
PRJ-50932, PMTR-94510 |
Security Gateway |
Multiple " |
|
PRJ-48322, PRHF-29953 |
Security Gateway |
The system may not automatically end or interrupt the RAD process if it takes longer than a specified timeout duration. |
|
PRJ-53290 |
Security Gateway |
In rare scenarios, during active HTTP streaming, the FWK process may unexpectedly exit due to memory corruption. |
|
PRJ-50140, PRHF-30588 |
Security Gateway |
Accounting info may not be displayed in logs for IPv6 Cluster VRRP environments. |
|
PRJ-47460, PRHF-29514 |
Threat Prevention |
In a rare scenario, there may be an unexpected reboot and a vmcore file generated in the /var/log/crash/ directory. |
|
PRJ-50050, PRHF-30177 |
Threat Prevention |
Security Gateway with a large number of CPU cores allocated to CoreXL SND may experience performance issues when an IoC Feed and the " |
|
PRJ-46444, PRHF-28775 |
Threat Prevention |
Files that undergo emulation while operating from a corporate location are transformed into PDF format. However, when the same files are accessed through a VPN remote client, they do not get the |
|
PRJ-43530, PMTR-87666 |
Threat Prevention |
When configuring an IoC Feed in SmartConsole, the "Test Feed" action does not support Full High Availability clusters. |
|
PRJ-46597, PRHF-29036 |
Threat Extraction |
The " |
|
PRJ-51423, PRHF-31468 |
Identity Awareness |
In a rare scenario, an Identity Gateway (PEP) becomes unresponsive while unregistering a network. |
|
PRJ-45136, PRHF-27966 |
Identity Awareness |
In Multi-User Host setups, some accounts may be identified as service accounts, although they should not be flagged. |
|
PRJ-45142, PMTR-90996 |
Identity Awareness |
A memory leak may occur in the PDPD process when storing new identities. |
|
PRJ-52495, PRHF-32042 |
Identity Awareness |
Setting custom configuration of PEP Identity Conciliation with the "Connect_Time" factor does not work as expected. |
|
PRJ-49534, PMTR-95032 |
Application Control |
In some scenarios, the Application Control and URL Filtering scheduled updates may occur more frequently than configured. |
|
PRJ-43457, PRHF-26010 |
Application Control |
When policy contains a white list, some packets may not match the listed applications. |
|
PRJ-49687, PMTR-95514 |
Application Control |
Anti-Spoofing drops packets that arrive at a Security Gateway through interfaces with Topology "External" if there are routes configured for internal interfaces that overlap with routes configured for external interfaces. Refer to sk181768. |
|
PRJ-42481, PRHF-26320 |
IPS |
Core IPS Protection "Unknown Resource Record" drops valid requests of specific DNS types. |
|
PRJ-49298, PRHF-23253 |
Anti-Virus |
Anti-Virus fails to release held connections after the inspection. |
|
PRJ-50529, PMTR-96396 |
Anti-Virus |
In a rare scenario, the Security Gateway may crash during inspection of file downloads. |
|
PRJ-49521, TPP-3592 |
Anti-Virus |
The Anti-Virus Software Blade may inspect files on an SMB appliance although the "SMB" checkbox is disabled on the matched profile. |
|
PRJ-49793, PRHF-30328 |
SSL Inspection |
Policy installation fails on the Security Gateway when using HTTPS Inspection with Hardware Security Module (HSM). |
|
PRJ-45151, PMTR-83342 |
SSL Inspection |
When HTTPS Inspection is enabled, the Security Gateway generates a log that includes the message "Certificate Chain is not signed by a Trusted CA" when an end-user connects to an HTTP site or a site with an untrusted SSL certificate. But, in some scenarios, the log does not include this text. |
|
PRJ-50870, PRHF-31176 |
ClusterXL |
The output of the " |
|
PRJ-52731, PRHF-32237 |
ClusterXL |
When working in ClusterXL mode with MDPS enabled on the cluster nodes, enabling a Cloning Group may get stuck in the "synchronizing" status. |
|
PRJ-52498, PMTR-99746 |
ClusterXL |
During a Multi-Version Cluster (MVC) upgrade, full synchronization between the upgraded member and another member may not function correctly. This can cause an interruption of IPv6 traffic. |
|
PRJ-48414, PRHF-29594 |
ClusterXL |
In a cluster connected to Smart-1 Cloud, local probing may start on the "maas_tunnel" interface, although it is not monitored by the cluster. Output of the Expert command " |
|
PRJ-51136, PRHF-31303 |
SecureXL |
The Security Gateway may crash with vmcore during boot while upgrading. |
|
PRJ-48761, PMTR-93332 |
SecureXL |
The port beacon feature also known as interface discovery or port blinking may not work correctly in User Mode (UPPAK). |
|
PRJ-50546, PRJ-50419 |
SecureXL |
High CPU utilization may be triggered when User Mode (UPPAK) and VPN are enabled under high load. |
|
PRJ-50950, PRHF-30474 |
SecureXL |
In some scenarios, the VSX Security Gateway may not be able to pass VPN encrypted traffic from one Virtual System to another Virtual System through a Virtual Router/Switch. |
|
PRJ-48284, PRHF-29906 |
SecureXL |
The " |
|
PRJ-50833, PMTR-96490 |
Routing |
The " |
|
PRJ-49579, PRHF-30498 |
Routing |
The CLI Parameters for the " |
|
PRJ-51347, PMTR-97885 |
VSX |
High CPU usage on SND cores when many interfaces are configured. Refer to sk181860. |
|
PRJ-50176, PRHF-30759 |
VSX |
In some scenarios, installing policy with the |
|
PRJ-46143, PRHF-28669 |
Gaia OS |
Taking a snapshot on the Security Management Server fails because of the error during copying the /boot/config/ content. |
|
PRJ-50487, PRHF-30667 |
Gaia OS |
SNMP query does not bring the CPUSE package information for a single OID (not a table). |
|
PRJ-48720, PRHF-29974 |
Gaia OS |
The Gaia Clish commaand " |
|
PRJ-50509, PRHF-30939 |
Gaia OS |
There may be some inconsistent syntax in the "comment" section for interface and static-route commands. |
|
PRJ-47177, PRHF-29200 |
Gaia OS |
When rebooting the Security Gateway, some VLANs may lose their IPv6 configuration. |
|
PRJ-51220, PMTR-92877 |
Gaia OS |
Clish may deny access of a non-local RADIUS user. |
|
PRJ-50692, PMTR-96606 |
Gaia OS |
Link may not come up automatically in the 2-Port 40G/100G NIC, 4-Port 10G/25G NIC, and 10G/25G Sync Port. Refer to sk181487. |
|
PRJ-45116, PRHF-28172 |
Gaia OS |
Lock database override may not work as expected when it is set via Ansible playbook, and another administrator was connected to SSH before that. |
|
PRJ-49218, PRHF-30327 |
VPN |
Redundant log prints in /var/log/messages file may be generated, although they should be printed only when the debug flags are enabled. |
|
PRJ-49560, PRHF-30457 |
VPN |
When using the " |
|
PRJ-53729 |
CloudGuard Network |
AWS CloudGuard Security Gateway boots into "Sh-4.4" shell after in-place upgrade to R81.20 with Jumbo Hotfix Accumulator from Take 38 to Take 53. Refer to sk182112. See Critical Information for R81.20 Jumbo Hotfix Accumulator. |
|
PRJ-50162, PMTR-91756 |
CloudGuard Network |
After installing this Take, after an out-of-memory event, the CloudGuard Controller will automatically restart with increased memory settings, and the "CloudGuard IaaS" log with the Description: "CloudGuard Controller is restarting with new memory settings" will be sent. |
|
PRJ-50161, PRHF-30734 |
Harmony Endpoint |
Due to a synchronization issue between the Policy Server and Primary Server, the Endpoint clients may be connected to the Primary Server instead of the Policy Server. |
|
PRJ-46991, PRHF-28944 |
VoIP |
In some scenarios, SIP TCP connections are dropped after a cluster failover. |
|
PRJ-47995, PRHF-29577 |
VoIP |
When the SIP Multi-core feature is enabled, and a SIP over UDP rule with one-way calls (only outgoing calls, for example) is defined, the returned traffic is dropped. Refer to sk181525. |
|
PRJ-49104, PMTR-93551 |
Scalable Platforms |
When creating a Security Group creation in Maestro Orchestrator Gaia Portal, and the password contains the " |
|
PRJ-48724, PMTR-67380 |
Scalable Platforms |
When running the " |
|
PRJ-52079, PMTR-99328 |
Scalable Platforms |
The Maestro Fastforward feature cannot be enabled when there is a bond interface with an ID consisting of two or three digits. |
|
PRJ-50738, PRHF-29610 |
Scalable Platforms |
The Gaia gClish command " |
|
PRJ-46064, PRHF-28410 |
Scalable Platforms |
Querying SP Interface Data via SNMP may intermittently fail. |
|
PRJ-50747, PRHF-30416 |
Scalable Platforms |
Performance data collected from all members including the Standby site, may cause the " |
|
PRJ-47762, PRHF-29491 |
Scalable Platforms |
Gaia Clish prompt does not appear after a TACACS user logs into a Maestro Security Group. Refer to sk181149. |
|
PRJ-50681, PRHF-30764 |
Scalable Platforms |
Scalable Platform Interface data OIDs (1.3.6.1.4.1.2620.1.48.26) may not be refreshed. |
|
PRJ-48930, PMTR-92547 |
Scalable Platforms |
Connectivity issues may occur in a Maestro Security Group when VLAN encapsulation is disabled on Orchestrators in a Maestro Dual Site environment. Refer to sk181385. |
Take 53
Released on 17 March 2024 and declared as Recommended on 03 April 2024
|
ID |
Product |
Description |
|---|---|---|
|
Take 53 - Improvements and Resolved Issues |
||
|
PRJ-52910, PMTR-100960 |
Security Gateway |
The Security Gateway with 40 cores fails to boot in Kernel Mode Firewall. Refer to sk181989. See Critical Information for R81.20 Jumbo Hotfix Accumulator. |
|
PRJ-53592 |
Security Gateway |
Security Gateway with Anti-Virus enabled may sporadically crash because of memory corruption. See Critical Information for R81.20 Jumbo Hotfix Accumulator. |
|
PRJ-53367, PRHF-32706 |
VPN |
VPN IKEv2 negotiation with a third party peer may fail when the peer offers multiple combined encryption algorithms in one proposal. For example, AWS by default offers AES-GCM and AES-GCM-256. The issue triggers an IKE failure log. Refer to sk114834. See Critical Information for R81.20 Jumbo Hotfix Accumulator. |
|
PRJ-52984, PMTR-99552 |
Scalable Platforms |
In a VSX environment, LACP Bond traffic may fail with the "incomplete ARP" error. See Critical Information for R81.20 Jumbo Hotfix Accumulator. |
|
PRJ-53413, PRJ-53287 |
Scalable Platforms |
In a Maestro environment, after installing Jumbo Hotfix Accumulator and a reboot, members may intermittently go down due to MAC flapping. |
Take 45
Released on 30 January 2024
|
ID |
Product |
Description |
|---|---|---|
|
Take 45 - Improvements and Resolved Issues |
||
|
PRJ-52492, PMTR-99615 |
ClusterXL |
The CXLD process may consume the CPU at 70%-100% on VSX cluster members. Refer to sk181891. See Critical Information for R81.20 Jumbo Hotfix Accumulator. |
|
PRJ-52559, PMTR-100084 |
Security Gateway |
When in the NAT Rule Base there are domain objects with uppercase letters, the NAT rules may not be matched. See Critical Information for R81.20 Jumbo Hotfix Accumulator. |
Take 43
Released on 08 January 2024
|
ID |
Product |
Description |
|---|---|---|
|
Take 43 - New Functionality |
||
|
PRJ-50012, PRJ-49119, PMTR-94679, PMTR-94786 |
Security Management |
NEW: Added support for Spark Firewall Appliances 1900/2000 for EA (Early Availability) customers. |
|
PRJ-48759, PRJ-51416 |
SD-WAN |
NEW: Added SD-WAN local breakout and VPN overlay support for Security Gateways with dynamic IP addresses. |
|
PRJ-47122, PMTR-92660 |
Anti-Spam |
NEW: We have extended the grace period of Anti-Spam Software Blade to support you for 90 days following contract expiration to continue providing the best security value during the renewal process. |
|
Take 43 - Improvements and Resolved Issues |
||
|
PRJ-45065, PRHF-28095 |
Security Management |
UPDATE: Added support for scheduling automatic purges of the System Data domain. |
|
PRJ-46326 |
Security Management |
UPDATE: Added support for the VPN certificate alert feature for Spark Firewall Appliances R81.10.X. |
|
PRJ-47499, PMTR-92999 |
Security Management |
UPDATE: Added a new API version (1.9.1). Refer to Management API Reference. |
|
PRJ-52357, ODU-1400 |
CPView |
UPDATE: Added Take 74 of CPotelcol (OpenTelemetry Collector) Release Updates. Refer to sk180522. |
|
PRJ-48300, PMTR-93298 |
SmartConsole |
UPDATE: Added a pop-up message explaining that it is not possible to add an exception to a Global Domain policy from a local Domain when clicking "Add Exception" in a Global rule.
|
|
PRJ-49364, PRHF-28875 |
Security Gateway |
UPDATE: Previously, in the "Hide NAT behind IP Address Range" feature, only the source IP address determined the Hide NAT IP address from the IP Address Range. It is now possible to configure the Security Gateway to select the Hide NAT IP address based on the combination of the source IP address and the source port. Refer to sk105302. |
|
PRJ-46317, PMTR-92164 |
Security Gateway |
UPDATE: When changes are made to updatable objects within a policy and a missing or corrupted package is detected, the policy installation will fail, resulting in the generation of a log. |
|
PRJ-46558, PMTR-92206 |
Security Gateway |
UPDATE: Added a new option in |
|
PRJ-48447, PMTR-94030 |
Threat Prevention |
UPDATE: Improved the parser of Custom Intelligence feeds to support values written in "Camel case", where multiple words are combined without spaces, and each word begins with a capital letter. |
|
PRJ-51511, ODU-1248 |
Threat Prevention |
UPDATE: Added Update 22 of Autonomous Threat Prevention Management integration Release. Refer to sk167109. |
|
PRJ-48139, PMTR-93683 |
Threat Prevention |
UPDATE: Re-enabled the deprecated feature of exporting/importing Custom Intelligence feeds. |
|
PRJ-43434, PRHF-26673 |
Threat Prevention |
UPDATE: It is now possible to add exceptions to external Custom Intelligence feeds. |
|
PRJ-47916, AVIR-1544 |
Anti-Virus |
UPDATE: Improved Anti-Virus caching mechanism to prevent generating malicious sub-domains in Background resource categorization mode. |
|
PRJ-49233, PMTR-92549 |
SSL Network Extender |
UPDATE: SSL Network Extender was updated to version 80008407. |
|
PRJ-44244, PMTR-87141 |
Mobile Access |
UPDATE: Enhanced PushReport (a troubleshooting tool for Mobile Access Software Blade):
|
|
PRJ-46316, PMTR-90870 |
ClusterXL |
UPDATE: When enabling the VMAC feature, the Link Monitoring on the cluster members is now configured automatically. |
|
PRJ-45338, PMTR-88036 |
VPN |
UPDATE: Added SAML authentication support for Capsule Connect / Capsule VPN. |
|
PRJ-41132, PMTR-86206 |
VSX |
UPDATE: In VSX, removed the redundant option to change CoreXL mode from USFW to Kernel mode. |
|
PRJ-48109, PMTR-90795 |
VSX |
UPDATE: Changed the "
|
|
PRJ-50874, PMTR-97129 |
Gaia OS |
UPDATE: Upgraded OpenSSL from 1.1.1u to 1.1.1w to include the latest security improvements. |
|
PRJ-48011, PRHF-29711 |
Gaia OS |
UPDATE: The output of " |
|
PRJ-50198 |
Gaia OS |
UPDATE: Gaia API updates is now installed automatically through AutoUpdater. Refer to sk165653. |
|
PRJ-45237, PRHF-28236 |
Gaia OS |
UPDATE: SNMP traps for interfaces going up and going down now contains the interface name and description. |
|
PRJ-50604, PMTR-97169 |
Harmony Endpoint |
UPDATE: Posture Management (Vulnerability & Patch Management) is now supported. |
|
PRJ-45728, PMTR-91551 |
Harmony Endpoint |
UPDATE: Added new file types supported by Harmony Endpoint Threat Emulation Software Blade. |
|
PRJ-48082, PRHF-29774 |
CloudGuard Network |
UPDATE: Added support for Azure Scale sets with Flexible orchestration mode. |
|
PRJ-47189, PRHF-28352 |
CloudGuard Network |
UPDATE: Added the "namespace" label to pods in Kubernetes Data Center. |
|
PRJ-48098, PRHF-28329 |
CloudGuard Network |
UPDATE:
|
|
PRJ-48764, PMTR-94130 |
CloudGuard Network |
UPDATE: Added support for Data Centers in AWS "il-central-1" Israel (Tel Aviv) region. |
|
PRJ-49997, PMTR-95965 |
CloudGuard Network |
UPDATE: Updated the Jetty server libraries for CloudGuard Controller to provide enhanced stability, security, and performance. |
|
PRJ-45772, PMTR-90618 |
Scalable Platforms |
UPDATE: Added the ability to stop configuration mismatch repeated reboots for debugging purposes. The new command is " |
|
PRJ-48197, PMTR-91032 |
Scalable Platforms |
UPDATE: Added ability to use Generic Data Centers and Dynamic Objects with Maestro cluster, not just for a separate Security Gateway. |
|
PRJ-47962, PRJ-47560 |
IoT |
UPDATE: Enabled new docker capabilities on IoT Gateways. |
|
PRJ-47170, PRHF-29222 |
Security Management |
In rare scenarios, Global Policy reassignment fails with "IPS Update Failed On Assign". |
|
PRJ-48898, PRHF-30157 |
Security Management |
In rare scenarios, upgrade of the Security Management Server to R81.20 fails with the "Task was interrupted because of server restart" and "DEADLOCK IN POSTGRES DETECTED!!!" messages in the $FWDIR/log/cpm.elg log file. |
|
PRJ-46700, PRHF-24917 |
Security Management |
Global Policy assignment fails if it is configured to assign to specific Domain policies and one of these local Domain policies is deleted. |
|
PRJ-42640, PRHF-24486 |
Security Management |
In some scenarios, an automatic Trusted Certificate Authorities (CAs) update fails. |
|
PRJ-42936, PRHF-25050 |
Security Management |
When closing an application from SmartConsole without changes, a redundant revision is created. |
|
PRJ-46004, PRHF-28590 |
Security Management |
Changing the cluster mode via the Management API command " |
|
PRJ-46829, PRHF-28923 |
Security Management |
In some scenarios, the "Object is no longer available" validation warning appears for updatable objects. |
|
PRJ-45989, PRHF-28558 |
Security Management |
Deleting a Domain that is connected to an AD Group fails. |
|
PRJ-46014, PRHF-28592 |
Security Management |
The Management API command " |
|
PRJ-45035, PRHF-27706 |
Security Management |
Upgrade of a Security Management Server or a Multi-Domain Security Management Server with over 2000 NAT rules may take over 10 hours to complete.
