show radius-server priority

In the R81.10.X releases, this command is available starting from the R81.10.00 version.

Description

Show RADIUS servers with the specified priority.

See:

Syntax

show radius-server priority {1 | 2}

Parameters

Parameter

Description

priority

Specifies the priority of the RADIUS servers to show.

Example Command

HostName> show tacacs-server priority 1

priority:                     1
ipv4-address:                 192.168.3.200
ipv6-address:
udp-port:                     1812
shared-secret:                78343c263a57
timeout:                      3
version:                      1