Showing Hardware State (asg stat)
Description
Use the "asg stat" command in Gaia gClish
The name of the global command line shell in Check Point Gaia operating system for Security Appliances connected to Check Point Quantum Maestro Orchestrators. Commands you run in this shell apply to all Security Appliances in the Security Group. or the Expert mode to show the state of the system and hardware components.
The command output shows:
-
Security Gateway
Dedicated Check Point server that runs Check Point software to inspect traffic and enforce Security Policies for connected network resources. Mode (Gateway or VSX Virtual System Extension. Check Point virtual networking solution, hosted on a computer or cluster with virtual abstractions of Check Point Security Gateways and other network devices. These Virtual Devices provide the same functionality as their physical counterparts.) -
Number of Virtual Systems
-
Information related to VSX configuration
-
Uptime
-
Software Version
Syntax
asg stat -h -i list_all -i sgm_info -i tasks -v [-amw] vs [all [-p]] |
Note - If you run this command in the context of a Virtual System, the output applies only to that Virtual System.
Parameters
|
Parameter |
Description |
|---|---|
|
No Parameters |
Shows the |
|
|
Shows the built-in help. |
|
|
Shows:
|
|
|
Shows the IDs of the Security Group Members, their state and IP addresses |
|
|
Shows the list of Tasks and on which Security Group Member they run:
|
|
|
Shows the detailed The " |
|
|
Shows the VSX information:
For more information on a specific Virtual System, run the " |
Examples
Example 1 - Default Output (asg stat)
Syntax
|
|
Example output from a Security Group in a
Example output from a Security Group in a
Example 2 - Detailed Output (asg stat -v)
Syntax
|
|
Example output from a Security Group in a
This output shows a Security Group with 12 Security Group Members in the Active (UP) state (out of total 12).
The
The
Example output from a Security Group in a
This output shows a Security Group with 30 Security Group Members in the Active (UP) state (out of total 30).
Explanation about the output:
|
Field |
Instructions |
||
|---|---|---|---|
|
SGM ID |
Identifier of the Security Group Member. The |
||
|
State |
State of the Security Group Member:
|
Example output from a Security Group in a
Example output from a Security Group in a
|
|
Note - In the notation " For example, on the SGMs line, "30 / 30" means that there are currently 30 Security Group Members in the UP state out of the 30 that must be in the UP state. |
|
Field |
Description |
||
|---|---|---|---|
|
Grade |
The sum of the grades of all components. The grade of each component is the unit weight multiplied by the number of components that are in the UP state. You can configure the unit weight of each component to show the importance of the component in the system. To configure the unit weight, run in Gaia
For example, to change the weight of the Security Group Member to 12, run in Gaia Clish
See Configuring Security Group High Availability. If you run the " |
||
|
Minimum grade gap for chassis failover |
Minimum threshold for traffic processing - the minimum grade required for the |
||
|
Synchronization |
Status of synchronization between Security Group Members:
|
Example 3 - List of Tasks (asg stat -i tasks)
Syntax
|
|
Example output from a Security Group in a
The SMO task runs on (local)").
Example output from all Security Group Members (in our example, there are two on each
Example output from a Security Group in a
The SMO task runs on the Security Group Member #1, on which you ran this command (see the string "(local)").