|
|
PRJ-44988, PRHF-28001 |
Security Management |
A migrate export or CPUSE upgrade of a Security Management Server fails if a Rule Base contains more than 35,000 rules. Refer to sk178325 to check the recommended size of Rule Bases. |
|
PRJ-47620, PRHF-29494 |
Security Management |
In rare scenarios, the /var/log/message file is filled with Clish login messages for the Admin user. |
|
PRJ-48865, PRHF-30091 |
Security Management |
In multi-site Multi-Domain Security Management environments, login to SmartConsole fails if the "Read_Write_All_Profile" permission profile is deleted. |
|
PRJ-45800, PRHF-28187 |
Security Management |
Security Management Server import fails with the "Tried to persist object XXX with domain YYY while active domain is ZZZ" error in the upgrade report. |
|
PRJ-47043, PRHF-29223 |
Security Management |
When using the RADIUS username for authentication, login to SmartConsole may fail. |
|
PRJ-47047, PRHF-29104 |
Security Management |
In rare scenarios, after an upgrade, the Security Management Server may fail to start. |
|
PRJ-47012, PRHF-29254 |
Security Management |
The Management API command " |
|
PRJ-46656, PRHF-24236 |
Security Management |
When the Access Rule Base contains several hundred rules, the Management API command " |
|
PRJ-46732, PRHF-28910 |
Security Management |
In rare scenarios, opening the Install Policy view gets timed out, and SmartConsole unexpectedly closes. Refer to sk181397. |
|
PRJ-41549, PRHF-25551 |
Security Management |
QoS policy cannot be installed if the policy package name contains a dot symbol. |
|
PRJ-48818, PRHF-20141 |
Security Management |
In the Revisions view, when comparing the selected revision to its previous revision, an empty screen is shown instead of a report. |
|
PRJ-47967, PRHF-29565 |
Security Management |
In High Availability Security Management Server environments, outdated IPS packages are retained, which leads to a substantial increase of the database on Standby Security Management Server. Refer to sk182178. |
|
PRJ-48788, PRHF-30027 |
Security Management |
SmartConsole may unexpectedly close after clicking "Install Policy" while the Compliance Software Blade is running a full scan. |
|
PRJ-49226, PRHF-30300 |
Security Management |
In some scenarios, an upgrade of the Security Management Server may fail if the import is running at 12 AM.
|
|
PRJ-48442, PRHF-30005 |
Security Management |
The " |
|
PRJ-45899, PRHF-28666 |
Security Management |
In rare scenarios, during an IPS update, a task notification reports that a database purge failed on the Standby Security Management Server. Refer to sk180920. |
|
PRJ-44801, PMTR-82908 |
Security Management |
In rare scenarios, the |
|
PRJ-48371, PRHF-29850 |
Security Management |
The "crldp_initialized" and "crldp_name" keys may be missing in the registry after running " |
|
PRJ-45783, PRHF-27471 |
Security Management |
In rare scenarios, the High Availability synchronization status shows "NGM failed to import data", and then is cleared automatically within 15 minutes. |
|
PRJ-47259, PRJ-47236, PRHF-29374, PRHF-29423 |
Security Management |
If the HTTPS policy contains an Identity Awareness Gateway object in the "Source"/"Destination" column, policy installation may fail when selecting more than one policy target. Refer to sk181097. |
|
PRJ-43290, PRHF-26909 |
Security Management |
In rare scenarios:
|
|
PRJ-46783, PRHF-28958 |
Security Management |
In an environment with many Security Gateways, SmartConsole may unexpectedly close when selecting a policy package to install. |
|
PRJ-48201, PRHF-29851 |
Security Management |
Login via API fails if the Security Management Server has multiple IP addresses and they are not defined on the Security Management Server object in SmartConsole. |
|
PRJ-48038, PRHF-29549 |
Security Management |
An audit log may not be created after running Revert to Revision. |
|
PRJ-49371, PRHF-30255 |
Security Management |
In environments with tens of thousands of network objects, opening and closing Security Gateway objects in SmartConsole takes a long time. Refer to sk181460. |
|
PRJ-49196, PRHF-30329 |
Security Management |
In some scenarios, the CPRLIC process may unexpectedly exit without affecting the connectivity, and a core dump is generated. |
|
PRJ-48382, PRHF-29957 |
Security Management |
In SmartConsole, export of policies with the "Hit count" column may get stuck. |
|
PRJ-48692, SL-8197 |
Security Management |
Users may be able to configure user-defined scripts to run on the Security Management Server, although they do not have the permissions of a super-user. |
|
PRJ-46411, PMTR-90123 |
Security Management |
The Security Gateway may listen to the ports used by NAT. |
|
PRJ-50359, PRHF-30763 |
Security Management |
In multi-site environments, when using LDAP administrators configured on an external LDAP Server, logging into Domains on different Multi-Domain Security Management Servers in parallel, synchronization may fail with the "failed to import data" status. |
|
PRJ-50817, PRHF-31173 |
Security Management |
In some scenarios, if a DAIP Gateway is registered to a VPN Community:
|
|
PRJ-49715, PRHF-30513 |
Security Management |
In rare scenarios, in a Multi-Domain Security Management environment:
|
|
PRJ-48705, PRHF-29307 |
Security Management |
In some scenarios, in High Availability Security Management Server environments, there may be increase of the database on the Security Management Server. |
|
PRJ-49884, PRHF-30289 |
Security Management |
Export of the Security Management Server may fail with "Could not find workSession WORKSESSION_UID in worksession's List" message in the upgrade report. |
|
PRJ-48162, PMTR-93236 |
Security Management |
The Management API command " |
|
PRJ-42955, PMTR-88417 |
Security Management |
Application Control and IPS updates may take a long time. |
|
PRJ-45441, PRHF-28361 |
Security Management |
In rare scenarios, Global Policy Reassignment takes a long time to complete after deleting a Global IPS profile. Refer to sk180787. |
|
PRJ-48795, PRJ-48796 |
Multi-Domain Security Management |
When connecting with SmartConsole to a Domain in a Multi-Domain Management environment, object pickers in Threat Prevention policy may not show available objects. |
|
PRJ-49480, PRHF-29987 |
Multi-Domain Management |
When viewing Subordinate CA objects in SmartConsole:
The fix requires R81.20 SmartConsole Releases Build 651 (or higher). |
|
PRJ-47039, PRHF-29235 |
Multi-Domain Security Management |
In multi-site Multi-Domain Security Management environments, login to SmartConsole fails while an Install Policy Preset relays the Security Gateway installation statuses. |
|
PRJ-49715, PRHF-30513 |
Multi-Domain Security Management |
In rare scenarios, in a Multi-Domain Security Management environment:
|
|
PRJ-46105, PRHF-28809 |
Multi-Domain Security Management |
In some scenarios, the "Uninstall Threat Prevention Policy" window may show "no candidates found for operation", even though there are Security Gateways that have Threat Prevention policy installed and Threat Prevention is disabled in the Security Gateway editor. Refer to sk180983. |
|
PRJ-43692, PRHF-27130 |
Multi-Domain Management |
Deleting the entire Domain including all its Domain Servers fails, if any of the Domain Servers is used in the Domain policy. |
|
PRJ-51427, PMTR-98332 |
Web SmartConsole |
Login with Web SmartConsole to the Security Management Server may fail if using a trusted client with IPv6. |
|
PRJ-46436, PRHF-28762 |
SmartProvisioning |
After importing or deleting SNORT protections in the IPS Protections view, the view may not show the change.
|
|
PRJ-47343, PRHF-29472 |
SmartView |
In some scenarios, when a language other than English is chosen in SmartView, login to SmartView fails with an "Initialization failed" message. |
|
PRJ-47470, PMTR-92958 |
CPUSE |
Tasks in SmartConsole may end unexpectedly during the Jumbo/ major version upgrade operation. |
|
PRJ-50726, PMTR-96971 |
SD-WAN |
After Jumbo Hotfix Accumulator installation, the connection in the IoT environment stays down. |
|
PRJ-45325, PMTR-79944 |
Logging |
Configuring log settings to delete logs if free disk space is lower than a certain percentage may not be applied. |
|
PRJ-45041, PRHF-28139 |
Logging |
The "Low disk space" warning may be incorrectly displayed in SmartConsole. |
|
PRJ-48341, PMTR-93310 |
Logging |
In some scenarios, the Management API command " |
|
PRJ-46742, PRHF-28812 |
Logging |
In some scenarios, implied rules are not logged for clusters. |
|
PRJ-47220, PRHF-29347 |
Logging |
The " |
|
PRJ-46702, SL-6793 |
Logging |
The Logs view may show a "Failed to read record number" message. |
|
PRJ-44208, PRHF-27544 |
Logging |
Windows Syslog messages information may be displayed in the "Description" field of the log and not parsed into the suitable fields. |
|
PRJ-47809, PRHF-25147 |
Logging |
The Management API commands " |
|
PRJ-46841, PRHF-29149 |
Logging |
In SmartView, filtering logs by Media Encryption & Port Protection Software Blade may fail. |
|
PRJ-46187, PRHF-28421 |
Logging |
When the CPD process is automatically restarted on the Security Gateway, the output of the "cpstat ls -f logging" command on the Security Management shows the Security Gateway is disconnected, the Log Server cannot be reached, although logs are sent. |
|
PRJ-48728, PMTR-93770 |
Logging |
In some scenarios, the Log Sharing status may show an error in exporting the logs, although logs are correctly shared to the cloud. |
|
PRJ-45607, PMTR-90654 |
Logging |
In some scenarios, in the Logs view, the "Destination" field may be missing. The issue is only cosmetic. |
|
PRJ-46742, PRHF-28812 |
Logging |
In some scenarios, implied rules are not logged for clusters. |
|
PRJ-49141, SL-7477 |
Logging |
In some scenarios, in a Smart-1 Cloud environment, login to SmartView may fail. |
|
PRJ-48272, PMTR-93819 |
Security Gateway |
Following the installation of R81.20 Jumbo Hotfix Accumulator Take 26, it is impossible to configure a new Maestro group via the Gaia Portal. |
|
PRJ-51226, PMTR-98012 |
Security Gateway |
In some scenarios, policy installation may fail. The $FWDIR/log/fwk.elg and the $FWDIR/log/dmd.elg files show correlating errors. |
|
PRJ-45694, PRHF-28403 |
Security Gateway |
The VPND, CVPND, and PDPD processes on the Security Gateway may become non-responsive and cause SAML authentication for Remote Access VPN users to fail. |
|
PRJ-49865, PRHF-30556 |
Security Gateway |
After approximately 24 hours after a reboot, memory utilization starts at 30-40% utilization and gets to 80% utilized. This leads to issues with loading web pages and may cause an outage. |
|
PRJ-46482, PRHF-28857 |
Security Gateway |
The output of the " |
|
PRJ-48810, PRHF-29932 |
Security Gateway |
VPN tunnel between the Security Gateways with Link Selection and Remote Desktop Protocol (RDP) may fail after policy installation. Refer to sk181481. |
|
PRJ-48023, PMTR-91868 |
Security Gateway |
In some scenarios, when IPS is enabled, CPU spikes may occur. |
|
PRJ-48823, PRHF-29853 |
Security Gateway |
In some scenarios, a misconfiguration on a DNS Server may lead to exhaustion of ephemeral ports on the Security Gateway. |
|
PRJ-41968, PRHF-25829 |
Security Gateway |
When adding another loopback interface in an MDPS environment, it is shown in MPLANE and not in DPLANE as expected. |
|
PRJ-47149, PMTR-92710 |
Security Gateway |
Enlarging MTU may cause even small packets to be allocated as Jumbo frames. This impacts the performance of SNDs CPUs. |
|
PRJ-47210, PRHF-29194 |
Security Gateway |
When running the |
|
PRJ-44702, PRHF-27451 |
Security Gateway |
In rare scenarios, the WSDNSD process may restart because of an internal error. |
|
PRJ-48154, PRHF-29602 |
Security Gateway |
Topology and Anti-Spoofing ranges are not calculated on an external interface when adding a route to an internal interface that shares the same subnet. |
|
PRJ-47304, PMTR-86113 |
Security Gateway |
The /var/log/messages file of a VSX gateway is flooded with the "fwmultik_predefined_dispatching: BAD_MULTIK_TAG" messages with no impact of the connectivity. Refer to sk181281. |
|
PRJ-47521, PRHF-29318 |
Security Gateway |
After installing a policy, because of high latency, the Security Gateway may delete connection before SIM Affinity is able to send an update notification. This may cause some connections to be dropped. |
|
PRJ-47332, PMTR-92600 |
Security Gateway |
When using the " |
|
PRJ-46378, PMTR-84794 |
Security Gateway |
Re-mirrored traffic may be re-ordered in the Mirror & Decrypt feature. |
|
PRJ-47269, PRHF-29384 |
Security Gateway |
Latency in loading websites when using Security Gateway as a Proxy with HTTPS Inspection enabled. Refer to sk180673. |
|
PRJ-44856, PRHF-27465 |
Security Gateway |
Web Security parsing error "illegal header format detected: Missing quotation mark" of content-disposition header - that contains a filename* parameter or an unquoted parameter. |
|
PRJ-47326, PMTR-75350 |
Security Gateway |
Benign files scanned by the ICAP Server may not be logged by Anti-Virus Software Blade. |
|
PRJ-45341, PRHF-28058 |
Security Gateway |
When two routes with similar attributes are added to different routing tables, and one is deleted, Anti-Spoofing may drop the traffic to that route. |
|
PRJ-47371, PMTR-88610 |
Security Gateway |
The ICAP Server may stop sending files to the Threat Emulation and Anti-Virus Software Blades if the TED daemon was restarted. |
|
PRJ-43857, PMTR-83014 |
Security Gateway |
The FWK process may unexpectedly exit with a core dump file when removing an IPv6 interface on VSX. |
|
PRJ-45484, PRHF-27892 |
Security Gateway |
Incorrect bonds may be shown in the Data Plane when using MDPS with the " |
|
PRJ-44619, PRHF-27190 |
Security Gateway |
In a rare scenario, the FWD process listens to high ports that are not blocked by the " |
|
PRJ-47559, PRHF-29583 |
Security Gateway |
FTP connection may fail in Port mode with NAT and specific FTP clients. Refer to sk181165. |
|
PRJ-47603, PRHF-29572 |
Internal CA |
In rare scenarios, ICA certificate creation and enrollment fail. |
|
PRJ-46838, PMTR-92384 |
Threat Prevention |
When SSH Deep Packet Inspection (SSH DPI) is enabled, the Security Gateway may have SSH connectivity issues because of an incorrect choice of Message Authentication Code (MAC) algorithm during the SSH handshake. |
|
PRJ-47637, PRHF-29215 |
Threat Prevention |
The output of the " |
|
PRJ-43728, PMTR-89275 |
Threat Prevention |
In some scenarios, CIFS parser is triggered when it is not needed, this leads to the Security Gateway not accelerating fully the SMB traffic. |
|
PRJ-48847, PMTR-88858 |
Threat Prevention |
Anti-Virus Software Blade triggers the "Detect" logs for DNS traffic, although these malicious DNS requests were prevented. |
|
PRJ-44692, PRHF-27890 |
Threat Prevention |
In some scenarios, the Security Gateway fails to export or import Custom Intelligence feeds. |
|
PRJ-46720, PMTR-92083 |
Threat Prevention |
Uploading an IoC file containing invalid characters (for example, quotation marks) may cause Threat Prevention policy installation failure. |
|
PRJ-44767, PRHF-27722 |
Threat Prevention |
Fetching of Custom Intelligence feeds fails when no proxy is configured on the Security Gateway. |
|
PRJ-46118, PMTR-91889 |
Threat Emulation |
Multiple |
|
PRJ-48192, PRHF-29760 |
Threat Prevention |
Anti-Virus Software Blade fails to parse external Custom Intelligence feeds that contain specific delimiters. |
