add maestro

This command is supported only on:

Note - You must run this command in Gaia Clish.

Description

Adds items to Security Groups on the Maestro Orchestrator.

Related Commands

Syntax

add maestro[Esc][Esc]

add maestro auto-scale security-group-id <ID>

scale-down-policy when <Trigger> with <Metric> less-than <Threshold> period <Duration>

scale-up-policy when <Trigger> with <Metric> more-than <Threshold> period <Duration>

add maestro lsp group <1-1024> [port <Port1>,<Port2>,...]

add maestro port <Name> vlan <ID>

add maestro security-group id <ID>

interface <Name>

site-id <ID> serial <Serial Number>

Commands

Command	Description
`add maestro auto-scale`	Configures the Auto-Scaling settings. See Maestro Auto-Scaling.
`add maestro lsp group <1-1024> [port <Port1>,<Port2>,...]`	Creates a Link State Propagation (LSP) Group and adds ports to this LSP Goup. See Configuring Link State Propagation (LSP) on a Maestro Orchestrator.
`add maestro port <Name> vlan <ID>`	Adds a VLAN on the port.
`add maestro security-group id <ID>`	Adds an unassigned item to a Security Group. `interface <Name>` Add an unassigned interface to the Security Group. `site-id <ID> serial <Serial Number>` Add an unassigned Security Appliance to the Security Group.