show distribution

This command is supported only on these:

  • ElasticXL Cluster

  • Maestro Security Group

  • Scalable Chassis Security Group

Note - You must run this command in Gaia gClish.

Description

Shows the settings for the Distribution Mode.

See Working with the Distribution Mode.

Related Commands

Syntax

show distribution

      configuration

      interface <Name of Interface> configuration

      l4-mode

      matrix-max-size

      matrix-size [mode {general | user-network | per-port} ipv6 {on | off} spi {on | off} l4-mode {on | off} mtx-max-size {1k | 2k | 4k | 8k | 16k}]

      spi mode

      status [verbose]

      verification [verbose]

Commands

Command

Description

show distribution configuration

Shows the Distribution Configuration.

show distribution interface

Shows the Interface Distribution Mode settings.

show distribution l4-mode

Shows the Layer 4 Distribution Mode settings.

show distribution matrix-max-size

Shows the maximum size of the Distribution Mode Matrix.

show distribution matrix-size

Shows the maximum current size of the Distribution Mode Matrix.

You can specify different mode parameters.

show distribution spi mode

Shows the status of the SPI Distribution Mode.

show distribution status [verbose]

Shows the Distribution Mode status.

show distribution verification [verbose]

Shows the results of the Distribution Mode verification test.