show mape-values

In the R81.10.X releases, this command is available starting from the R81.10.15 version.

Description

Mapping of Address and Port using Encapsulation (MAP-E), like DSLite, is a mechanism to facilitate the transition from IPv4 to IPv6. Both the address and port mapping information are embedded within the IPv6 address.

Unlike DSLite, this method involves a direct mapping scheme without the need for a centralized CGNAT. IPv4 packers are encapsulation in IPv6 but use predefined mapping rules to determine the destination.

This command shows the current MAP-E rules:

• IP address

• Port range

See:

• add internet-connection type map-e

• set internet-connection type map-e

Syntax

Example Output

My_GW> show mape-values
Last update:  11:27:47 20-09-2024
Status code: 200
Port ranges:
7264-7279
11360-11375
15456-15471
19552-19567
23648-22663
27744-27759
31840-31855
35936-35951
40032-40047
44128-44143
48224-48239
52320-52335
56416-56431
60512-60527
64608-64623
My_GW>