Description
This command lets you see the Cluster Control Protocol (CCP) mode on the Cluster Members.
Syntax
Shell |
Command |
---|---|
Gaia Clish |
|
Expert mode |
|
Example
[Expert@Member2:0]# cphaprob -a if
CCP mode: Automatic Required interfaces: 3 Required secured interfaces: 1
eth0 UP non sync(non secured), multicast eth1 UP sync(secured), unicast eth2 UP non sync(non secured), multicast
Virtual cluster interfaces: 2
eth0 192.168.3.55 VMAC address: 00:1C:7F:00:36:70 eth2 192.250.3.55 VMAC address: 00:1C:7F:00:36:70
[Expert@Member2:0]# |