Validated Example

This example shows sample BGP configuration values and commands for a lab environment. Replace the sample values with values from your environment before deployment.

Validated Example

This example uses these lab values:

Primary region: Frankfurt
Primary peer: 169.254.100.100
Secondary region: Miami
Secondary peer: 169.254.200.100
LAN prefix: 50.50.50.0/24
Prepend count: 3

Replace the lab values with values from your environment. On a cluster, enter the commands identically on both members.

set bgp external remote-as 64512 on
                set bgp external remote-as 64512 import-routemap "sase_prim_in" preference 1 on
                set bgp external remote-as 64512 import-routemap "sase_sec_in" preference 2 on
                set bgp external remote-as 64512 peer 169.254.100.100 on
                set bgp external remote-as 64512 peer 169.254.100.100 multihop on
                set bgp external remote-as 64512 peer 169.254.100.100 graceful-restart on
                set bgp external remote-as 64512 peer 169.254.100.100 export-routemap "bgpout" preference 100 on
                set bgp external remote-as 64512 peer 169.254.200.100 on
                set bgp external remote-as 64512 peer 169.254.200.100 multihop on
                set bgp external remote-as 64512 peer 169.254.200.100 graceful-restart on
                set bgp external remote-as 64512 peer 169.254.200.100 export-routemap "bgpout_sec" preference 100 onset routemap bgpout id 500 on
                set routemap bgpout id 500 allow
                set routemap bgpout id 500 match as 64512 on
                set routemap bgpout id 500 match network 50.50.50.0/24 all
                set routemap bgpout id 500 match protocol directset routemap bgpout_sec id 500 on
                set routemap bgpout_sec id 500 allow
                set routemap bgpout_sec id 500 match as 64512 on
                set routemap bgpout_sec id 500 match network 50.50.50.0/24 all
                set routemap bgpout_sec id 500 match protocol direct
                set routemap bgpout_sec id 500 action aspath-prepend-count 3set routemap sase_prim_in id 10 on
                set routemap sase_prim_in id 10 allow
                set routemap sase_prim_in id 10 match neighbor 169.254.100.100 on
                set routemap sase_prim_in id 10 action preference 1set routemap sase_sec_in id 10 on
                set routemap sase_sec_in id 10 allow
                set routemap sase_sec_in id 10 match neighbor 169.254.200.100 on
                set routemap sase_sec_in id 10 action preference 50