set radius-server

In the R81.10.X releases, this command is available starting from the R81.10.00 version.

Description

Configures RADIUS servers.

Allows locally managed Remote Access users (on the RADIUS server) to have longer passwords for increased security.

See:

• show radius-server priority

• show radius-server priority

• delete radius-server

Syntax

set radius-server priority {1 | 2} ipv4-address <ipv4-address> [ ipv6-address <ipv6-address> ] shared-secret <shared-secret> [ udp-port <udp-port> ] [ timeout <timeout> ] [ version {1 | 2} ]

Parameters

Parameter	Description
ipv4-address	The IPv4 address of the RADIUS server.
ipv6-address	The IPv6 address of the RADIUS server.
priority	Priority of the RADIUS server: 1 (primary) 2 (secondary) Default: 1.
shared-secret	Pre-shared secret between the RADIUS server and the appliance. A string that contains alphanumeric and special characters.
timeout	A timeout value in seconds for communication with the RADIUS server. Default: 3. Range: 0 - 5000.
version	Version of the RADIUS server: 1 2 Default: 1.
udp-port	The port number through which the RADIUS server communicates with clients. Default: 1812.

Example Command

set radius-server priority 2 ipv4-address 192.168.1.1 shared-secret a(&7Ba timeout 15 version 2