Registering Critical Devices Listed in a File
|
Important - In a Cluster Two or more Security Gateways that work together in a redundant configuration - High Availability, or Load Sharing., you must configure all the Cluster Members in the same way. |
Description
This command registers all the user-defined Critical Devices listed in the specified file.
This file must be a plain-text ASCII file, with each Critical Device A special software device on each Cluster Member, through which the critical aspects for cluster operation are monitored. When the critical monitored component on a Cluster Member fails to report its state on time, or when its state is reported as problematic, the state of that member is immediately changed to Down. The complete list of the configured critical devices (pnotes) is printed by the 'cphaprob -ia list' command or 'show cluster members pnotes all' command. Synonyms: Pnote, Problem Notification. defined on a separate line.
Each definition must contain three parameters, which must be separated by a space or a tab character:
|
Where:
Syntax
Shell |
Command |
---|---|
N / A |
|
Expert mode |
|
|
Note - The " |