Host Access

The Allowed-Clients feature lets you specify hosts or networks that are allowed to connect to the Gaia Portal or Gaia Clish on the Gaia device.

Configuring Allowed Gaia Clients - Gaia Portal

Step	Description
1	In the navigation tree, click System Management > Host Access.
2	Click Add. The Add a New Allowed Client window opens.
3	Select one of these options: Any host - All remote hosts can access the Gaia Portal, or Gaia Clish. Host - Enter the IP address of one host. Network - Enter the IP address of a network and subnet mask.
4	Click OK.

Configuring Allowed Gaia Clients - Gaia Clish

Description

Configure allowed clients for remote access to the Gaia Portal, or Gaia Clish.

Syntax

• To add an allowed client:

  add allowed-client host any-host ipv4-address <Host IPv4 Address> network ipv4-address <Network IPv4 Address> mask-length <1-31>

• To show the configured allowed clients:

  show allowed-client all

• To delete an allowed client:

  delete allowed-client host any-host host ipv4-address <Host IPv4 Address> network ipv4-address <Network IPv4 Address>

Important - After you add, configure, or delete features, run the save config command to save the settings permanently.

Parameters

Parameter	Description
<Host IPv4 Address>	The IPv4 address of the allowed host in dotted decimal format (X.X.X.X)
<Network IPv4 Address>	The IPv4 address of the allowed network in dotted decimal format (X.X.X.X)

Example

gaia> add allowed-client host any-host   gaia> show allowed-client all Type Address Mask Length Host Any