|
PRJ-48745, PMTR-88384 |
Threat Prevention |
Anti-Virus fails to block Custom Intelligence feeds that contain percent-encoding. |
|
PRJ-50556, PRHF-30793 |
Threat Prevention |
In rare scenarios, CPU utilization can reach high levels because the Multi-Queue affinity of interfaces that use the "mlx5_core" driver is not configured correctly during the boot process. |
|
PRJ-49624, PMTR-83371 |
Threat Prevention |
TP_CONF_SERVICE is shown as "running" or "terminated" in VSW (Virtual Switch) context, although it should not be running at all. Refer to sk183494. |
|
PRJ-48430, PMTR-93558 |
Threat Prevention |
Some connections may be dropped because of an issue in IPS inspection, which can be resolved by installing/fetching a local policy. |
|
PRJ-48268, PRHF-29756 |
Threat Prevention |
URL observables with question marks "?" are not parsed correctly by the Threat Prevention Custom Intelligence feeds feature. Refer to sk181367. |
|
PRJ-49009, PMTR-92233 |
Threat Prevention |
In a rare scenario, when cloning SGM in Maestro, the FWD process may exit during an IPS/Anti-Virus/Anti-Bot package update. |
|
PRJ-45902, PMTR-91000 |
Threat Prevention |
The "Exception Handling" option for Observables in Threat Prevention indicator may not be applied. |
|
PRJ-46905, PRHF-29115 |
Threat Prevention |
The " |
|
PRJ-48087, PMTR-93601 |
Threat Prevention |
An outage may occur when an unsupported SSH cipher is selected. |
|
PRJ-47447, PRHF-29413 |
Threat Prevention |
When configuring Custom Intelligence feeds from the management:
|
|
PRJ-46759, PRHF-28441 |
Identity Awareness |
The |
|
PRJ-47442, PMTR-92960 |
Identity Awareness |
In a rare scenario, when Identity Broker is configured, a memory leak in the PDPD process may occur during policy installation. |
|
PRJ-48275, PRHF-29815 |
Identity Awareness |
There may be no access to resources for identities received from the Remote Access identity source by splitting Domain (sk147417). |
|
PRJ-49045, PRHF-30082 |
DLP |
The DLP process may unexpectedly exit during policy installation. |
|
PRJ-49898, PMTR-95150 |
SSL Inspection |
In rare scenarios, the WSTLSD process may unexpectedly exit and create core dump files. |
|
PRJ-47065, PMTR-92599 |
Application Control |
When the "Categorize HTTPS Websites" option is enabled and the global parameter " |
|
PRJ-45721, PRHF-27843 |
Application Control |
Policy installation fails when a custom application and user category have the same name. |
|
PRJ-46199, PMTR-85660 |
Application Control |
CPView and the ' |
|
PRJ-47750, PRJ-47646 |
IPS |
In rare scenarios, there may be a memory leak in |
|
PRJ-47555, PRHF-29458 |
Anti-Virus |
Loading a large Custom Intelligence feed may fail. Refer to sk181158. |
|
PRJ-45837, TPP-3445 |
Anti-Virus |
DLPU process memory consumption may be increased when SMB protocol is enabled in the Anti-Virus policy. |
|
PRJ-47936, PRHF-29090 |
Anti-Virus |
When transferring many files, SMB traffic may freeze while scanned by Anti-Virus Software Blade. |
|
PRJ-48128, PMTR-93685 |
Anti-Virus |
A memory leak in the DLPU process may occur when Anti-Virus scans files over HTTP(s) or SMB (Server Message Block) protocol. |
|
PRJ-47785, PRHF-29581 |
Anti-Virus |
A memory leak may occur in the Security Gateway when a connection is not correctly released after the inspection. |
|
PRJ-48973, PRHF-30090 |
Anti-Virus |
When Anti-Virus DNS classification is set to Hold mode, the first DNS trap log of malicious Domains shows "Detect" in the Action field, although the connection was successfully blocked. |
|
PRJ-47240, PRHF-29289 |
Anti-Virus |
Some websites may be unreachable when one of Threat Prevention Software Blades is in Hold mode. |
|
PRJ-50430, PMTR-96334 |
Anti-Bot |
In rare scenarios, when the IPS or Anti-Bot Software Blades are enabled, Threat Prevention logs with packet captures appear in SmartConsole without details. |
|
PRJ-47183, PRHF-29248 |
SSL Inspection |
The Security Gateway may fail to enforce certificate blacklisting. |
|
PRJ-47204, PRHF-29309 |
Mobile Access |
When copying special German characters to and from the Guacamole Server, they are replaced with unreadable symbols. |
|
PRJ-47108, PRHF-29247 |
Mobile Access |
It may not be possible to connect to the RDP application with SNX in Application mode. Refer to sk181155. |
|
PRJ-43928, PMTR-89813 |
ClusterXL |
Site to Site VPN outage on ClusterXL Active member when running " |
|
PRJ-44276, PRHF-27346 |
ClusterXL |
A Standby member may initiate FTP data connection, although it should be sent from the Active member. As a result, the connection is teminated. Refer to sk180531. |
|
PRJ-45199, PRHF-28013 |
ClusterXL |
In a cluster/Maestro in Load Sharing mode, the Security Gateway may drop NAT traversal traffic with "fwmultik_process_f2p_cookie_inner Reason: PSL Drop: No connection". |
|
PRJ-43607, PRHF-25160 |
ClusterXL |
When interfaces disconnect/connect on both members at the same time, it may cause a failover. |
|
PRJ-49758, PMTR-95601 |
SecureXL |
Multicast restrictions set in SmartConsole may be bypassed if varying restrictions are configured for different interfaces. |
|
PRJ-50927, PMTR-97095 |
SecureXL |
When attempting to route packets to unresponsive hosts, the CPU utilization may be high. |
|
PRJ-44735, PMTR-70190 |
SecureXL |
The "IOCTL command CPHWD_IOCTL_DOS_DENY_LIST_CLEAR was not successful" error may be printed during |
|
PRJ-51290, PMTR-97193 |
SecureXL |
In some scenarios, traffic may not pass through a Virtual System on a VSX Security Gateway when it originally came through a Virtual Switch and User Mode (UPPAK) was enabled. |
|
PRJ-49960, PMTR-95764 |
Routing |
During the processing of PIM Join-Prune messages, the absence of prior ({},G) state prevents the processing of (S,G) joins for the same group, even when present in the message. |
|
PRJ-49237, PMTR-94838 |
Routing |
When one of the multiple PIM neighbors goes down on the LAN,there may be outages in multicast traffic. |
|
PRJ-47488, PMTR-93015 |
Routing |
When multicast traffic for an existing (S,G) entry arrives at a non-IIF interface, the entry may be deleted and re-added when the next multicast packet is released, although the entry should not be deleted. |
|
PRJ-43249, ROUT-2018 |
Routing |
Traffic may be dropped when there are many OSPF routes of type 5. |
|
PRJ-47802, PRHF-29662 |
Routing |
When a BFD session is added or removed, disabled sessions may incorrectly come up. |
|
PRJ-47941, PMTR-93492 |
Routing |
An OIF entry may be missing when multiple downstream neighbors are present on a LAN. Refer to sk181354. |
|
PRJ-48118, PRHF-29848 |
Routing |
The ROUTED process may exit with a core dump when querying details of OSPF Type 5 LSA. |
|
PRJ-46901, PRHF-29091 |
Routing |
The traffic may be dropped, because the routes are sent but not installed to the routing table. The issue is related to IS-IS when running on P2P interfaces. |
|
PRJ-51184, PMTR-97662 |
Routing |
Adding an IPv6 OSPFv3 interface in Gaia Portal may fail when SecureXL UPPAK mode is enabled. |
|
PRJ-42940, PRHF-25665 |
VPN |
Policy installation may take a long time and fail with "Operation failed, install/uninstall has been improperly terminated.&CURRENTVERCMP *##MSG_IDENTIFY##". |
|
PRJ-42959, PRHF-26612 |
VPN |
When SCV is enabled, Capsule Connect/ Capsule VPN clients may fail to access internal resources. |
|
PRJ-45128, PMTR-89945 |
VPN |
Back connection does not function on the Statically NATed Office Mode address as expected. |
|
PRJ-51016, PRHF-31253 |
VPN |
In a rare scenario, all the IKED processes exit approximately once an hour without core or log indicating that it was triggered by the FWD/CPWD process exit. Refer to sk181643. |
|
PRJ-46261, PRHF-28718 |
VPN |
The "Encryption Domain Per community" feature overrides the Encryption Domain for other communities. Refer to sk170857. |
|
PRJ-46295, PRHF-28702 |
VPN |
Users that were moved from one AD group to another group still are shown in both access role groups when running the " |
|
PRJ-47493, PRHF-28831 |
VPN |
Potential VPN outage during policy installation. |
|
PRJ-43907, PMTR-86796 |
VPN |
When working with ClusterXL in Load Sharing mode, a VPN tunnel may fail to be established. |
|
PRJ-47878, PRHF-29650 |
Multi-Portal |
The Security Gateway may send a wrong certificate to the MAB Portal during certificate authentication. |
|
PRJ-46919, PMTR-92516 |
Multi-Portal |
The MPDAEMON process may be persistently down, even post reboot. |
|
PRJ-50313, PMTR-96307 |
Multi-Portal |
A low-severity security vulnerability may exist when establishing an HTTPS connection to the Security Gateway. |
|
PRJ-43879, PMTR-87205 |
VSX |
When running "vsx_fetch" from a context that is not VS0, this output is displayed: "Management rejected fetch for this module - sic name does not match. Couldn't fetch VSX configuration by IPs, trying to fetch by names." |
|
PRJ-50953, PRHF-30747 |
VSX |
In some scenarios, the VSX Security Gateway may not set the MAC header correctly when sending traffic directly out of an interface on a Virtual Router. |
|
PRJ-51077, PMTR-97700 |
VSX |
When User Mode (UPPAK) is enabled, there may be performance loss when passing traffic through a Virtual Switch on a VSX Security Gateway. |
|
PRJ-51166, PMTR-97873 |
VSX |
In some scenarios, the VSX VSLS cluster cannot pass the traffic for up to twenty seconds after performing a failover and failback when User Mode (UPPAK) is enabled. |
|
PRJ-47838, PRHF-29698 |
VSX |
In a rare scenario, affinity configuration on VSX may fail. |
|
PRJ-47797, PRHF-29709 |
VSX |
A memory leak may occur in the CPD process. |
|
PRJ-44301, PMTR-90180 |
VSX |
When adding a route using |
|
PRJ-44269, PMTR-86105 |
VSX |
The " |
|
PRJ-47399, PRHF-29485 |
VSX |
When changing Virtual Systems (VS's) using the VS name, the "failed to find an ID for a VS named XXX" error is shown. |
|
PRJ-46972, PRHF-29232 |
Gaia OS |
Incorrect Multi-Queue configuration when MDPS, VSX, or both are enabled. Refer to sk181249. |
|
PRJ-46276, PRHF-28848 |
Gaia OS |
When changing bond settings, the bond may be missing the global IPv6 Address. |
|
PRJ-47774, PRHF-28671 |
Gaia OS |
Snapshot fails when the unpartitioned disk size is greater than 1TB. Refer to sk181485. |
|
PRJ-44371, PRHF-27627 |
Gaia OS |
SNMP OIDs for ISP Redundancy status are not refreshed when the ISP link changes the status. |
|
PRJ-46021, PRHF-28611 |
Gaia OS |
The SNMPD process memory consumption may be high, which causes the process to become unresponsive. |
|
PRJ-46284, EPS-51347 |
Harmony Endpoint |
Non-domain macOS devices are created as a new endpoint on the Endpoint Management when re-installing the device. |
|
PRJ-46852, PRHF-22912 |
Harmony Endpoint |
Because of a rare race condition, AD scanners may get stuck in the initializing state with "ERROR ajp-nio2-127.0.0.1-8009-exec-96 - Failed to enumerate scanner instances for SF-DC2.mapro.cat, scanner instance788b7398-5a79-91fb-6f68-137813a5556e (UsmDSConfigResponder)java.lang.NumberFormatException". |
|
PRJ-48876, EPS-52991 |
Harmony Endpoint |
|
|
PRJ-43572, PRHF-27125 |
Harmony Endpoint |
After the Deploy New Endpoint push operation is successfully done, the list of target devices may change to "None". And it is not possible to delete this push operation manually, a "Sorry, we had an API issue during request" message is printed. |
|
PRJ-46803, PRHF-28984 |
Harmony Endpoint |
In rare scenarios, when making changes in SmartConsole, it gets disconnected. |
|
PRJ-47056, EPS-51960 |
Harmony Endpoint |
Some devices added to a Virtual Group from the SmartEndpoint Reporting tab do not receive the assigned policy. |
|
PRJ-43045, PRHF-26539 |
Harmony Endpoint |
E2 engine may send an incorrect value of datDate in sync request. |
|
PRJ-48257, PRHF-25142 |
Harmony Endpoint |
The default policy configured in the Check Point Portal may not be exported with the new Endpoint Security client package. |
|
PRJ-51660, EPS-54792 |
Harmony Endpoint |
|
|
PRJ-47900, PRHF-29630 |
CloudGuard Network |
Azure mapping may fail on Private Endpoint without network interfaces. In the cloud proxy logs, the "ERROR datacenter.scanner.DcScanner [scanner-Azure-XXX]: Error during scan - attempting to reconnect for scanner of [Azure] in domainYYY" messages are printed. |
|
PRJ-47735, PRHF-29654 |
CloudGuard Network |
After an upgrade, Azure Gov mapping may fail. |
|
PRJ-43610, PRHF-27033 |
VoIP |
SIP agent implements a keep-alive mechanism against the RFC, making each message arrive with a different tag in the "From" header, which may increase the memory of the Security Gateway, and these messages may be dropped once they hit the limit defined (the " |
|
PRJ-43719, PRHF-26939 |
VoIP |
After an upgrade, VoIP, and SIP / H323 traffic may be dropped in the VPN tunnel. Refer to sk179651. |
|
PRJ-48851, PMTR-94227 |
Scalable Platforms |
In a Maestro Orchestrator environment, the " |
|
PRJ-50121 |
Scalable Platforms |
After enabling the Maestro Fastforward feature, policy installation on a Maestro Security Group may fail in SmartConsole with "Maestro acceleration (MXL) failed, reason: General error. Please check /var/log/acl_cli.log on the security group SMO for more details". Refer to sk181661. |
|
PRJ-49177, PRJ-45520 |
Scalable Platforms |
Reboot may take a long time. |
|
PRJ-50344, MBS-17829 |
Scalable Platforms |
When the LightSpeed interface is brought down or up, the hardware nroute flow is added to the list even if it fails to offload. This may trigger a Security Gateway crash. |
|
PRJ-50031, PRJ-46817 |
Scalable Platforms |
|
|
PRJ-46575, PMTR-92205 |
Scalable Platforms |
In a Maestro environment, LACP bond subordinates may become suspended when using the shared interfaces feature, particularly when the quantity of bonds and subordinates is significantly high. |
|
PRJ-46246, PMTR-91940 |
Scalable Platforms |
In rare scenarios, when using " |
|
PRJ-50346, MBS-17803 |
Scalable Platforms |
In a rare scenario, the Security Gateway may access obsolete nroute memory, resulting in a crash. |
|
PRJ-44501, PRHF-27538 |
Scalable Platforms |
Policy installation may cause traffic interruption on Maestro Security Group due to missing VLANs of a Virtual System in the configuration file. |
|
PRJ-48213, PMTR-93744 |
Scalable Platforms |
In rare scenarios, the CONFD process may get stuck. This may cause Maestro Orchestrator boot to hang and login to Gaia Portal to fail. |
|
PRJ-47641, PRHF-29629 |
Scalable Platforms |
In a Scalable Platform environment, when opening an IPS Packet Capture originated on a local member, the "Fetching in progress" error is displayed, and a "Capture file was not found on remote SGM" entry is printed in the log. |
|
PRJ-47864, ACCHA-3317 |
Scalable Platforms |
Accessing the SMO Gaia Portal and performing configuration changes may fail with the "Error in acquiring buffer of member info (-1)" error." |
Take 41
Released on 20 November 2023 and declared as Recommended on 04 December 2023
|
ID |
Product |
Description |
|---|---|---|
|
Take 41 - Improvements and Resolved Issues |
||
|
PRJ-50104, PRHF-30325 |
Diagnostics |
UPDATE: Added SecureXL SYN Defender metrics to Skyline. Refer to the Skyline Metrics Repository. |
|
PRJ-49892, PMTR-95687 |
Security Management |
UPDATE: Removed a redundant |
|
PRJ-49825, PMTR-95347 |
Security Management |
UPDATE: Upgraded the |
|
PRJ-49787, PMTR-95614 |
Security Management |
UPDATE: |
|
PRJ-50265, PRJ-49966, PRJ-48318, PRJ-49012, ODU-1121, ODU-1137 ODU-1256, ODU-1304 |
