Print

Download PDF

Send Feedback

CoreXL Commands

In This Section:

'fw ctl multik' and 'fw6 ctl multik'

fw ctl affinity

For more information about CoreXL, see the R80.20 Performance Tuning Administration Guide - Chapter CoreXL.

'fw ctl multik' and 'fw6 ctl multik'

Description

The fw ctl multik and fw6 ctl multik commands control CoreXL for IPv4 and IPv6, respectively.

Syntax for IPv4

fw ctl multik

add_bypass_port <options>

del_bypass_port <options>

dynamic_dispatching <options>

gconn <options>

get_instance <options>

print_heavy_conn

prioq <options>

show_bypass_ports

stat

start

stop

utilize

Syntax for IPv6

fw6 ctl multik

add_bypass_port <options>

del_bypass_port <options>

dynamic_dispatching <options>

gconn <options>

get_instance <options>

print_heavy_conn

prioq <options>

show_bypass_ports

stat

start

stop

utilize

Parameters

Parameter	Description
`add_bypass_port <`options`>`	Adds the specified TCP and UDP ports to the CoreXL Dynamic Dispatcher bypass list.
`del_bypass_port <`options`>`	Removes the specified TCP and UDP ports from the CoreXL Dynamic Dispatcher bypass list.
`dynamic_dispatching` <options>	Shows and controls CoreXL Dynamic Dispatcher. See sk105261.
`gconn <`options`>`	Shows statistics about CoreXL Global Connections.
`get_instance` <options>	Shows CoreXL FW instance that processes the specified IPv4 connection.
`print_heavy_conn`	Shows the table with Heavy Connections (that consume the most CPU resources) in the CoreXL Dynamic Dispatcher.
`prioq` <options>	Configures the CoreXL Firewall Priority Queues. See sk105762.
`show_bypass_ports`	Shows the TCP and UDP ports configured in the bypass port list of the CoreXL Dynamic Dispatcher.
`stat`	Shows the CoreXL status.
`start`	Starts all CoreXL FW instances on-the-fly.
`stop`	Stops all CoreXL FW instances temporarily.
`utilize`	Shows the CoreXL queue utilization for each CoreXL FW instance.