add admin-access-ipv4-address single-ipv4-address

In the R81.10.X releases, this command is available starting from the R81.10.00 version.

Description

Configures a specific IPv4 address, from which the administrator can remotely access the appliance according to configuration.

See:

• add admin-access-ipv4-address network-ipv4-address

• show admin-access-ip-addresses

• show admin-access-ipv4-addresses

• delete admin-access-ipv4-address

• delete admin-access-ipv4-address-all

• delete admin-access-ip-address-all

Syntax

add admin-access-ipv4-address single-ipv4-address <single-ipv4-address>

Parameters

Parameter	Description
single-ipv4-address	Configures the IPv4 address of the allowed computer

Example Command

add admin-access-ipv4-address single-ipv4-address 192.168.22.33