set internet-connection type map-e

In the R81.10.X releases, this command is available starting from the R81.10.15 version.

Description

Mapping of Address and Port using Encapsulation (MAP-E), like DSLite, is a mechanism to facilitate the transition from IPv4 to IPv6. Both the address and port mapping information are embedded within the IPv6 address.

Unlike DSLite, this method involves a direct mapping scheme without the need for a centralized CGNAT. IPv4 packers are encapsulation in IPv6 but use predefined mapping rules to determine the destination.

Use this command to configure the MAP-E settings.

See:

In WebUI, this corresponds to:

  1. Click the Device view > Network section > Internet page.

  2. Edit the applicable Internet connection.

Syntax

set internet-connection Name of MAP-E Connection type map-e

      map-e-connection-type dynamic aftr-address <DS-Lite/IPIP Tunnel> linked-ipv6-connection <Name of IPv6 Connection>

      map-e-connection-type static vne-update-server-url <URL of Update VNE Server> vne-update-server-username <Username for Update VNE Server> vne-update-server-password <Password for Update VNE Server> enable-vne-unnumbered-ip {on | off} aftr-address <DS-Lite/IPIP Tunnel> linked-ipv6-connection <Name of IPv6 Connection>

Parameters

Parameter

Description

name

Specifies the name for this MAP-E Internet connection.

Press the TAB key to see the available options.

type

Specifies the MAP-E type for this Internet connection.

map-e-connection-type

Specifies the MAP-E connection type:

  • dynamic - Dynamic (supported for both MAP-E vendors "OCN" and "JPIX")

  • static - Static (supported only for the MAP-E vendor "OCN")

aftr-address

Specifies the Hostname or IPv6 address for a DS-Lite/IPIP tunnel.

linked-ipv6-connection

Specifies the Name of the applicable IPv6 Internet connection.

Press the TAB key to see the available options.

vne-update-server-url

Specifies the URL for Update VNE Server.

vne-update-server-username

Specifies the username for Update VNE Server.

The username should contain only these characters:

  • A string that contains only lower-case letters (a-z).

  • A string that contains only upper-case letters (A-Z).

  • A string that contains only digits (0-9).

  • A string that contains only an underscore ('_').

vne-update-server-password

Specifies the password for Update VNE Server.

The password should contain only these characters:

  • English alphanumeric

  • ( ) ! @ # $ % ^ & * ? - _ = + : ; . ,

enable-vne-unnumbered-ip

Specifies how to assign a public IP address to a single LAN interface or to a LAN switch on the Quantum Spark Gateway:

  • on - Assign the public IP address (use a numbered IP address).

  • off (default) - Do not assign the public IP address (use an unnumbered IP address).

Example - Static MAP-E Connection

set internet-connection MAPE type map-e map-e-connection-type static vne-update-server-url https://example.com vne-update-server-username john vne-update-server-password 123123123 enable-vne-unnumbered-ip off aftr-address 12::1 linked-ipv6-connection Internet2

Example - Dynamic MAP-E Connection

set internet-connection MAPE map-e-connection-type dynamic aftr-address 12::1 linked-ipv6-connection Internet2