Network Access

Telnet is not recommended for remote login because it is not secure. SSH, for example, provides much of the functionality of Telnet with good security. Network access to Gaia using Telnet is disabled by default. However, you can allow Telnet access.

Configuring Telnet Access - Gaia Portal

Step	Description
1	In the navigation tree, click System Management > Network Access.
2	Select Enable Telnet.
3	Click Apply.

Configuring Telnet Access - Gaia Clish

Description

Configure and show the network access using Telnet to the Gaia computer.

Syntax

• To configure Telnet access:

  set net-access telnet {on | off}

• To show the configured Telnet access:

  show net-access telnet

Important - After you add, configure, or delete features, run the save config command to save the settings permanently.