R82 Quantum Security Management Administration Guide

Location of 'vpn_route.conf' Files on the Management Server

The 'vpn_route.conf' files contain the configuration for Domain-Based Site to Site VPN.

Important:

You must edit this file in the context of the applicable Domain Management Server Check Point Single-Domain Security Management Server or a Multi-Domain Security Management Server..

To go to the required context, use the command:

mdsenv <IP Address or Name of Domain Management Server>
If the required file does not exist, create a copy of the $FWDIR/conf/vpn_route.conf file, rename it, and edit it.

Location of files on an R82 Security Management Server:

Version of the Target Security Gateway	Location of the File
R82	`$FWDIR/conf/vpn_route.conf`
R81.20	`/opt/CPR8120CMP-R82/conf/vpn_route.conf`
R81.10	`/opt/CPR8120CMP-R82/conf/vpn_route.conf`
R81.10.x on Quantum Spark Appliances 1500 / 1600 / 1800	`/opt/CPSFWR81CMP-R82/conf/vpn_route.conf`
R81	`/opt/CPR8120CMP-R82/conf/vpn_route.conf`
R80.40	`/opt/CPR8040CMP-R82/conf/vpn_route.conf`
R80.30SP in Maestro	`/opt/CPR8040CMP-R82/conf/vpn_route.conf`
R80.30	`/opt/CPR8040CMP-R82/conf/vpn_route.conf`
R80.20SP in Maestro, or Scalable Chassis	`/opt/CPR8040CMP-R82/conf/vpn_route.conf`
R80.20	`/opt/CPR8040CMP-R82/conf/vpn_route.conf`
R80.20.x on Quantum Spark Appliances 1500 / 1600 / 1800	`/opt/CPSFWR80CMP-R82/conf/vpn_route.conf`
R80.10	`/opt/CPR8040CMP-R82/conf/vpn_route.conf`

16 June 2025

© 2024 - 2025 Check Point Software Technologies Ltd.