Web SmartConsole |
UPDATE: New features and improvements are released in Take 81, Take 85 and Take 90 via self-updatable package. Refer to sk170314. |
|
PRJ-49109, PMTR-94517 |
SmartConsole |
UPDATE: Applied security related improvements to the |
|
PRJ-50125, PRJ-50124, ODU-1217, ODU-1328 |
CPView |
UPDATE: Added Take 68 and Take 70 of CPotelcol (OpenTelemetry Collector) Release Updates. Refer to sk180522. |
|
PRJ-50043, ODU-1264 |
CPView |
UPDATE: Added Take 14 of CPquid (QUID) Release Updates. Refer to sk181458. |
|
PRJ-50093, PRHF-30702 |
Security Gateway |
UPDATE: Improved traffic classification of GTP traffic on the Security Gateway to enhance the stability. |
|
PRJ-49494, ODU-1170 |
Threat Prevention |
UPDATE: Added Update 21 of Autonomous Threat Prevention Management integration Release. Refer to sk167109. |
|
PRJ-49746, PMTR-95099 |
Mobile Access |
UPDATE: SNX used to connect back to Mobile Access Software Blade's portal FQDN by resolving its IP address locally. This method makes it sensitive to DNS poisoning attacks such as those specified by TunnelCrack. Therefore, it was modified to connect back to the Security Gateway / Cluster member IP address by default. |
|
PRJ-50418, PRHF-30748 |
CloudGuard Network |
UPDATE: The automatic scanning of NSX-T IP ranges feature is now disabled by default. Refer to sk181614. See Critical Information for R81.20 Jumbo Hotfix Accumulator. |
|
PRJ-48340, ODU-1081 |
CloudGuard Network |
UPDATE: Added Take 20 of Public Cloud CA Bundle. Refer to sk172188. |
|
PRJ-49936 |
Harmony Endpoint |
UPDATE: Upgraded symmetricDS to the 3.14.9 version. |
|
PRJ-45981, ODU-1154 |
Scalable Platforms |
UPDATE: Added Take 29 of Check Point Support Data Collector (CPSDC) for Scalable Platforms and Maestro Security Appliances. Refer to sk164414. |
|
PRJ-50543, ODU-1113 |
HCP |
UPDATE: Added Update 14 of HealthCheck Point (HCP) Release. Refer to sk171436. |
|
PRJ-50030, PMTR-95988 |
Security Management |
The Gaia Clish command "show configuration user" fails with "Segmentation fault" on a Management Server. Refer to sk181626. |
|
PRJ-50899, PRHF-31187 |
Security Gateway |
A double-free flaw that leads to a possible Security Gateway crash was identified. This release includes the fix to enhance system stability and security. |
|
PRJ-50191, PMTR-96205 |
IPS |
Policy installation may fail on Security Gateways with enabled IPS and configured Strict profile and IPv6. |
|
PRJ-49379, PRHF-30056 |
SecureXL |
SYN Defender may not correctly handle reused connections. |
|
PRJ-49467, PRHF-30344 |
Scalable Platforms |
On a Security Group with MDPS enabled:
After installing this Take, when MDPS plane separation is enabled, in the context of the Management plane, the directory /sys/class/net/ now shows interfaces that belong to the Data plane, although it should show interfaces that belong to the Management plane. See sk182076. |
Take 38
Released on 23 October 2023
|
ID |
Product |
Description |
|---|---|---|
|
Take 38 - New Functionality |
||
|
PRJ-46771, PMTR-94543, PRJ-49262, MB-1208 |
Security Gateway |
NEW: This Jumbo Hotfix Take introduces support for new Check Point Firewall appliances 19200, 29100, and 29200. Refer to sk180520.
|
|
PRJ-47822, PMTR-93184 |
Security Gateway |
NEW: Identity Awareness daemons (PDPD and PEPD) now use a modern memory allocator. The feature is disabled by default. Refer to sk181629. |
|
PRJ-42434, PMTR-94471 |
SecureXL |
NEW: Added support for User Space Mode (UPPAK) on LightSpeed Appliances (QLS250, QLS450, QLS650, and QLS800 - see sk179432). After upgrading to this Jumbo Hotfix Take, these appliances will run in UPPAK mode by default. |
|
Take 38 - Improvements and Resolved Issues |
||
|
PRJ-48144 |
Identity Awareness |
UPDATE: Added a new mode for Identity Awareness Software Blade - "PDP-Only", where the Security Gateway acts only as Policy Decision Point (PDP) for identity acquisition and distribution and does not enforce the identity-based policy. The new mode improves scalability for PDPs and Identity Broker. Refer to sk181605. |
|
PRJ-49556 |
SecureXL |
UPDATE: On Check Point LightSpeed appliances running in Kernel Mode (KPPAK), when using a feature that is not supported in User Space Mode (UPPAK), a notification that after upgrading to this Jumbo Take the appliance will still run in KPPAK is now displayed. |
|
PRJ-49380, ACCHA-3579 |
SecureXL |
UPDATE: The VXLAN creation feature is now blocked in User Space Mode (UPPAK). |
|
PRJ-49383, ACCHA-3580 |
SecureXL |
UPDATE: The GRE interface creation feature is now blocked in User Space Mode (UPPAK). |
|
PRJ-49385, ACCHA-3581 |
SecureXL |
UPDATE: The VRRP interface creation feature is now blocked in User Space Mode (UPPAK). |
|
PRJ-49211 |
SecureXL |
UPDATE: When UPPAK mode is enabled, the limit in /var/log/dump/usermode/ gets automatically extended from 10 Gb to 30 Gb to prevent possible deletion of large core files. |
|
PRJ-43883, PMTR-86708 |
VSX |
UPDATE: The " |
|
PRJ-48405, ODU-1113 |
HCP |
UPDATE: Added Update 13 of HealthCheck Point (HCP) Release. Refer to sk171436. |
|
PRJ-48879, PRHF-29542 |
Security Management |
|
|
PRJ-49205, PRHF-30319 |
Security Management |
Refer to sk181471. See Critical Information for R81.20 Jumbo Hotfix Accumulator. |
|
PRJ-48791, PMTR-94145 |
Security Gateway |
An upgrade may fail with the validation message "Install On column contains Security Gateways without Blades that exist in the 'Protection/Site/File/Blade column'_ Blades". |
|
PRJ-45207 |
Security Gateway |
In rare scenarios, the FWK process may unexpectedly exit when running an outgoing (a local connection) from the Security Gateway. |
|
PRJ-49513, PMTR-94919 |
Threat Prevention |
In a rare scenario, changes in Threat Prevention custom intelligence feeds settings may not be applied after policy installation. |
|
PRJ-48253, PMTR-93781 |
Identity Awareness |
Identity-based roles may not match the Access Roles after User and Machine were identified. |
|
PRJ-45057, PMTR-89198 |
Identity Awareness |
In a rare scenario, during authentication, the PDPD process can become unresponsive. |
|
PRJ-46844, PRJ-47436 |
Identity Awareness |
In a rare scenario, the PDPD process may unexpectedly exit during an LDAP query. |
|
PRJ-48148, IDA-5480 |
Identity Awareness |
When Identity Agent authenticates both the machine and the user, a rare race condition may occur and disrupt the intended sequence of authentication and publishing, resulting in incorrect data handling. |
|
PRJ-47111, PMTR-92652 |
Identity Awareness |
Identity Broker may be missing some identities. |
|
PRJ-47110, PMTR-84390 |
Identity Awareness |
The PDPD process may exit during Identity Broker synchronization. |
|
PRJ-48934, IDA-5512 |
Identity Awareness |
The PDP Gateway may be unresponsive while publishing identities to Identity Broker subscriber in the Sync flow. |
|
PRJ-47890, PMTR-93412 |
Identity Awareness |
In rare scenarios, the PDP Gateway may not be responsive when Identity Agent reconnects. |
|
PRJ-48933, IDA-5491 |
Identity Awareness |
In a rare condition, in a large environment, the PDP Gateway may crash when publishing an IP-change message to its Identity Broker subscribers. |
|
PRJ-49339, PMTR-95068 |
ClusterXL |
In ClusterXL Bridge mode, failover fail-back may cause a short outage. |
|
PRJ-47844, PMTR-93206 |
ClusterXL |
When setting the bonding group to 8023AD mode, the " |
|
PRJ-49947, ACCHA-3621 |
ClusterXL |
Standby VSX cluster members working in Virtual System Load Sharing (VSLS) mode may not be able to access the Internet. |
|
PRJ-48933 |
CoreXL |
Corrupted VS affinity configuration may cause excessive error messages " |
|
PRJ-49239, ACCHA-3549 |
Routing |
If the Security Gateway is in UPPAK mode and a PBR rule directs traffic to a Server on a different subnet, deleting the ARP entry for the Gateway on the Server can disrupt the traffic flow. |
|
PRJ-49906, PMTR-95831 |
Routing |
When BGP local address is configured, BGP peer may fail to establish. See Critical Information for R81.20 Jumbo Hotfix Accumulator. |
|
PRJ-49485, PRJ-49485 |
VPN |
VPN connectivity may be unstable when IPv6 and VPN star communities are configured. |
|
PRJ-49351, PRHF-30364 |
VSX |
In some scenarios, in a Maestro Security Group configured in the VSX mode, a Virtual System that connects to a Virtual Switch may drop traffic as "Out of State" or wrongly drop it on the clean up rule. Refer to sk181823. |
|
PRJ-49933 |
CloudGuard Network |
After an upgrade, CloudGuard Central Licenses may be removed from the CloudGuard Central License pool on the Security Management and from the Security Gateways. Refer to sk181500. See Critical Information for R81.20 Jumbo Hotfix Accumulator. |
|
PRJ-49308, PRJ-48987 |
Scalable Platforms |
The Security Gateway may lose connectivity to Maestro Hyperscale Orchestrator (MHO) when running the " |
|
PRJ-49314, PRJ-49111 |
Scalable Platforms |
After adding a new Security Group Member to a Security Group with the default shell |
Take 26
Released on 14 August 2023 and declared as Recommended on 13 September 2023
|
ID |
Product |
Description |
|---|---|---|
|
Take 26 - New Functionality |
||
|
PRJ-44227, PMTR-89589 |
Compliance |
NEW: Compliance Software Blade is enhanced with 5 new Firewall Best Practices:
|
|
PRJ-44577, PMTR-90463 |
Internal CA |
NEW: Previously, the Internal CA certificate required manual renewal process. Now it will be automatically renewed one year before its expiration date. |
|
PRJ-44672, PMTR-90420 |
Security Management |
NEW:
|
|
PRJ-44359, PMTR-90221 |
Security Management |
NEW: Added a new Management API command "
|
|
PRJ-44747, PMTR-89334 |
Security Management |
NEW: Added support for multiple languages in the Change Report. |
|
PRJ-44421, ACCESS-458 |
Security Management |
NEW: Added a new field to the output of " This field displays the object's unique name as it is saved in the updatable objects repository. |
|
PRJ-43522, PMTR-89420 |
Security Management |
NEW: It is now possible to add tags to Access rules and sections. A new field " For example:
|
|
PRJ-45679, PRJ-45678 |
CloudGuard Network |
NEW: CloudGuard Controller for NSX-T
Note: Importing Virtual Machines can be enabled only using Policy Mode APIs. When enabled, the amount of API requests toward the NSX-T manager increased. |
|
Take 26 - Improvements and Resolved Issues |
||
|
PRJ-45491, PRHF-28303 |
Security Management |
UPDATE: Significant performance improvement for policy installation when using many layers (up to four times faster). |
|
PRJ-46243, PMTR-86894 |
Security Management |
UPDATE: A Security Management Server/Domain Management Server can now manage up to 500 Security Gateways/Cluster members, allowing concurrent policy installation on all Security Gateways/Cluster members at once. |
|
PRJ-45204, ODU-843 |
Web SmartConsole |
UPDATE: New features and improvements are released in Take 76 via self-updatable package. Refer to sk170314. |
|
PRJ-45473, ODU-827 |
CPView |
UPDATE: First release of CPviewExporter Release Updates. Refer to sk180521. |
|
PRJ-45466, ODU-835 |
CPView |
UPDATE: First release of CPotelcol (OpenTelemetry Collector) Release Updates. Refer to sk180522. |
|
PRJ-44609, PMTR-90504 |
Threat Emulation |
UPDATE: FakeServer will now listen for packets coming from the Virtual Machine during Threat Emulation to port 18443 instead of port 8443. |
|
PRJ-44321, PMTR-90945 |
Threat Prevention |
UPDATE: The DCE-RPC kernel tables will now be global instead of local. This adjustment helps avoid issues with syncing between firewall instances and keeps data connections stable. |
|
PRJ-45463, PRJ-46432, ODU-890, ODU-898 |
Threat Prevention |
UPDATE: Added Update 18 and Update 19 of Autonomous Threat Prevention Management integration Release. Refer to sk167109. |
|
PRJ-46429, TPP-3290 |
Threat Prevention |
UPDATE: IPS bypass triggers will now be activated based on the average CPU load exceeding the high threshold, as opposed to the previous implementation, where a single CPU load triggered the bypass. The change will result in more effective security measures without unnecessary bypasses. |
|
PRJ-43784, PMTR-89672 |
Threat Prevention |
UPDATE: Ability to send packet capture on IPS / Anti-Bot silent protections to the research team to enhance the security. |
|
PRJ-45912, IDA-4843 |
Identity Awareness |
UPDATE: Implemented monitoring functionality and alerts for tracking the expiration date of Identity Broker certificates. |
|
PRJ-46224, PMTR-92426 |
ClusterXL |
UPDATE: Added support for IPv6 traffic synchronization in Multi-Version Clusters (MVC). See Critical Information for R81.20 Jumbo Hotfix Accumulator. |
|
PRJ-44719, PRHF-22566 |
SecureXL |
UPDATE: Added a new kernel parameter allowing to control the size of fragments table in SecureXL. To use it, set the kernel parameter " |
|
PRJ-42862, PMTR-88750 |
Zero Phishing |
UPDATE:
|
|
PRJ-44762, PRHF-27893 |
Gaia OS |
UPDATE: Increased the size of the scheduled snapshot database binding, allowing longer paths and passwords to be defined. |
|
PRJ-47227, PMTR-92606 |
Gaia OS |
UPDATE: Upgraded OpenSSL from 1.1.1t to 1.1.1u to include the latest security improvements. Refer to sk181427. |
|
PRJ-44354, PRJ-44355 |
CloudGuard Network |
UPDATE: Added support for Data Centers in AWS ap-southeast-4 Melbourne region. |
|
PRJ-43926, PRHF-27357 |
CloudGuard Network |
UPDATE: Added support for sending Data Center updates from the CloudGuard Controller to the main IP address of Active member on the Management Plane instead of the cluster VIP address on the Data Plane. Refer to the "updateClusterMemberAndNotVip" section in CloudGuard Controller R81.20 Administration Guide > Configuration Parameters. This change prevents scenarios when CloudGuard Controller fails to connect to Cluster with MDPS enabled (sk180981). |
|
PRJ-46550 |
CloudGuard Network |
UPDATE: Added new Security Management API commands for the CloudGuard Central License Utility:
|
|
PRJ-45214, MBS-14161 |
Scalable Platforms |
UPDATE: Added Management Data Plane Separation (MDPS) support for Maestro Orchestrator and Chassis scalable platforms. |
|
PRJ-43863, PMTR-89393 |
Scalable Platforms |
UPDATE: Added a new log file - /var/log/pull_config_report.log. It includes the summary of the "pull_config" action when it is performed on a member to indicate the reason for the Critical Device (Pnote) " |
|
PRJ-45908, ODU-946 |
Scalable Platforms |
UPDATE: Added Take 23 of Check Point Support Data Collector (CPSDC) for Scalable Platforms and Maestro Security Appliances. Refer to sk164414. |
|
PRJ-44959, PMTR-85311 |
Scalable Platforms |
UPDATE: Added a new log file to indicate the reason of member reboots if they are triggered by configuration mismatch - /var/log/configuration_reboot_info.log. |
|
PRJ-45389, ODU-914 |
HCP |
UPDATE: Added Update 12 of HealthCheck Point (HCP) Release. Refer to sk171436. |
|
PRJ-44461, PRHF-27327 |
Security Management |
In some scenarios, the Management API command " |
|
PRJ-45874, PRHF-28640 |
Security Management |
In some scenarios, Access Policy Verification fails but the name of the failed rule is not specified. |
|
PRJ-43569, PRHF-27059 |
Security Management |
After Full synchronization, SmartConsole login from a Domain Management Server to the Security Management Server that is configured as High Availability may fail. |
|
PRJ-45156, PRHF-28175 |
Security Management |
APP_ID may not be initialized when adding a new Check Point application via API, this may cause blocked access to several websites. |
