Important - You must configure all the Cluster Members in the same way.
Description
You can configure how to show the Cluster Member in the local ClusterXL logs - by its Member ID (default) or its Member Name.
This configuration affects these local logs:
/var/log/messages
dmesg
$FWDIR/log/fwd.elg
Note - See Viewing the Cluster Member ID Mode in Local Logs.
Syntax
Shell |
Command |
---|---|
Gaia Clish |
|
Expert mode |
|
Example
[Expert@Member2:0]# cphaprob names Current member print mode in local logs is set to: ID [Expert@Member2:0]#
[Expert@Member2:0]# cphaconf mem_id_mode name Member print mode in local logs: NAME [Expert@Member2:0]#
[Expert@Member2:0]# cphaprob names Current member print mode in local logs is set to: NAME [Expert@Member2:0]# |