ModifyROBOInterface VPN1

This command modifies the Internal Interface list.

Usage

LSMcli [-d] <server> <user> <pswd> ModifyROBOInterface VPN1 <RoboName> <InterfaceName> and at least one of: [-i=<IPAddress>] [-Netmask=<NetMask>] and optionally:
[-IfOverlappingIPRangesDetected=<exit|warn|ignore>]

Parameters

ModifyROBOInterface VPN1 Parameters

Parameter	Description
`server`	Name/IP address of the Security Management Server Domain Management Server
`user`	User name of standard Check Point authentication method
`pswd`	Password of standard Check Point authentication method
`RoboName`	Name of the SmartLSM Security Gateway
`InterfaceName`	Name of the existing interface
`IPAddress`	IP address of the interface
`NetMask`	Net mask of the interface
`IfOverlappingIPRangesDetected`	Flag to determine course of action, if overlapping IP address ranges are detected. The options are: exit`,` warn and ignore

Example

LSMcli mySrvr name pass ModifyROBOInterface VPN1 MyRobo eth0 -i=192.0.2.1
-Netmask=255.255.255.0