|
PRJ-42040, PRHF-25898 |
Security Management |
Editing an object in SmartConsole may fail with "Server error is: Object not found (Code: x08003001D, Could not access file for write operation)". |
|
PRJ-44086, PRHF-27440 |
Security Management |
Login with SmartConsole to a Security Management Server may fail if using a DNS name instead of an IP address. Refer to sk180514. |
|
PRJ-46630, PMTR-92240 |
Security Management |
In the Infinity Services view, the Log Sharing status may not be correct. |
|
PRJ-44625, PMTR-82987 |
Security Management |
In the Accelerated Policy Installation flow, there is no validation for the scenarios when there are DAIP Security Gateways in the Destination column of the Access policy. |
|
PRJ-44984, PRHF-28012 |
Security Management |
When using SmartTasks to send a mail before or after publishing the operation, the value inserted into the Changes and Description fields does not take effect as expected. |
|
PRJ-44594, PMTR-89770 |
Security Management |
In some scenarios, running the Management API command " |
|
PRJ-43813, PRHF-27187 |
Security Management |
Login to SmartConsole with a RADIUS administrator from the SmartEvent Server may fail if this Server was upgraded. Refer to sk180584. |
|
PRJ-46399, PRJ-46725, PRHF-28962 |
Security Management |
In rare scenarios, policy installation fails with "Operation failed, install/uninstall has been improperly terminated". Refer to sk180448. |
|
PRJ-46183, PRHF-28820 |
Security Management |
The Management API command " |
|
PRJ-43917, PMTR-83586 |
Security Management |
In the Object Explorer window in SmartConsole, the IP address column is sorted alphabetically, although it should be sorted in numerical order. |
|
PRJ-44592, PMTR-89373 |
Security Management |
The Management API command " |
|
PRJ-44596, PMTR-89845 |
Security Management |
When adding/setting an access rule, setting certain fields to "Any" or "None" may fail because of case sensitivity. |
|
PRJ-44897, PRHF-27875 |
Security Management |
Policy installation gets stuck if the known proxy group contains the policy target. |
|
PRJ-45655, PRHF-28407 |
Security Management |
Packet mode search in SmartConsole may show rules that do not match the query if the query contains source, destination, and service. |
|
PRJ-44996, PRHF-27895 |
Security Management |
In rare scenarios, login to SmartConsole fails, and opening Security Gateway objects times out. |
|
PRJ-44473, PRHF-27659 |
Security Management |
Excluding a network with Anti-Spoofing by name on the Security Gateway using the Management API command " |
|
PRJ-43267, PRHF-26404 |
Security Management |
When creating several LSM objects (Security Gateways or clusters) via both Management API and SmartConsole, the LSM objects IP addresses may be duplicated. |
|
PRJ-45878, PRHF-28654 |
Security Management |
If an empty Network Group is linked in the source or destination fields of an Access Rule, policy verification may not generate an error. Instead, it may treat the empty group as if there is an "Any" object. |
|
PRJ-42423, PRHF-26275 |
Security Management |
In some scenarios, an upgrade may fail when a Network object Group contains more than 32000 members. |
|
PRJ-43187, PRHF-26778 |
Security Management |
If a Security Gateway is added to a group after configuring an installation policy preset, the policy may not be installed on that Security Gateway. Refer to sk181461. |
|
PRJ-42553, PRHF-26118 |
Security Management |
After restoring a Multi-Domain Security Management Server, High Availability synchronization may fail with "The Security Management Servers contain different Hotfixes". |
|
PRJ-43192, PRHF-25274 |
Security Management |
If the Security Management Server is behind NAT, remote Management API login fails. |
|
PRJ-45159, PRHF-28175 |
Security Management |
APP_ID may not be initialized when adding a new Check Point application via API, this may cause blocked access to several websites. |
|
PRJ-43963, PRHF-27308 |
Security Management |
In rare scenarios, the Security Gateway accepts all IP addresses as approved "gui_clients", although it was provided with a list of specific trusted IP addresses. |
|
PRJ-46088, PRHF-28685 |
Multi-Domain Security Management |
A scheduled Install Policy Preset may not have its next run time updated when:
|
|
PRJ-44970, PRHF-28002 |
Multi-Domain Security Management |
In rare scenarios, in Multi-Domain Security Management environments with over 500K network objects, login to SmartConsole fails with "Connection timed out" or "Unable to connect to server" messages. |
|
PRJ-45069, PRJ-46163, PRHF-28192, PRHF-28143, PRJ-47051, PRHF-29196 |
Multi-Domain Security Management |
In rare scenarios, in a Multi-Domain Security Management environment:
|
|
PRJ-43785, PRHF-24558 |
Multi-Domain Security Management |
Deleting a Domain from SmartConsole fails after a Domain Server was removed and the Domain has no Domain Servers. |
|
PRJ-43599, PRHF-27209 |
SmartConsole |
Typo in the Compliance report - "OSFP" instead of "OSPF". |
|
PRJ-46531, PRHF-85028 |
SmartConsole |
SmartConsole may crash while checking for updates.
|
|
PRJ-46510, PRHF-28930 |
SmartConsole |
Data Center objects may not appear as unused objects in the Object Explorer view, although they should. |
|
PRJ-45593, PRHF-28286 |
SmartConsole |
In some scenarios, in SmartConsole, when clicking the picker to add Security Gateway to a Threat Prevention policy "Install On" column, no Security Gateway objects appear. Refer to sk180964. |
|
PRJ-46171, PRJ-43171 |
CPUSE |
When working in a Scalable Platforms environment, a member may get in a bootloop. The issue occurs after consequent upgrade of this member to R81.10, Deployment Agent (DA) update and enabling image auto cloning. |
|
PRJ-43473 |
CPUSE |
In some scenarios, the task progress bar is missing during Jumbo installation from SmartConsole. |
|
PRJ-43477, PRHF-26987 |
Logging |
The Non-Transparent Proxy configuration is missing the IP address of the destination website in the URL Filtering logs. Refer to sk180403. |
|
PRJ-45670, SL-6728 |
Logging |
In specific network configurations, after installing a policy, the target IP address of the Log Server may differ from what was configured. |
|
PRJ-41667, PRHF-25662 |
Logging |
In some scenarios, in the Logs & Monitor view, no results are shown when filtering updatable object names by the "dst_uo_name" field. |
|
PRJ-41595, PRHF-25533 |
Logging |
SmartEvent may generate false Anti-Bot / Anti-Virus related logs which do not contain any information. |
|
PRJ-45418, PRHF-28191 |
Logging |
Source and destination IP addresses in SmartLog may not be shown correctly for duplicate packets of fragmented traffic. |
|
PRJ-46074, PRHF-28787 |
Logging |
After an upgrade of the Security Management Server, the " |
|
PRJ-44408, PMTR-90258 |
Security Gateway |
Global tables (ghtab) may not be synchronized between members, this can lead to instability of traffic. |
|
PRJ-46054, PRHF-28455 |
Security Gateway |
The Security Gateway may crash while inspecting non-HTTP traffic. |
|
PRJ-44190, PRHF-25647 |
Security Gateway |
The Security Gateway may crash due to a memory issue. |
|
PRJ-45804, PRHF-28559 |
Security Gateway |
Resolved an issue where CPD would consume a large amount of CPU in VSX with a large number of interfaces configured (greater than 1024). Refer to sk181588. |
|
PRJ-47118, PRHF-29292 |
Security Gateway |
In some scenarios, after an upgrade, the FWD process may unexpectedly exit. |
|
PRJ-45001, PRHF-27844 |
Security Gateway |
In a Maestro environment where members are VSXs, connection over SSH or RDP from a host behind Maestro to a peer may be dropped. |
|
PRJ-45091, PMTR-90992 |
Security Gateway |
It is impossible to configure the total number of IPv4 CoreXL Firewall instances and IPv6 CoreXL Firewall instances to more than 64 when the Security Gateway with more than 64 CPU cores runs in the USFW mode. Refer to sk181408. |
|
PRJ-43849, PMTR-86732 |
Security Gateway |
Stack buffer overflow may occur in the FWGTP process. |
|
PRJ-46677, PRJ-46683, PRHF-29045, PRHF-28963, PRJ-46680, PRHF-28973 |
Security Gateway |
After an upgrade, GTP traffic and memory issues may occur. |
|
PRJ-46335, PRHF-28842 |
Security Gateway |
The Security Gateway may crash after a failure in policy installation. |
|
PRJ-46139, PRHF-28806 |
Security Gateway |
The " |
|
PRJ-44312, PRHF-27439 |
Security Gateway |
In rare scenarios, modifying the " |
|
PRJ-46688, PMTR-91240 |
Security Gateway |
When adding a new connection, the "Smart Connection Reuse" feature may cause errors in $FWDIR/log/fwk.elg and connection drops. |
|
PRJ-42788, PRHF-22608 |
Security Gateway |
In some scenarios, the Security Gateway may crash. |
|
PRJ-44605, PRHF-12636 |
Security Gateway |
The FWK process may unexpectedly exit while processing the mail flow and generate a core dump. |
|
PRJ-45497, PRHF-28324 |
Security Gateway |
On the Security Gateway with Management Data Plane Separation (MDPS) enabled:
|
|
PRJ-42531, PRHF-25233 |
Security Gateway |
In some scenarios, while processing H323 traffic, the Security Gateway may unexpectedly restart. |
|
PRJ-45479, PRHF-28350 |
Security Gateway |
Security Gateway may crash when running kernel debugs of the "UP" module. |
|
PRJ-44252, PRHF-27426 |
Security Gateway |
When setting " |
|
PRJ-45450, PRHF-28277 |
Security Gateway |
When the Security Gateway handles specific HTTP requests, memory failure may occur. CPView registers SMEM failure. |
|
PRJ-44753, PRHF-27707 |
Security Gateway |
Policy installation may fail with "Error 2000240" because of an IPv6 flow issue. |
|
PRJ-41879, PMTR-87372 |
Security Gateway |
On supported Open Servers (sk167052), after changing the Firewall mode from Kernel Space (KSFW) to User Space (USFW) and reboot, the Security Gateway continues to boot in the Kernel Space mode. |
|
PRJ-45187, PMTR-90969 |
Security Gateway |
Traffic stops working after a Security Gateway Member recovers from a failure. Refer to sk180705. |
|
PRJ-44106, PRHF-26013 |
Threat Prevention |
Fetching custom intelligence feeds via CLI may fail because of SSL certificate issues. |
|
PRJ-44571, PRHF-27749 |
Threat Prevention |
After an upgrade, adding an IoC feed with IP range indicator type may fail with "Feed format problem. Bad or Empty Feed". |
|
PRJ-44152, PMTR-89916 |
Threat Prevention |
In a rare scenario, policy installation may fail because of IoC observables overrides. |
|
PRJ-44201, PMTR-89130 |
Threat Prevention |
When IPS Software Blade is enabled, the Security Gateway may crash. |
|
PRJ-45925, PRHF-28533 |
Identity Awareness |
In a rare scenario, the PDPD process may unexpectedly exit during user authentication flow. |
|
PRJ-43748, PRHF-27158 |
Identity Awareness |
The output of the " |
|
PRJ-45429, PRHF-28304 |
Application Control |
Some TLS1.3 applications without SNI do not match the rules. |
|
PRJ-43976, PRHF-27284 |
URL Filtering |
When applying the " |
|
PRJ-44181, PMTR-89863 |
IPS |
In some scenarios, the FWK process may unexpectedly exit, while Threat Prevention Software Blades inspect HTTP traffic. |
|
PRJ-45658, PRHF-28404 |
SSL Inspection |
In a VSX environment, the WSTLSD process run by Virtual Systems may ignore proxy configuration on VS0. |
|
PRJ-46280, PRHF-28749 |
Anti-Virus |
Importing a custom intelligence feed containing IP ranges may fail. |
|
PRJ-44671, PMTR-90550 |
Anti-Virus |
Anti-Virus Software Blade may bypass inspection of URLs with sub-domain portion. |
|
PRJ-46606, PRHF-28851 |
Anti-Virus |
The DLPU process may stop working, creating a User Space core dump file on the Security Gateway. Refer to sk181026. |
|
PRJ-44234, PRHF-15953 |
Anti-Virus |
The RAD process CPU utilization may be high when Anti-Virus engine processes many reverse DNS queries. |
|
PRJ-45195, PRHF-28182 |
Mobile Access |
In rare scenarios, IOS users are unable to send emails using Capsule Workspace business mail. |
|
PRJ-45100 |
Mobile Access |
SSL Network Extender (SNX) may randomly disconnect after a version upgrade. Refer to sk173765. |
|
PRJ-45852, PRHF-28379 |
Mobile Access |
Mobile Access Security Gateway does not recognize Office 365 URL This can cause OAuth 2.0 authorization to fail, it may not be possible to view the mail. |
|
PRJ-46403, PRHF-28925 |
Mobile Access |
Sending emails with attachments via Capsule Workspace may fail on iOS. |
|
PRJ-46506, PRHF-28936 |
ClusterXL |
Some IPv6 connections randomly stop passing through ClusterXL in High Availability mode. Refer to sk180969. |
|
PRJ-45163, PMTR-91017 |
ClusterXL |
A VRRP cluster member may be stuck in boot after a cluster upgrade. |
|
PRJ-42772, MBS-15783 |
ClusterXL |
Asymmetric UDP traffic may be dropped with "First Packet isn´t Syn". |
|
PRJ-43640, PMTR-89506 |
SecureXL |
In some scenarios, incorrect MSS value calculation may lead to traffic drops and performance instability. |
|
PRJ-44365, PRHF-27633 |
SecureXL |
When running |
|
PRJ-41959, MBS-16159 |
Routing |
In some scenarios, a Security Group Member failover can trigger routes to be lost on other members in the Security Group. |
|
PRJ-44710, PRHF-27240 |
Routing |
An IGMP group with an expiration time of 7101 weeks should be deleted when it reaches 0 seconds, but instead, it may remain at 7101 weeks until a membership report is sent, then it resets to the interval of that interface. |
|
PRJ-44706, PRHF-27225 |
Routing |
Multicast receivers send IGMP membership reports, but the outbound interfaces are missing from the routing table. |
|
PRJ-45380, PRHF-26701 |
Routing |
A VRRP/VRRP6 interface may go into Master/Master state. |
|
PRJ-46133, ROUT-2838 |
Routing |
When two interfaces with the same local address are configured, BGP may use an incorrect interface to reach a peer. |
|
PRJ-41962, MBS-16158 |
Routing |
Routing log messages generated when Standby cluster members reconnect to members in Master state are not clear. |
|
PRJ-43828, PRHF-27339 |
VPN |
In a Site to Site VPN, when one of the sites is a cluster in Load Sharing mode, it can cause incorrect destination member calculation for asymmetric connection and the traffic might be dropped. Refer to sk180855. |
|
PRJ-44313, PRHF-24641 |
VPN |
The "failed to terminate session" error is displayed when using |
|
PRJ-44992, PRJ-46303, PRHF-27569, PRJ-44830, PRHF-28061 |
VPN |
|
|
PRJ-45469, PRHF-28353 |
VPN |
StrongSWAN Remote Access authentication fails when the LDAP lookup type is not the default method. |
|
PRJ-44219, PRHF-27548 |
VPN |
The " |
|
PRJ-45920, PRHF-28589 |
VPN |
The FWM process may unexpectedly exit at startup because of an incorrect VPN key initiation. |
|
PRJ-46952, PRHF-92538 |
VSX |
An upgrade of VSX cluster members configured as VSLS from SmartConsole may fail. |
|
PRJ-45146, PRHF-28154 |
VSX |
Some packets may disappear when using the i40e driver, and VMAC is configured on the cluster. |
|
PRJ-45006, PRHF-28080 |
VSX |
A VSX Security Gateway may crash while attempting to collect statistics after running the " |
|
PRJ-44123, PMTR-88803 |
VSX |
Changing the main IP address of a Virtual Router may cause the FWM process to exit. |
|
PRJ-44746, PMTR-90616 |
VSX |
Virtual System's interfaces may be missing when running the Clish command " |
|
PRJ-44090, PRHF-27224 |
VSX |
Values provided by the VSX OID tree: 1.3.6.1.4.1.2620.1.16.22.5.1 may be incorrect. |
|
PRJ-45402, PRHF-28365 |
VSX |
Warp interfaces may appear in VS0 and disrupt connectivity when editing a Virtual Switch with a bond and VLANs. |
