MHO Ports
Note:
The widgets displayed depend on the asset type and version.
The MHO Ports tab displays all Maestro Orchestrator ports in a single table, including their hardware details and link status information.
The following table describes the fields in the MHO Ports table.
| Item | Description |
|---|---|
| Port | Physical port identifier on the Orchestrator in this format:
|
| Interface Name | Name of the interface. |
| Type | Type of the port. For example, Management, Downlink, Uplink. |
| Speed | Configured port speed. |
| Auto Negotiation | IEEE 802.3 auto-negotiation. Indicates if the port automatically negotiates speed and duplex with the connected device. |
| FEC Mode | Forward Error Correction mode status. Indicates if FEC is enabled to correct transmission errors. |
| Logical Port | The logical representation or grouping of a physical port. |
| Operating Speed | Current operating speed of the port. |
| Link State | Current physical state of the link. |
| Admin State | Administrative state set for the port:
|
| Transceiver State | Status of the transceiver module. |
| Temperature (°C) | Temperature of the transceiver module, in degree Celsius. |
| RX (Mbit/s) | The current received (RX) data rate in megabits per second. |
| TX (Mbit/s) | The current transmitted (TX) data rate in megabits per second. |
| RX Power Lanes | Received optical power (dBm) for each transceiver lane. |
| TX Power Lanes | Transmitted optical power (dBm) for each transceiver lane. |