|
|
|
Telnet is not recommended for remote login because it is not secure. SSH, for example, provides much of the functionality of Telnet with good security. Network access to Gaia using Telnet is disabled by default. However, you can allow Telnet access.
Step |
Description |
|---|---|
1 |
In the navigation tree, click System Management > Network Access. |
2 |
Select Enable Telnet. |
3 |
Click Apply. |
Description
Configure and show the network access using Telnet to the Gaia computer.
Syntax
set net-access telnet {on | off} |
show net-access telnet |
Important - After you add, configure, or delete features, run the save config command to save the settings permanently.