|
PRJ-45864, PMTR-91668 |
Gaia OS |
Gaia backup may fail, leaving a temporary partition behind. Any new attempt to create a new backup returns an error. |
|
PRJ-41910, PRHF-25737 |
Gaia OS |
Gaia Portal logs are printed with "info" severity. |
|
PRJ-45566, ACCHA-2110 |
Gaia OS |
The $FWDIR/log/fwd.elg file may get corrupted during log rotation. Refer to sk180728. |
|
PRJ-42780, PRHF-26416 |
Gaia OS |
Scheduled SCP snapshots to a Windows Server may fail with the "Failed to connect to remote server. Please validate connection". |
|
PRJ-43199, PMTR-88966 |
Gaia OS |
Appliance with a Dual Image installed cannot reboot after restoring to the factory default of a Dual Image. Refer to sk180331. |
|
PRJ-46945, PRHF-29014 |
Harmony Endpoint |
KAV updater on the Server may fail to receive updates when proxy is used. |
|
PRJ-45541, PRHF-27987 |
CloudGuard Network |
AWS Data Center mapping fails when an interface subnet is missing from the list of subnets. |
|
PRJ-44479, PMTR-90345 |
CloudGuard Network |
Azure scan fails if a Virtual Machine Scale Set (VMSS) is deleted after the scan started. |
|
PRJ-44615, PRHF-27502 |
VoIP |
In rare cases, SIP UDP traffic may cause Security Gateway to crash because of a memory allocation issue. |
|
PRJ-46476, PMTR-90803 |
VoIP |
SIP traffic may be dropped and "kiss_htab_bl_infra_slink: failed "earlynat_sport_ghtab_bl":3 reason: KISS_HTAB_BL_SLINK_LIMIT_REACHED" is printed in the $FWDIR/log/fwk.elg file. |
|
PRJ-43719, PRHF-26939 |
VoIP |
After an upgrade, VoIP, and SIP / H323 traffic may be dropped in the VPN tunnel. Refer to sk179651. |
|
PRJ-42783, PMTR-88669 |
Scalable Platforms |
Adding more than 250 VLANs on an Orchestrator MHO-175 Maestro Uplink interface causes intermittent traffic outages. Refer to sk180340. |
|
PRJ-45253, ACCHA-2021 |
Scalable Platforms |
Excessive "cphwd_get_device_accelerated_ifs: too many interfaces (32,XXX)" messages may be printed in the $FWDIR/log/fwk.elg file. Refer to sk180439. |
|
PRJ-44548, PRJ-44587 |
Scalable Platforms |
The " |
|
PRJ-45696, PRJ-45480 |
Scalable Platforms |
Querying the HW status via SNMP (OIDs .1.3.6.1.4.1.2620.1.6.7.*) or via the " |
|
PRJ-45302, PRHF-28238 |
Scalable Platforms |
In rare scenarios, the Single Management Object (SMO) may go to Down state after clicking a packet capture link in the IPS log in SmartConsole. |
|
PRJ-47985, PRJ-47745 |
Scalable Platforms |
Uninstalling Jumbo Hotfix Take 106/107 on Maestro Orchestrator (MHO) may cause an outage. |
|
PRJ-45363, PMTR-91252 |
Scalable Platforms |
Maestro Orchestrator |
|
PRJ-44437, PMTR-90202 |
Scalable Platforms |
WRP interfaces cannot be used for Source / Destination in a specific Fast Forward rule. |
|
PRJ-44022, PMTR-89909 |
Scalable Platforms |
Policy validation may fail if the Fast Forward feature is enabled. |
|
PRJ-44288, PMTR-88429 |
Scalable Platforms |
The " |
|
PRJ-45886, PMTR-90935 |
Scalable Platforms |
In VSLS mode, SNMP traffic may incorrectly be forwarded to SMO instead of DR manager of the corresponding Virtual System. |
|
PRJ-46646, PRHF-28694 |
Carrier Security |
Incorrect parsing of GTP-U traffic may cause anti-spoofing drops. |
|
PRJ-43225, CST-316 |
Carrier Security |
Security Gateway drops GTP Echo Response traffic with the reason "Wrong Destination Port". See sk181507. |
|
PRJ-43221, CST-312 |
Carrier Security |
Security Gateway drops GTP traffic with the reason "Static IP not allowed". See sk181506. |
|
PRJ-46674, PRHF-28770 |
Carrier Security |
Packet corruption, leading to traffic and performance issues. |
|
PRJ-43358, PRHF-24044 |
Carrier Security |
GTP traffic may be dropped and tunnels are not registered in gtp_tunnels. |
Take 24
Released on 12 July 2023 and declared as Recommended on 24 July 2023
|
ID |
Product |
Description |
|---|---|---|
|
Take 24 - Improvements and Resolved Issues |
||
|
PRJ-47513, PMTR-93037 |
GaiaOS |
UPDATE: Added notifications about the Expert mode login on Gaia Servers. Refer to sk181230:
These Gaia Clish commands are available to work with this feature:
|
|
PRJ-47103, PRHF-29329 |
Security Management |
Policy installation may fail with "Target is not defined in the database" error when the target name has many underscore or dash characters. See Critical Information for R81.20 Jumbo Hotfix Accumulator. |
|
PRJ-47265, PMTR-91800 |
SSL Inspection |
The $FWDIR/log/fwk.elg file may be flooded with the " |
|
PRJ-45350, PRHF-28275 |
ClusterXL |
After an upgrade, cluster members may frequently crash, causing instability in the environment. |
|
PRJ-45788, PRJ-42015 |
CloudGuard Network |
Deleting one hundred IP addresses or more from the Security Gateway at once may fail, resulting in recurrent deletion retries. |
|
PRJ-47144, PMTR-92807 |
Scalable Platforms |
A new member added to Maestro Security Group may get stuck in Down state because of the missing IPS files when using image auto cloning. |
Take 14
Released on 01 June 2023
|
ID |
Product |
Description |
|---|---|---|
|
Take 14 - New Functionality |
||
|
PRJ-44444 |
SD-WAN |
NEW: Added support for Check Point SD-WAN that provides resilient connectivity, optimizes usage of WAN connections for Internet and Site to Site VPNs allowing dynamic application traffic steering based on measured ISP link quality. Refer to sk180605. See Critical Information for R81.20 Jumbo Hotfix Accumulator. |
|
Take 14 - Improvements and Resolved Issues |
||
|
PRJ-45296, PMTR-86221 |
Security Management |
UPDATE: Added ability to block policy installation if this policy contradicts another policy installed on the Security Gateway. In this scenario, the Management API command " |
|
PRJ-44503, PMTR-88484 |
Security Management |
UPDATE: Significantly improved performance during upgrade and import for large Multi-Domain Security Management environments with many administrators (over 20 domains and over 100 global administrators).
|
|
PRJ-45675, PRHF-28332 |
Security Gateway |
UPDATE: Added a new environment variable " |
|
PRJ-45072, PMTR-89908 |
ClusterXL |
UPDATE: Improved the fullsync time after reboot in large scale environments. Refer to sk180742. |
|
PRJ-44871, PMTR-85849 |
VSX |
UPDATE: The default maximum number of processes monitored by CPWD is changed from 3000 to 10000. |
|
PRJ-45265, PMTR-91124 |
GaiaOS |
UPDATE: Added a defense mechanism against the hostname command injection in the Gaia Portal (CVE-2023-28130). Refer to sk181311. |
|
PRJ-45756, PMTR-91592 |
Scalable Platforms |
UPDATE: Improved the decision making flow for scenarios when Maestro Gateway should leave a Security Group. |
|
PRJ-45055, PRHF-27948 |
Security Management |
In rare scenarios, in multi-site environments, an IPS update on the Multi-Domain Security Management Server remains locked. |
|
PRJ-43560, PRHF-26971, PRJ-45051, PRHF-27847, PRJ-42549, PRHF-26016 |
Security Management |
In rare scenarios, in Multi-Site environments, Install Policy presets fail with "Timeout during task progress" or "You have reached the maximum number of active sessions". Refer to sk180897. |
|
PRJ-45061, PRHF-28094 |
Security Management |
In large Multi-Domain Security Management environments, login to SmartConsole may fail while High Availability synchronization is running. Refer to sk180858. |
|
PRJ-44452, PRHF-27276 |
Security Management |
In rare scenarios, in Multi-Domain Security Management environments with many administrators that have custom permissions, SmartConsole is slow, and operations take longer than usual. Refer to sk180681. |
|
PRJ-44096, PRHF-27460 |
Security Gateway |
In some scenarios, the FWD process may unexpectedly exit and cause a short outage related to the BGP failure. |
|
PRJ-44233, PRHF-27318 |
Security Gateway |
After policy installation, a VSX High Availability Cluster member may have a failover and generate a vmcore. |
|
PRJ-44082, PRHF-26620 |
Security Gateway |
In an Active/Standby cluster, when downloading a file using FTP protocol, the FWK process may unexpectedly exit, and a core dump file is generated. |
|
PRJ-44921, PRHF-27936 |
Security Gateway |
After an upgrade, memory usage may increase on all Security Group Members, and the " |
|
PRJ-46341, PRHF-28674 |
Security Gateway |
In rare scenarios, memory corruption occurs during packet correction requiring fragmentation, this may cause the Security Gateway crash or freeze. |
|
PRJ-45085, PMTR-90817 |
Security Gateway |
Latency when the Anti-Virus Software Blade processes ThreatCloud response. |
|
PRJ-42586, PMTR-88424 |
Threat Prevention |
When using a host with automatic static NAT in a Threat Prevention policy object, the rule may not be enforced. |
|
PRJ-44552, PRHF-27765 |
Threat Prevention |
In some scenarios, the FWD process unexpectedly exits, and the Security Group Members state flaps between Active and Down during an Anti-Bot Software Blade update. |
|
PRJ-44317, PRHF-27270 |
Content Awareness |
When Content Awareness Software Blade is enabled, there is a limitation of the file size (sk118516). However, when the source object of the Content Awareness rule does not match the current connection, the limitation is not applied on this connection. |
|
PRJ-44384, PRHF-27645 |
Application Control |
A buffer overflow may occur and cause the FWD process to exit. This leads to the Security Group Members in a Maestro environment change from Active to Down state and creates instability. |
|
PRJ-42715, PRHF-26557 |
IPS |
In a rare scenario, the Security Gateway may crash during an IPS package update. |
|
PRJ-44456, PRHF-27561 |
ClusterXL |
After several failovers in a cluster, connections may fail to synchronize. This can cause a timeout and the "first packet isn't syn" drops. |
|
PRJ-44678, PRHF-27803 |
SecureXL |
After an upgrade, packets passing through a Remote Access VPN tunnel in a VSX environment may be silently dropped. |
|
PRJ-44875, PRHF-27540 |
SecureXL |
Traffic may be dropped and the FWACCEL core file is generated. |
|
PRJ-44925, PMTR-90799 |
Routing |
When PIM and state refresh are enabled, the state refresh message may not be sent automatically after a failback in ClusterXL HA Primary Up mode. |
|
PRJ-46129, ROUT-2801 |
Routing |
The ROUTED daemon may unexpectedly exit when aggregating routes with long AS paths. |
|
PRJ-44941, PRHF-23766 |
Routing |
After an update, multicast traffic may be dropped. |
|
PRJ-44693, ROUT-2353 |
Routing |
Cluster member may stop sending multicast PIM traffic after failover or a reboot. Refer to sk180669. |
|
PRJ-41031, PRHF-25024 |
Routing |
The ROUTED daemon may unexpectedly exit and generate core dumps after OSPF neighborship was established, but did not advertise routes. Lost routing causes the network to be down. |
|
PRJ-43596, PRHF-27185 |
VPN |
Stability issues for Data connections (RDP / RTP / FTP/ETC). Refer to sk179651. |
|
PRJ-46438 |
GaiaOS |
Memory allocation issue may occur during initialization time. |
Take 10
Released on 23 April 2023 and declared as Recommended on 30 April 2023
|
ID |
Product |
Description |
|---|---|---|
|
Take 10 - Improvements and Resolved Issues |
||
PRJ-45903 |
Scalable Platforms |
After installing R81.20 Jumbo Hotfix Accumulator Take 8 on Maestro Security Group Members (SGMs), they may reboot several times and stay in Down state with a "Configuration" pnote. This issue occurs on Maestro SGMs with Identity Awareness enabled and SGMs configured to learn Identities from remote PDPs. Refer to sk180862. See Critical Information for R81.20 Jumbo Hotfix Accumulator. |
Take 8
Released on 07 March 2023
|
ID |
Product |
Description |
|---|---|---|
|
Take 8 - New Functionality |
||
|
PRJ-42694, PMTR-88560 |
Security Management |
NEW: Added ability to run the Management API command " |
|
PRJ-40017 |
Security Management |
NEW: Central Deployment of Hotfixes and Version Upgrades in SmartConsole will now support clusters of Centrally Managed Spark Firewall Appliances that run R81.10.XX firmware versions. |
|
PRJ-41769, PMTR-86000 |
CPView |
NEW: Integrated Skyline, a solution that provides an OpenTelemetry CPView Agent service to monitor your Check Point Servers and export health metrics from the CPView tool to an external location. Refer to sk178566. |
|
PRJ-43896, PMTR-89750 |
Security Gateway |
NEW: We have extended the grace period of Compliance Software Blade to support you for 90 days following contract expiration to continue providing the best security value during the renewal process. |
|
PRJ-43808, PMTR-89699 |
Application Control, URL Filtering |
NEW: We have extended the grace period of Application Control and URL Filtering Software Blade to support you for 90 days following contract expiration to continue providing the best security value during the renewal process. |
|
PRJ-43911, PMTR-89774 |
SmartView |
NEW: We have extended the grace period of SmartEvent Software Blade to support you for 90 days following contract expiration to continue providing the best security value during the renewal process. |
|
PRJ-44256, PMTR-90165 |
Threat Extraction |
NEW: We have extended the grace period of Threat Extraction Software Blade to support you for 90 days following contract expiration to continue providing the best security value during the renewal process. |
|
PRJ-42165, PMTR-87948 |
IPS |
NEW: Added ability to block "HTTP 206 partial content" responses from resources with malicious content. |
|
Take 8 - Improvements and Resolved Issues |
||
|
PRJ-41947, PMTR-87634 |
Security Management |
UPDATE: Connecting a Security Management Server to Check Point Portal is now supported in the Full High Availability Cluster (when each cluster member has a Security Management Server and a Security Gateway). |
|
PRJ-42028, PMTR-87761 |
Security Management |
UPDATE: When adding R81.10 or lower Security Gateways to a Threat Prevention policy with Zero Phishing Software Blade, a verification error will be shown. |
|
PRJ-42563, PRJ-42564 |
Security Management |
UPDATE: It is now possible use multiple values when filtering in these views:
|
|
PRJ-42554, PRHF-22345 |
Security Management |
UPDATE: Added an option to configure the maximum number of IPS SNORT rules. These lines should be added at the end (or their value should be changed if they already exist) in the $FWDIR/conf/malware_config file (on MDS, also in the $MDS_FWDIR/conf/malware_config file):
Refer to sk136515. |
|
PRJ-42034, PMTR-87522 |
Security Management |
UPDATE: Added a new Management API command " |
|
PRJ-42307, PRHF-25869 |
Security Management |
UPDATE: Improved the "Purge revisions" operation to reduce the size of the database. |
|
PRJ-42982, ODU-747 |
Web SmartConsole |
UPDATE: Released Take 76 with new features and improvements. Refer to sk170314. |
|
PRJ-44560, PMTR-90438 |
Security Gateway |
UPDATE: Apache HTTPD version was updated from 2.4.53 to 2.4.55 to fix CVE-2022-37436. |
|
PRJ-42373, PRHF-21182 |
Security Gateway |
UPDATE: The " |
|
PRJ-42659, TPP-2280 |
IPS |
UPDATE: In several IPS protections, improved performance for traffic that contains repeated sections. |
|
PRJ-42704, ODU-494 |
Threat Prevention |
UPDATE: Added Update 16 of Autonomous Threat Prevention Management integration Release. Refer to sk167109. |
|
PRJ-42260, PRJ-42201 |
Threat Prevention |
UPDATE: Reduced loading time of big external Custom Intelligence Feeds. |
|
PRJ-41381, PRHF-24483 |
VPN, Multi-Portal |
UPDATE: Added a new Registry parameter " |
|
PRJ-44248, PRHF-27306 |
VPN |
UPDATE: When the VTI MTU is different from the physical MTU, the physical MTU is used for sending packets by default.
