ModifyROBOInterface VPN1Edge

This command modifies the VPN1Edge Internal Interface list.

Usage

LSMcli [-d] <server> <user> <pswd> ModifyROBOInterface VPN1Edge <RoboName> <InterfaceName> and at least one of: [-i=<IPAddress>] [-NetMask=<NetMask>]
[-Enabled=<true|false>] [-HideNAT=<true|false>] [-DHCPEnabled=<true|false>]
[-DHCPIpAllocation=<automatic>|<FirstIP-LastIP>|<IP address of DHCP Relay Server>] and optionally: [-IfOverlappingIPRangesDetected=<exit|warn|ignore>]

Parameters

ModifyROBOInterface UTM-1 Edge Parameters

Parameter	Description
`server`	Name/IP address of the Security Management Server or Domain Management Server.
`user`	User name of standard Check Point authentication method.
`pswd`	Password of standard Check Point authentication method.
`RoboName`	Name of the SmartLSM UTM-1 Edge device.
`InterfaceName`	Name of an existing interface.
`IPAddress`	IP address of the interface.
`NetMask`	Net mask of the interface.
`Enabled`	Flag to enable/disable the selected interface.
`HideNAT`	Flag to specify whether the interface is identified by the IP address of the UTM-1 Edge device (hidden behind NAT).
`DHCPEnabled`	Flag to enable dynamically allocated IP addresses.
`DHCPIpAllocation`	Flag to determine how IP addresses are dynamically allocated. The options are: automatic, <FirstIP-LastIP>, and DHCP Relay Server.
`IfOverlappingIPRangesDetected`	Flag to determine course of action if overlapping IP address ranges are detected. The options are: exit, warn, and ignore.

Example

LSMcli mySrvr name pass ModifyROBOInterface VPN1Edge MyRobo DMZ -i=192.0.2.1
-Netmask=255.255.255.0 -Enabled=true -HideNAT=false -DHCPEnabled=true
-DHCPIpAllocation=automatic