show admin-access-ipv4-addresses

In the R81.10.X releases, this command is available starting from the R81.10.00 version.

Description

Shows allowed IP addresses, from which the administrator can remotely access the appliance according to configuration.

See:

• add admin-access-ipv4-address single-ipv4-address

• add admin-access-ipv4-address network-ipv4-address

• show admin-access-ip-addresses

• delete admin-access-ipv4-address

• delete admin-access-ipv4-address-all

• delete admin-access-ip-address-all

Syntax

show admin-access-ipv4-addresses