Refer to sk98074. |
|
PRJ-42405, PMTR-87600 |
VSX |
UPDATE: Added more logs related to Pushing VSX Configuration.
|
|
PRJ-42875, ODU-611 |
Gaia OS |
UPDATE: Gaia API updates will now be automatically installed through AutoUpdater. Refer to sk165653. |
|
PRJ-43614, PRHF-26959 |
Gaia OS |
UPDATE: Gaia Cloning Groups will now use the highest TLS version available. |
|
PRJ-43048 |
CloudGuard Network |
UPDATE: Added support for Data Centers in AWS eu-central-2 (Zurich) and eu-south-2 (Spain) and ap-south-2 (Hyderabad) regions. |
|
PRJ-43028, PRJ-43025 |
CloudGuard Network |
UPDATE: Added support for connecting to VMware NSX-T 4.0.0.x and higher. |
|
PRJ-41847, PRHF-25754 |
CloudGuard Network |
UPDATE: Improved handling of NSX-T API responses. |
|
PRJ-42015, PRJ-42149 |
CloudGuard Network |
UPDATE: Improved performance of pushing Data Center Objects changes to Security Gateways. |
|
PRJ-41649, MBS-16088 |
Scalable Platforms |
UPDATE: Upon member state change to Active, there may be minor packet drops. Added an option to not forward traffic to a new Active member until all connections are synchronized to it. To enable this option:
To disable this option:
|
|
PRJ-43405, PMTR-89295 |
Diagnostics |
Skyline may not show any information. Refer to sk180748. |
|
PRJ-42111, PRHF-25747 |
Security Management |
The date of a policy configured with "accelerated installation" may not be updated in logs. |
|
PRJ-43902, SMB-19002 |
Security Management |
On R77.20 Spark Firewall appliances with some IPS packages, policy installation fails with the "Operation failed, install/uninstall has been improperly terminated" error. Refer to sk180448. |
|
PRJ-41763, PRHF-25381 |
Security Management |
In some scenarios, the CME process fails to start. |
|
PRJ-43341, PMTR-89193 |
Security Management |
In some scenarios, Audit logs may not be created when running remote API commands from Check Point Portal. |
|
PRJ-42411, PRHF-26108 |
Security Management |
Login to the Security Management Server or Multi-Domain Security Management Server may fail with the "Connection timeout" error. |
|
PRJ-44564, PRHF-27782 |
Security Management |
In a rare scenario, OCSP response cash located in the $CPDIR/tmp/curl_crl_ocsp directory may take a lot of memory. |
|
PRJ-35072, PMTR-89310 |
Security Management |
High Availability synchronization fails when one Management Server is installed on an appliance of 6000 series and the other one is an Open Server, a Virtual Machine, or installed on an appliance of different series. |
|
PRJ-43095, PRHF-25895 |
Security Management |
After configuring an IoC feed on the Global Domain and assigning a Global Policy, Threat Prevention policy installation in the local Domain fails. |
|
PRJ-43364, PMTR-87860 |
Security Management |
Editing a Global Assignment object using Ansible may fail. |
|
PRJ-43318, PMTR-87565 |
Security Management |
In SmartConsole, when editing a tagged Security Gateway object, the tags may get removed. |
|
PRJ-43315, PMTR-88093 |
Security Management |
Running API commands with the " |
|
PRJ-44023, PRHF-27405 |
Security Management |
When using Custom Application/Site Group objects in an Access policy, policy installation may fail with an "Internal error" message. |
|
PRJ-42244, SMB-19124 |
Security Management |
Installing a large Access Control policy on Spark Firewall Appliances may fail due to high memory consumption on the Security Management Server caused by FW_LOADER. |
|
PRJ-42798, PRHF-24308 |
Security Management |
The FWM process may frequently exit. This causes SmartConsole authentication to fail and dashboards that were opened before to get closed. |
|
PRJ-44485, PRHF-27877 |
Security Management |
The Management API command " |
|
PRJ-41977, PRHF-25682 |
Security Management |
The /var/log/dump/usermode/ directory on the Management Server may contain core dump files for the FWM process. Refer to sk180119. |
|
PRJ-43688, PMTR-89520 |
Security Management |
When running the Management API command " |
|
PRJ-41557, PRHF-25556 |
Security Management |
After an Application Control update, policy installation may fail. |
|
PRJ-42061, PRHF-25730 |
Security Management |
The " |
|
PRJ-44630, PMTR-90519 |
Security Management |
There may be many duplicates of OCSP response in the $CPDIR/tmp/curl_crl_ocsp directory. |
|
PRJ-42860, PRHF-26649 |
Security Management |
After performing the "Revert to Revision" operation, new Audit logs cannot be seen in the Logging&Monitoring View in SmartConsole. |
|
PRJ-42510, PRHF-26349 |
Security Management |
Access policy verification may fail when dynamic objects exist in the NAT policy. |
|
PRJ-41672, PRHF-25452 |
Security Management |
When using CME (Cloud Management Extension), the FWM process may unexpectedly exit because of a memory issue. |
|
PRJ-41929, PRHF-25575 |
Security Management |
After an upgrade, while installing a policy, SmartConsole may unexpectedly close with a "The connection with the server was lost. Any unsaved changes will be preserved" message. Refer to sk180294. |
|
PRJ-41893, PRHF-25534 |
Security Management |
High Availability synchronization fails if automatic purge is configured to run on the Standby Management Server. |
|
PRJ-42043, PRHF-25899 |
Security Management |
In a rare scenario, the Show Package tool and some Management API commands with " |
|
PRJ-43313, PMTR-88097 |
Security Management |
The API command " |
|
PRJ-41921, PRHF-25795 |
Multi-Domain Security Management |
In rare scenarios, in a Multi-Domain Security Management Server environment, a memory leak may occur in the FWM process. This may cause the process to exit. |
|
PRJ-42850, PRHF-26378 |
Multi-Domain Security Management |
In a Multi-Domain Security Management environment, traffic may not match rules with custom applications. |
|
PRJ-42106, PRHF-25807 |
Multi-Domain Security Management |
In a Multi-Domain Security Management environment, the HitCount retention mechanism may prematurely remove the HitCount data. |
|
PRJ-42050, PRHF-25759 |
Multi-Domain Security Management |
In rare scenarios in a Multi-Domain Security Management environment:
|
|
PRJ-42303, PRHF-25848 |
Multi-Domain Security Management |
Reassigning a Global Domain to a local Active Domain from one MDS to another may result in the local domain not reflecting recent changes. The issue occurs in Multi-Site environments if two Multi-Domain Security Management Servers (MDS) have a Standby Global Domain. |
|
PRJ-43176, PMTR-88159 |
SmartConsole |
SmartConsole installation folder contains screenshots of legacy demo documents. |
|
PRJ-41610, PMTR-86559 |
SmartProvisioning |
Deleting an LSM Gateway via REST API does not revoke the device's VPN certificate. |
|
PRJ-42085, PRHF-25916 |
CPView |
A typo in "Dropped fragmentation violation" in CPView > Advanced > SecureXL > Drops. |
|
PRJ-43590, PMTR-89477 |
CPView |
In a Multi-Domain Security Management environment, Skyline is down after |
|
PRJ-43672, PMTR-89535 |
CPView |
The Network-per-CPU tab under CPVIEW > Advanced > SecureXL does not show traffic distribution for all CPUs. Refer to sk180540. |
|
PRJ-42415, PRHF-26316 |
Logging |
When LEA spawning is turned off (sk91343), the FWD process may run out of memory. |
|
PRJ-41853, PRHF-23629 |
Logging |
After an upgrade and change of the Security Management Server name, logs created before the upgrade are unavailable. |
|
PRJ-43394, PRHF-26905 |
Logging |
When working with Multi-Domain Security Management, Virtual Systems (VS's) may be unable to send logs to the management because the Log Server constantly disconnects. |
|
PRJ-42818, PMTR-88623 |
Security Gateway |
The Security Gateway may crash when running a memory leak detection procedure. |
|
PRJ-43134, PRHF-24896 |
Security Gateway |
When using the SMTP service with resource objects in a rule and NAT is configured for the destination IP address, the traffic may match the Cleanup rule instead. |
|
PRJ-43012, PRHF-26600 |
Security Gateway |
When adding a new RADIUS Server to Gaia, its IP address is automatically added to MDPS tasks, but when deleting this Server, the MDPS task is not deleted. |
|
PRJ-42297, PRHF-26094 |
Security Gateway |
When MDPS is configured, |
|
PRJ-42945, PRHF-26610 |
Security Gateway |
When Anti-Spoofing is enabled, the Security Gateway may crash. |
|
PRJ-43840, PRHF-27097 |
Security Gateway |
The Security Gateway may receive duplicated traffic (such as non-IP protocol connections) for IPS inspection. This can trigger high CPU usage and result in failures to connect over SSH or policy installation. |
|
PRJ-42708, PRHF-26247 |
Security Gateway |
DNS parser incorrectly handles additional records, which results in appearing additional DNS IP addresses in the FQDn objects list. |
|
PRJ-43619, PRHF-21529 |
Security Gateway |
The Security Gateway may frequently crash with vmcore files, recording invalid context. |
|
PRJ-43887, PRHF-26861 |
Security Gateway |
In some scenarios, the FWD process is stuck during policy installation. |
|
PRJ-43706, PRHF-27184 |
Security Gateway |
The Security Gateway may crash during policy installation if the Rule Base has multiple layers and many interfaces on the Security Gateway (VLANs). |
|
PRJ-43555, PRHF-26844 |
Security Gateway |
Security Gateway may drop traffic when Dynamic Anti-Spoofing is enabled. |
|
PRJ-41635, PRHF-25363 |
Security Gateway |
Dynamic Dispatcher may send fragments of the same packet to different Firewall instances during a high load of fragmented traffic. This may cause some packets to drop. |
|
PRJ-43529, PMTR-89421 |
Security Gateway |
In rare scenarios when ISP Redundancy feature is enabled, default route disappears after policy installation. |
|
PRJ-42805, PRHF-23758 |
Security Gateway |
Stability issues when ICAP client is active. |
|
PRJ-41496, PRHF-24787 |
Security Gateway |
Stability issues when ICAP client is active. |
|
PRJ-41092, PRJ-34903 |
Security Gateway |
A kernel crash may occur during system shutdown when PIM is enabled. |
|
PRJ-43344, PMTR-88981 |
Security Gateway |
A connection may be closed with the "ws_mux_handle_poll: ERROR: Poll flag still set after unsetting" error in the $FWDIR/log/fwk.elg file, when HTTP parser does not receive requested data. |
|
PRJ-41791, PRJ-41721 |
Security Gateway |
The Security Gateway with enabled Anti-Virus may experience a memory allocation issue. |
|
PRJ-42973, MBS-16324 |
Security Gateway |
The Security Gateway on a LightSpeed appliance may crash when a Bond interface is configured on the LightSpeed 10/25/40/100G QSFP28 Ports, and the state of this Bond interface changes between on / off, or off / on. |
|
PRJ-41796, PRJ-41720 |
Security Gateway |
The Security Gateway with enabled Anti-Virus Software Blade may experience a memory allocation issue. |
|
PRJ-43143, PRJ-43197 |
Security Gateway |
Policy installation from R81/R81.10 Security Management Server on R81.20 Security Gateway fails if Autonomous Threat Prevention mode is enabled. |
|
PRJ-43801, PMTR-89661 |
Security Gateway |
When handling some RTSP connections and the Hyperflow feature is enabled the Security Gateway may crash. |
|
PRJ-43128, PMTR-89008 |
Security Gateway |
Some TCP connections may be stuck in "Both-Fin" state in the SecureXL connection table and cause high memory consumption. |
|
PRJ-41865, PRHF-25769 |
Security Gateway |
After an upgrade, it is not possible to monitor Security Gateways with enabled Management Data Plane Separation (MDPS). |
|
PRJ-43534, PRHF-26097 |
Security Gateway |
In some scenarios, the Security Gateway may frequently crash, causing outages. |
|
PRJ-41422, PRHF-24690 |
Security Gateway |
The Security Gateway may send multiple "Failed to fetch Check Point resources. Timeout was reached" logs. |
|
PRJ-41791, PRJ-41721 |
Security Gateway |
The Security Gateway with enabled Anti-Virus Software Blade may experience a memory allocation issue. |
|
PRJ-43779, PMTR-89539 |
Security Gateway |
When working in VSX Load Sharing (VSLS) mode, the FWK process may unexpectedly exit. |
|
PRJ-43671, PMTR-89323 |
Multi-Portal |
In a rare scenario, the MPDAEMON process may fail to start on one of the cluster members. |
|
PRJ-41472, PRHF-25382 |
Internal CA |
When managing cloud Gateways, the FWM process memory usage may increase. |
|
PRJ-42904, PRHF-26659 |
Internal CA |
The certificate in SmartConsole is shown as valid, although it is expired. |
|
PRJ-41599, PRHF-25439 |
Threat Prevention |
Anti-Virus Software Blade fails to parse external IoC feeds that contain commas in the CSV column field value. |
|
PRJ-42022, PMTR-88108 |
Threat Prevention |
Some logs with IP observables from custom intelligence feeds may be suppressed, although they contain different IP addresses. |
|
PRJ-41483, PMTR-88110 |
Threat Prevention |
Custom intelligence feeds load may fail because of a parsing issue. |
|
PRJ-42287, PRHF-26079 |
Threat Prevention |
The " |
|
PRJ-42196, PMTR-88923 |
Threat Prevention |
Files related to IoC may not be entirely removed from the disk after the feed removal. |
|
PRJ-42365, PRJ-41688 |
Threat Prevention |
In some scenarios, a "malware_res_rep_rad_query: rad_kernel_malware_request_prepare() failed" message may appear in the /var/log/messages file. |
|
PRJ-42586, PMTR-88424 |
Threat Prevention |
When using a host with automatic static NAT in a Threat Prevention policy object, the object will not be enforced. |
|
PRJ-41637, PRA-3254 |
Threat Prevention |
The Security Gateway becomes unresponsive when loading external IoC feeds on a Security Gateway with the EXT3 filesystem. |
|
PRJ-43367, PRJ-43360 |
Threat Extraction |
