List of All Resolved Issues and New Features

Rule Base exported to CSV includes the columns previously checked for displaying, although they are currently unchecked.

UPDATE:

• In the VSX Cluster Wizard, "Check Point SecurePlatform (ClusterXL)" is renamed to "Check Point Gaia (ClusterXL)".

• Removed the platforms which are not supported platforms in this version: "Crossbeam Systems" and "Check Point IPSO VRRP".

When there are many network objects, opening the IPsec VPN tab in the Gateway object may take a long time.

Removed the IPS checkbox from Virtual Router settings in SmartConsole. This is a cosmetic fix.

When navigating under VPN Meshed Community view > Tunnel Management > Set Permanent Tunnels > On all tunnels of specific gateways, when there are more than four Gateways some are not visible.

When trying to navigate from the "Where Used" window to an object which is used in a nested inline layer, the "Failed to go to the requested rule" error is shown.

UPDATE: The Log4net library is updated to version 2.0.12.

UPDATE: Improved the style of the Rule base to make the border between layers clearer.

Trying to delete a cluster member without a valid cluster fails with a "<Cluster member name> can be deleted by editing the Cluster" message. Refer to sk116130.

Removing all Gateways that belong to a Domain from a Global VPN Community may cause SmartConsole to unexpectedly close when trying to open the Global VPN Community object.

Deleting the RADIUS group object named "Radius-Group" may fail with "Failed to delete object - Object 'Radius-Group' is used by a policy or by other objects". Refer to sk176824.

In some scenarios, when editing Exceptions in Inspection Settings, Gateways without IPS blade may be missing from the "Install On" list.

In some scenarios, when changing the netmask of an interface in VSX, the netmask of the member network does not change.

NEW: Added the "User creation date" field to the User creation editor.

UPDATE: The default timeframe for logs queries using the Logs tab is set to "Last 24 Hours".

• Requires R80.30 Jumbo Hotfix Accumulator Take 241 (or higher).

In the Logs view, logs for Global exception are shown with a different name.

When the Identity Awareness blade is enabled on an LSM profile, the LSM policy verification may fail.

Opening the Security Gateway editor from the VPN community editor in read-only mode may cause SmartConsole to close unexpectedly.

Login to SmartConsole fails if Brute force password guessing protection is set to more than 25 seconds.

• Requires R80.30 Jumbo Hotfix Accumulator Take 241 (or higher).

In scenarios with more than 100 Gateway objects, some views may not show some Gateways or display some of them as duplicates.

In rare scenarios, SmartConsole freezes when clicking on "System History" on Cluster or Gateway object.

In large environments, searching for specific devices in SmartProvisioning takes a long time.

In the Shared Policies section, under the Security Policies view, it is possible to select different options for Geo Policy, even when the mouse cursor is hovering over their lines and is not located in the radio button/checkbox itself. Refer to sk175748.

In some scenarios, the "Push CA Certificate" push operation in SmartEndpoint cannot be initiated and fails with exception.

Changes to the columns in the Global Exception view of the Threat Prevention Policy are not saved when changing to a different view, Refer to sk165833.

In some scenarios, copying a rule from one Access policy to another fails because of a mismatch in the policy's Traditional VPN mode.

• Requires R80.30 Jumbo Hotfix Accumulator Take 237 (or higher).

NEW: Added ability to download files from SmartConsole Extensions.

In some scenarios, the Policy installation history in the Access Tools view on a cluster member is not updated.

In SmartView Monitor, when the user sorts tables by the field "Connect Time", the sorting was not done according to date and time, but as a textual sorting.

SmartConsole title and borders for some windows may become transparent after upgrade to Windows10 build 20h2.

UPDATE: Removed the "Scan priority will be lower than other running processes" option from SmartEndpoint.

When creating a new gateway interface via SmartConsole and click "Get interfaces without the topology", new interfaces are visible. The first interface in the list "bond.0" is marked as edited.

In some scenarios, after search in Access policy, Hitcount shows incorrect information.

In rare scenarios, legacy SmartDashboard may unexpectedly close upon loading.

"N/A" is displayed instead of "Any" in the Protection drop-down menu under Inspection Settings > Core Protections > Exception editor window.

NEW:

• Added support for 1570R, 1600 and 1800 SMB Appliances.
• Added support for Threat Emulation blade on LSM profile of R80.20SMB gateways and clusters.
• Requires R80.30 Jumbo Hotfix Accumulator Take 227 (or higher).

UPDATE: Removed all exe files from data/util library and the old cpm_dir (Legacy demo).

• Requires R80.30 Jumbo Hotfix Accumulator Take 227 (or higher).

When there are many gateways and servers defined in a policy and administrator needs to scroll up and down to see them all, the links in the "Recommended Updates" column (in the "GATEWAYS & SERVERS" view) may jump to another row.

In some scenarios, the "Content" column does not appear in the Access policy view even if the Content Awareness blade is on one of its inline-layers.

