Description
Use the monitoring commands to make sure that the cluster and the Cluster Members work properly, and to define Critical Devices. A Critical Device (also known as a Problem Notification, or pnote) is a special software device on each Cluster Member, through which the critical aspects for cluster operation are monitored. When the critical monitored component on a Cluster Member fails to report its state on time, or when its state is reported as problematic, the state of that member is immediately changed to 'Down'.
Syntax
Notes:
Enter the show cluster<ESC><ESC>
to see all the available commands.
Run the cphaprob
command see all the available commands.
You can run the cphaprob
commands from Gaia Clish as well.
Enclose a list of available commands or parameters, separated by the vertical bar |, from which user can enter only one.
Enclose a variable - a supported value user needs to specify explicitly.
Enclose an optional command or parameter, which user can also enter.
The meaning of each command is explained in the next sections.
Description |
Command in |
Command in |
---|---|---|
|
|
|
Show Critical Devices (Pnotes) and their states on the Cluster Member |
show cluster members pnotes
|
|
show cluster members interfaces all secured virtual vlans |
|
|
show cluster bond all name <bond_name> |
|
|
|
|
|
Show (and reset) cluster failover statistics on the Cluster Member |
|
|
Show configuration of MAC Magic and MAC Forward Magic on the Cluster Member |
|
|
|
|
|
Show Delta Sync statistics for the Connections table on the Cluster Member |
|
|
Show the Cluster Control Protocol (CCP) mode on the Cluster Member |
|
|
|
|
|
|
|
|
Show the Cluster Member ID Mode in local logs - by Member ID (default) or Member Name. |
|
|
Show interfaces, which the RouteD monitors on the Cluster Member when you configure OSPF |
|
|
|
|
|
|
|
|
|
|
List of the Gaia Clish show cluster
commands
show cluster bond all name <Name of Bond> failover [reset {count | history}] members idmode igmp interfaces all secured virtual vlans ips pnotes all problem mmagic roles state statistics sync [reset] transport [reset] |
List of the cphaprob
commands
Note - Some commands are not applicable to 3rd party clusters.
cphaprob [-vs <VSID>] state cphaprob [-reset {-c | -h}] [-l <count>] show_failover cphaprob [-vs <VSID>][-k][-S] mmagic cphaprob names cphaprob [-reset] [-a] syncstat cphaprob [-reset] ldstat cphaprob [-l] [-i[a]] [-e] list cphaprob [-vs all] [-a] [-m] if cphaprob show_bond [<bond_name>] cphaprob show_bond_groups cphaprob igmp cphaprob tablestat cphaprob routedifcs cphaprob roles cphaprob {corr | -c {a | d |f}} |