In some scenarios, Mail Transfer Agent (MTA) does not scan files with an unsupported extension if they were renamed to ".exe". |
|
PRJ-43504, PRHF-26475 |
Application Control |
Policy installation may fail with an "Error 0-200184" message because of memory allocation issues. |
|
PRJ-42507, PRHF-26186 |
Application Control |
In a rare scenario, when Application Control is enabled, the Security Gateway in AWS Cloud may crash. The issue does not occur if Application Control database on the Security Gateway is updated with Release 141122_1 and higher. |
|
PRJ-43000, PRHF-24890 |
Identity Awareness |
In a rare scenario, disconnection between the Identity Server (PDP) and Identity Gateway (PEP) leads to missing identities on the PEP side. |
|
PRJ-42340 |
Identity Awareness |
In a VSX High Availability cluster, a member in the Backup state should remain idle, but it opens connections for identity sharing. |
|
PRJ-42934, PMTR-88806 |
Identity Awareness |
The PDPD process may cause CPU spikes during cluster failover. |
|
PRJ-42996, PRHF-23473 |
Identity Awareness |
There may be connectivity issues and high CPU spikes on PDP when installing policy. |
|
PRJ-43731, PRHF-25083 |
Identity Awareness |
Connectivity issue may occur during Azure AD Group fetch, and the "get_http_error_msg - http code is 401" error response is shown in Identity Awareness logs. |
|
PRJ-42592, PMTR-88426 |
IPS |
The Security Gateway may crash during policy installation because of a memory allocation problem. |
|
PRJ-41656, PRHF-25585 |
IPS |
Running the " |
|
PRJ-41464, PRHF-25330 |
IPS |
When Anti-Virus is enabled, the Mail Transfer Agent (MTA) log files may get blocked because of fail-close operation. |
|
PRJ-43584, PRHF-27076 |
DLP |
A memory leak may occur in the DLPU process. |
|
PRJ-43829, PMTR-89510 |
Anti-Virus |
When the RAD process exits with a timeout, the Software Blade name shown in the SmartConsole log card is incorrect. |
|
PRJ-44010, PMTR-89738 |
Anti-Virus |
The $FWIDR/log/fwk.elg file may be flooded with the "match_cb for CMI APP 11 - CI AV failed on context 144, executing context 366 and adding the app to apps in exception" messages because of improper parsing of HTTP headers by Anti-Virus Software Blade. |
|
PRJ-43414, PMTR-87254 |
SSL Inspection |
In a rare scenario, the WSTLSD process may unexpectedly exit and produce a core dump file during certificate chain verification. |
|
PRJ-43182, PRHF-26878 |
SSL Inspection |
The WSTLSD process may unexpectedly exit and create core dump files. |
|
PRJ-43892, PRHF-26317 |
SSL Inspection |
In rare scenarios, the FWK and/or WSTLSD processes may unexpectedly exit and create a core dump during certificate validation. Refer to sk180473. |
|
PRJ-43359, PRJ-43681 |
SSL Inspection |
In some scenarios, Inbound HTTPS Inspection may fail when working in USFW (User-Space Firewall) mode. |
|
PRJ-42152, PRJ-41973 |
Mobile Access |
After an upgrade, it may not be possible to connect to SNX, it gets stuck when initializing. |
|
PRJ-44292, PRHF-27598 |
Mobile Access |
Some web applications which use PT or UT link translation methods may have issues after a browser upgrade. |
|
PRJ-42469, PRHF-26292 |
Mobile Access |
When Mobile Device Management (MDM) cooperative enforcement feature is enabled, establishing a VPN connection fails while the HTTPD log incorrectly indicates a compliance issue. |
|
PRJ-43226, PRHF-25249 |
Mobile Access |
Web applications may not work correctly when Mobile Access Software Blade is configured in Hostname Translation (HT) mode while the " |
|
PRJ-43618, PRHF-25371 |
Mobile Access |
Access to a web application that uses WebSocket protocol may not be possible. |
|
PRJ-41728, PRHF-24710 |
ClusterXL |
The " |
|
PRJ-43117, PMTR-87809 |
ClusterXL |
The " |
|
PRJ-43004, PRHF-26722 |
ClusterXL |
Traffic does not pass through the GRE tunnel when Virtual MAC (VMAC) is enabled. Refer to sk180292. |
|
PRJ-44169, PRHF-27330 |
ClusterXL |
When handling HTTP/2 traffic, cluster members may crash, generating vmcores. |
|
PRJ-42929, PMTR-88804 |
ClusterXL |
A Hide NAT port may be allocated twice causing the "out of state" drops. |
|
PRJ-42465, PRHF-26264 |
ClusterXL |
Stability issues may occur in a Multi-Version Cluster (MVC) when VPN is enabled. |
|
PRJ-42576, PRHF-25865 |
SecureXL |
Multicast traffic may get dropped, and no logs are generated. |
|
PRJ-44132, PMTR-89935 |
SecureXL |
IPv6 template is not created when the connection is NATed. |
|
PRJ-43980, PMTR-89372 |
SecureXL |
In a rare scenario, a CPAQ message sent during policy push does not have critical priority, and can be dropped when the Security Gateway is busy. |
|
PRJ-42897, PRHF-26517 |
SecureXL |
SecureXL may drop traffic when HTTPS Inspection is enabled on a VSX Security Gateway with a Virtual Router. |
|
PRJ-42446, PRHF-26215 |
SecureXL |
The Security Gateway may prematurely expire half-closed TCP connections and drop VoIP and HTTPS packets with "First packet isn't SYN". |
|
PRJ-42074, PRHF-25880 |
SecureXL |
In some scenarios, the change of the |
|
PRJ-43923, ROUT-2460 |
Routing |
Failover may take longer than expected and traffic does not pass for several seconds because dynamic routes are lost. |
|
PRJ-41709, PRHF-25613 |
Routing |
The ROUTED process may unexpectedly exit when the route does not have a next hop. |
|
PRJ-43411, PRHF-6347 |
Routing |
The ROUTED daemon may repeatedly exit when using PIM in Sparse mode (SM). |
|
PRJ-41725, PRHF-25460 |
Routing |
The " |
|
PRJ-44373, PMTR-88972 |
Routing |
OSPF routes may not be redistributed after reboot. |
|
PRJ-44260, PRHF-27407 |
Routing |
The ROUTED daemon may unexpectedly exit when using PIM and source IP address is set "0.0.0.0". |
|
PRJ-42381, PMTR-87326 |
VPN |
The IKED process unexpectedly exits when the "Aggressive SLP" (Simultaneous Login Prevention) feature is enabled. |
|
PRJ-44945, PRHF-28050 |
VPN |
When many users in nested groups login using Remote Access Client \ connect to VPN, and the LDAP topology is large, there may be a spike of CPU usage and performance impact. Refer to sk180664. |
|
PRJ-42176, PRHF-24166, PRJ-43714, PRHF-27256, PRJ-42654, PRHF-26482 |
VPN |
Refer to sk180530. |
|
PRJ-42730, PRHF-26453 |
VPN |
In a rare scenario, when IPv6 is configured, and VPN is enabled, policy installation may cause a stability issue. |
|
PRJ-43387, PRHF-27010 |
VPN |
After an upgrade, an incorrect IPSec users counter may be displayed in SmartView Monitor or when running the " |
|
PRJ-43551, SDWANGW-1205 |
VPN |
VPN stability issues. |
|
PRJ-43300, PRHF-26853 |
VPN |
Stability issues for Data connections (RDP / RTP / FTP / ETC). Refer to sk179651. |
|
PRJ-42562, PRHF-26325 |
VPN |
When the user connects with RADIUS authentication method, the "Authentication method" value in Mobile Access logs is shown as empty. |
|
PRJ-43348, PRHF-25367 |
VPN |
StrongSWAN Remote Access client can connect but fails to access internal resources. |
|
PRJ-42880, PRHF-26241 |
VPN |
When initiating IKEv2 tunnel from Check Point to a third party, creating Child SA fails. Refer to sk180281. |
|
PRJ-41561, PRHF-25552 |
VPN |
After an upgrade, the community name may not be visible from SmartView Monitor, and the " |
|
PRJ-42763, PRHF-26567 |
VPN |
Despite the Secure Configuration Verification (SCV) exceptions being configured to not apply for connections, the strongSWAN client's traffic is dropped with the "Client's configuration is not verified" error. |
|
PRJ-41698, VSX-2670 |
VSX |
The " |
|
PRJ-40976, PRHF-23107 |
VSX |
SecureXL may not let HTTPS traffic pass through a Virtual Router (VR). |
|
PRJ-43005 |
VSX |
Some connections inspected by Threat Prevention Software Blade may not be closed successfully, which leads to connectivity issues. |
|
PRJ-43357, PMTR-89245 |
VSX |
The SNMPD process may consume a high CPU in a VSX environment and there may be slowness when using the " |
|
PRJ-43652, PRHF-27195 |
Gaia OS |
When setting password hash on cloning group members, some members may not get updated. |
|
PRJ-42527, PRHF-26323 |
Gaia OS |
Gaia backup fails with "Cannot complete the backup process: not enough space in /var/log/CPbackup/backups" although there is enough free disk space in the /var/log/ partition. Refer to sk180181. |
|
PRJ-42646, PRJ-43428 |
Gaia OS |
In some scenarios, the " |
|
PRJ-42963, PRHF-26713 |
Gaia OS |
IPv6 address may be removed from bond VLAN interface when changing bond xmit-hash-policy configuration. Refer to sk180309. |
|
PRJ-42221, PRHF-25947 |
Gaia OS |
Incorrect logs are printed in the /var/log/httpd2_error_log file when logging into the Gaia Portal. |
|
PRJ-42625, PRHF-26432 |
Gaia OS |
SNMP trap may not be sent after a cluster failover if it occurred by running the " |
|
PRJ-44162, PRJ-43959 |
Gaia OS |
When uninstalling a Jumbo Hotfix, some of the Management API commands may not work. The " |
|
PRJ-43564, PRHF-27096 |
Gaia OS |
When restoring a backup with VSX objects, the objects database may not be restored on the newly installed Security Management Server. |
|
PRJ-42930, PRHF-24249 |
Gaia OS |
When running the " |
|
PRJ-44239, PRHF-27526 |
Gaia OS |
The System Backup page in the Cloning Group view may be empty, although a scheduled backup was added. |
|
PRJ-43987, PRHF-27222 |
Gaia OS |
The " |
|
PRJ-42195, PRHF-25359 |
Gaia OS |
When configuring Gaia Cloning Group mode on the cluster, members with "off" state appear without an IP address and the "adding notification Member mvc is down" error is displayed. |
|
PRJ-42255, PRHF-26113 |
Gaia OS |
Running the " |
|
PRJ-41687, PRHF-25430 |
Gaia OS |
In a cloning group cluster, when allowed hosts are changed from "Any" host to a specific host, communication between members is blocked, and the group cannot function. |
|
PRJ-43263, PRJ-43140 |
Gaia OS |
After an upgrade, the RADIUS Server is unavailable and authentication fails. |
|
PRJ-41614, PMTR-87176 |
Gaia OS |
Information about scheduled backup failure is now displayed in Clish, Gaia Portal, and in the error message inside the log file. |
|
PRJ-43133, PMTR-88415 |
Harmony Endpoint |
Endpoint Web Management service may fail to delete old logs. |
|
PRJ-42954, PMTR-88744 |
Harmony Endpoint |
In an environment with the Endpoint Security Server, Jumbo Hotfix Accumulator installation may take a long time. |
|
PRJ-43069, PRHF-26666 |
CloudGuard Network |
Importing objects from VMware vCenter may fail with a "Failed to fetch objects from the Data Center." message because of a rare communication issue between CloudGuard Network Security controller and VMware vCenter Data. |
|
PRJ-43579, PMTR-89444 |
CloudGuard Network |
When enabling debug mode with the " |
|
PRJ-43074, PRHF-26286 |
CloudGuard Network |
A Kernel-based Virtual Machine (KVM) or a Virtual Machine using SRIOV with the i40evf/ixgbevf network driver, may boot with non-optimized performance settings. |
|
PRJ-43260, PRHF-26750 |
CloudGuard Network |
Disabling or removing all network interfaces from a vCenter object is not dynamically reflected on the CloudGuard Controller Data Center object. |
|
PRJ-42011, PRHF-25644 |
CloudGuard Network |
When mapping of some Azure Subscriptions fails, assets of these Subscriptions are revoked from the Security Gateway. |
|
PRJ-42116, PRHF-25910 |
CloudGuard Network |
AWS Data Center mapping fails when a Subnet with only IPv6 addresses is added to Virtual Private Cloud (VPC). |
|
PRJ-43648, PMTR-88995 |
CloudGuard Network |
Connectivity issues may occur between the Security Gateway and cluster on Alibaba cloud. |
|
PRJ-41535, PRHF-11703 |
VoIP |
In some scenarios, when using early media with NAT, the first data connections specified in the SDP get closed, although they should not. And the new data connection does not open, resulting in one-way audio. Refer to sk179651. |
|
PRJ-42700, PRJ-42696 |
VoIP |
In some scenarios, when using static NAT, VoIP traffic may be affected. |
|
PRJ-43078, PRHF-26401 |
VoIP |
While handling a multi-INVITE scenario (where a user registers with multiple devices), and the VoIP SIP MultiCore feature is enabled, each SIP INVITE maybe be handled simultaneously on different FW instances and cause memory corruption. |
|
PRJ-41836, PRHF-25720 |
Scalable Platforms |
SNMP threshold events traps may be missing "Chassis ID" and "Blade ID" fields. Refer to sk179926. |
|
PRJ-42014, PRHF-24199 |
Scalable Platforms |
In a rare scenario, the FWK process may unexpectedly exit and bring down the Security Gateway Module (SGM). |
|
PRJ-42948, MBS-11024 |
Scalable Platforms |
Optimized the SNMP communication between Security Gateway Module (SGM) and Security Switch Module (SSM) to prevent timeouts. |
|
PRJ-43420, PRJ-43361 |
Scalable Platforms |
The " |
|
PRJ-43490, PRJ-43488 |
Scalable Platforms |
Running the " |
|
PRJ-44778, PRJ-44600 |
Scalable Platforms |
Uninstalling a Jumbo Hotfix from Maestro Orchestrator may cause the REST Server initialization to fail and lead to connectivity issues. |
|
PRJ-42754, PRHF-26604 |
Scalable Platforms |
When using the " |
|
PRJ-42193, PMTR-87997 |
Scalable Platforms |
Upgrade rollback may not be performed successfully on a Security Group if Security Gateways were upgraded via CPUSE to a new major version more than once. |
|
PRJ-43601, PRJ-43213 |
Scalable Platforms |
The task in " |
|
PRJ-42515, PMTR-88150 |
Scalable Platforms |
Upon failover/failback, multicast packets are sent to Active members only. The member that changed state from Down to Active starts receiving the multicast packets before the route is resolved. This may impact traffic. |
|
PRJ-43309, PRJ-43307 |
Scalable Platforms |
Minor packet drop may occur during Maestro Orchestrator graceful reboot. |