Configuring BGP in Clish

• To see the available "set" commands for BGP, enter in Clish:

  set bgp[Space][Tab]

• To see the available "show" commands for BGP, enter in Clish:

  show bgp[Space][Tab]

Note - Starting in R81.10.05, it is supported to configure BGP in the WebUI. See Configuring BGP in WebUI

Workflow:

1. Configure the required BGP settings. See the next sections.

2. Configure the rule to accept the BGP traffic from the applicable routers:

   • For a Locally Managed appliance, see the Quantum Spark Appliances Locally Managed Administration Guide for your version (2000 models, 19000 models, 1800 models, 1600 models, 1500 models) > Chapter Appliance Configuration > Section Managing the Access Policy > Section Working with the Firewall Access Policy.

   • For a Centrally Managed appliance, see the:

     • Quantum Spark Appliances Centrally Managed Administration Guide for your version (2000 models, 19000 models, 1800 models, 1600 models, 1500 models) > Chapter Small-scale Deployment Installation > Section Creating the Security Policy.

     • Quantum Security Management Administration Guide for your version > Chapter Creating an Access Control Policy.