When editing a "group with exclusion" object, the change may not be updated on its related objects. Refer to sk168873.

In some scenarios, an OPSEC Application editor may work slower than expected or freeze in environments with a very large number of network objects.

SmartConsole unexpectedly closes when the user defines a 1590 Branch Office Appliance with Dynamic IP and WiFi-LTE. Refer to sk167718.

When the mouse hovers on the Custom Application Group, "Error:Loading failed" may appear.

Group Services tooltip may show the wrong information in a specific scenario.

NEW: Added support for BitLocker Encryption Management in Full Disk Encryption.

• Requires R80.30 Jumbo Hotfix Accumulator Take 219 (or higher).

NEW: Added a new SmartView Report for SandBlast Threat Extraction, providing visibility for sanitized files in mail and web downloads including cleaned file types and cleaned active and embedded content.

UPDATE: Do not use the Sticky Decision Function checkbox for ClusterXL Load Sharing. Use the ccl_force_sticky parameter instead. For more information, see sk162637.

It is not possible to view logs in Install Policy Presets view, if the selected policy name contains spaces or "slash" characters.

Login with CAPI certificate may cause SmartConsole to unexpectedly close.

NEW: Performance improvement for Multi-Domain environments with many administrators connected. Refer to sk166059.

NEW: Added support for Check Point 3800, 6400, 6700, 7000, 16200, 16600HS, 28000 and 28600HS appliances. Refer to sk110052, sk139932 and sk152733.

• Requires R80.30 Jumbo Hotfix Accumulator Take 210 (or higher).

After overriding the logging or the Packet Capture option for an IPS protection, the protection might be shown as disabled. This is only a display issue.

NEW: Added a list item count inside the User Group, Network Group and Service Group editors. The item count supports only one level of nesting. If a group includes another group, only one object is counted (users, network and services from the nested group are not counted).

NEW: Added section in SmartConsole.exe.config file that allows defining the per-server custom connection ports for FWM and CPM processes.

In some scenarios, it is not possible to enable the Threat Emulation blade for a Security Gateway.

In a rare scenario, SmartConsole may unexpectedly close when closing a window of Revert to Revision, Central Deployment, Infinity Threat Prevention or a window hosting an extension (like Changes Report).

In some scenarios, when the user creates a new SIP Proxy object, no search option is available for related endpoints.

In some scenarios, the Anti-Spoofing checkbox appears as unchecked in Read-Only mode despite the fact that the checkbox is checked in Edit mode. Refer to sk163873.

NEW: Added ability for R80.30 Security Management or Multi-Domain Server to manage R80.40 Security gateway. Refer to sk164652.

• Requires R80.30 Jumbo Hotfix Accumulator Take 166 (or higher).

NEW: SmartConsole performance improvement when performing daily operations such as loading the rulebase, scrolling through the rule base and searching network objects.

When adding a Time object to Access Control rule, SmartConsole may unexpectedly close.

In some scenarios, the Menu option to view or edit cluster member object on Multi Domain's gateways view does not show the correct data.

In high latency environments, hovering over the Access Policy to view a tooltip may cause the user interface to freeze for a few seconds.

In some scenarios, the last update date of Threat Prevention protections appears as "N/A" in Protections View.

Incorrect last contact time might be displayed in the Users/Computers tab.

1500 series firmware packages do not appear in SmartProvisioning firmware upgrade options.

Compliance blade does not support "Hit count" in Best Practices, although this option exists in the GUI.

In some scenarios, uploading the E81.40 Endpoint Security client to the Security Management Server fails.

"An unexpected error occurred" message may appearin SmartEndpoint when clicking "Copy Cell to Clipboard". Refer to sk162713.

In a rare scenario, SmartConsole unexpectedly closes when trying to create a user with certificate.

NEW: Added a "Go To Rule" action to the Threat Prevention policy.

NEW: Domain name and IP address will be displayed first on the program buttons in the Windows Taskbar.

On some machines, the "Copy Cell to clipboard" feature might fail with the "Unknown error" message.

In some scenarios, the "Add to virtual group" action in "Users and Computers" tab is grayed out when selecting more than one node.

In a rare scenario, when user clicks on Mail Transfer Agent (MTA) options in the Security gateway settings or on "Next hop" column inside MTA settings, SmartConsole shows "Not Responding" and freezes.Refer to sk161232.

• Requires R80.30 Jumbo Hotfix Accumulator Take 71 (or higher).

In a rare scenario, SmartConsole unexpectedly closes when navigating to the "Device Information" window.

Added Management support for 16000 and 26000 appliances.

• Requires R80.30 Jumbo Hotfix Accumulator Take 71 (or higher).

In some scenarios, users cannot edit device's name or other properties in Media Encryption policy when this device is a member of a device group.

Cannot open SmartUpdate, SmartProvisioning, SmartEndpoint when SmartConsole path contains "#".

On Windows 10 with .Net framework 4.8, the view is not properly updated after scrolling up or down the name column in lists, combo box, pickers etc.