Host Access

The Allowed-Clients feature lets you specify hosts or networks that are allowed to connect to the Gaia Portal or Gaia Clish on the Gaia device.

Step	Description
1	In the navigation tree, click System Management > Host Access.
2	Click Add. The Add a New Allowed Client window opens.
3	Select one of these options: Any host - All remote hosts can access the Gaia Portal, or Gaia Clish. Host - Enter the IP address of one host. Network - Enter the IP address of a network and subnet mask.
4	Click OK.

Description

Configure allowed clients for remote access to the Gaia Portal, or Gaia Clish.

Syntax

Important - After you add, configure, or delete features, run the save config command to save the settings permanently.

Parameters

Parameter	Description
`<`Host IPv4 Address`>`	The IPv4 address of the allowed host in dotted decimal format (X.X.X.X)
`<`Network IPv4 Address`>`	The IPv4 address of the allowed network in dotted decimal format (X.X.X.X)

Example

gaia> add allowed-client host any-host

gaia> show allowed-client all

Type Address Mask Length

Host Any