|
|
|
To install a clean Gaia Operating System on an Open Server, you can use:
To perform a clean install of the supported Gaia image with a DVD-ROM:
Step |
Description |
|---|---|
1 |
Download the Gaia Operating System Clean Install ISO file from the R80.30 Home Page SK. |
2 |
Burn the ISO image onto a DVD disc. |
3 |
Connect the DVD-ROM to your Open Server. |
4 |
Reboot your Open Server. |
5 |
Enter the BIOS and configure the DVD-ROM to be the first boot option. |
6 |
Reboot your Open Server. |
7 |
Your Open Server should boot from the DVD-ROM. |
8 |
Gaia installation menu should appear. |
9 |
Follow the instructions on the screen. |
10 |
After Gaia installs and before the reboot, disconnect the DVD-ROM from your Open Server. |
11 |
Reboot your Open Server. |
12 |
Enter the BIOS and configure the Hard Disk to be the first boot option. |
13 |
Reboot your Open Server. |
14 |
Your Open Server should boot the Gaia operating system. |
15 |
To perform a clean install of the supported Gaia image with a bootable USB device:
Step |
Description |
|---|---|
1 |
Download the Gaia Operating System ISO file from R80.30 Home Page SK. |
2 |
See sk65205 to create a bootable USB device. Important - Always use the latest available build of the ISOmorphic Tool. If you use an outdated build, the installation can fail. |
3 |
To perform a clean install of the supported Gaia image with the CPUSE:
See Installing Software Packages on Gaia and follow the applicable action plan for the local installation.
