The Check Point Threat Prevention Solution

In This Section:

Threat Prevention Components

To challenge today's malware landscape, Check Point's comprehensive Threat Prevention solution offers a multi-layered, pre- and post-infection defense approach and a consolidated platform that enables enterprise security to detect and block modern malware. These Threat Prevention Software Blades are available:

IPS - A complete IPS cyber security solution, for comprehensive protection against malicious and unwanted network traffic, which focuses on application and server vulnerabilities, as well as in-the-wild attacks by exploit kits and malicious attackers.
Anti-Bot - Post-infection detection of bots on hosts. Prevents bot damages by blocking bot C&C (Command and Control) communications. The Anti-Bot Software Blade is continuously updated from ThreatCloud, a collaborative network to fight cybercrime. Anti-Bot discovers infections by correlating multiple detection methods.
Anti-Virus - Pre-infection detection and blocking of malware at the gateway. The Anti-Virus Software Blade is continuously updated from ThreatCloud. It detects and blocks malware by correlating multiple detection engines before users are affected.
SandBlast - Protection against infections from undiscovered exploits, zero-day and targeted attacks:
- Threat Emulation - This innovative solution quickly inspects files and runs them in a virtual sandbox to discover malicious behavior. Discovered malware is prevented from entering the network. The ThreatCloud Emulation service reports to the ThreatCloud and automatically shares the newly identified threat information with other Check Point customers.
- Threat Extraction - Protection against incoming malicious content. The Threat Extraction capability removes exploitable content, including active content and embedded objects, reconstructs files to eliminate potential threats, and promptly delivers sanitized content to users to maintain business flow. To remove possible threats, the Threat Extraction blade creates a safe copy of the file, while the Threat Emulation Software Blade inspects the original file for potential threats.

Each Software Blade gives unique network protections. When combined, they supply a strong Threat Prevention solution. Data from malicious attacks are shared between the Threat Prevention Software Blades and help to keep your network safe. For example, the signatures from threats that Threat Emulation identifies are added to the ThreatCloud for use by the other Threat Prevention blades.

IPS

The IPS Software Blade delivers complete and proactive intrusion prevention. It delivers 1,000s of signatures, behavioral and preemptive protections. It gives another layer of security on top of Check Point firewall technology. IPS protects both clients and servers, and lets you control the network usage of certain applications. The hybrid IPS detection engine provides multiple defense layers, which allows it excellent detection and prevention capabilities of known threats and in many cases future attacks as well. It also allows unparalleled deployment and configuration flexibility and excellent performance.

Elements of Protection

IPS protection includes:

Detection and prevention of specific known exploits.
Detection and prevention of vulnerabilities, including both known and unknown exploit tools, for example protection from specific CVEs.
Detection and prevention of protocol misuse which in many cases indicates malicious activity or potential threat. Examples of commonly manipulated protocols are HTTP, SMTP, POP, and IMAP.
Detection and prevention of outbound malware communications.
Detection and prevention of tunneling attempts. These attempts may indicate data leakage or attempts to circumvent other security measures such as web filtering.
Detection, prevention or restriction of certain applications which, in many cases, are bandwidth consuming or may cause security threats to the network, such as Peer to Peer and Instant Messaging applications.
Detection and prevention of generic attack types without any pre-defined signatures, such as Malicious Code Protector.

Check Point constantly updates the library of protections to stay ahead of emerging threats.

Capabilities of IPS

The unique capabilities of the Check Point IPS engine include:

Clear, simple management interface.
Reduced management overhead by using one management console for all Check Point products
Integrated management with SmartConsole.
Easy navigation from business-level overview to a packet capture for a single attack.
#1 security coverage for Microsoft and Adobe vulnerabilities.
Resource throttling so that high IPS activity will not impact other blade functionality
Complete integration with Check Point configuration and monitoring tools in SmartConsole, to let you take immediate action based on IPS information.

For example, some malware can be downloaded by a user unknowingly when he browses to a legitimate web site, also known as a drive-by-download. This malware can exploit a browser vulnerability to create a special HTTP response and sending it to the client. IPS can identify and block this type of attack even though the firewall may be configured to allow the HTTP traffic to pass.

Anti-Bot

A bot is malicious software that can infect your computer. It is possible to infect a computer when you open attachments that exploit a vulnerability, or go to a web site that results in a malicious download.

When a bot infects a computer, it:

Takes control of the computer and neutralizes its Anti-Virus defenses. It is not easy to find bots on your computer; they hide and change how they look to Anti-Virus software.
Connects to a C&C (Command and Control center) for instructions from cyber criminals. The cyber criminals, or bot herders, can remotely control it and instruct it to do illegal activities without your knowledge. Your computer can do one or more of these activities:
- Steal data (personal, financial, intellectual property, organizational)
- Send spam
- Attack resources (Denial of Service Attacks)
- Consume network bandwidth and reduce productivity

One bot can often create multiple threats. Bots are frequently used as part of Advanced Persistent Threats (APTs) where cyber criminals try to damage individuals or organizations.

The Anti-Bot Software Blade detects and prevents these bot and botnet threats. A botnet is a collection of compromised and infected computers.

The Anti-Bot Software Blade uses these procedures to identify bot infected computers:

Identify the C&C addresses used by criminals to control bots
These web sites are constantly changing and new sites are added on an hourly basis. Bots can attempt to connect to thousands of potentially dangerous sites. It is a challenge to know which sites are legitimate and which are not.
Identify the communication patterns used by each botnet family
These communication fingerprints are different for each family and can be used to identify a botnet family. Research is done for each botnet family to identify the unique language that it uses. There are thousands of existing different botnet families and new ones are constantly emerging.
Identify bot behavior
Identify specified actions for a bot such as, when the computer sends spam or participates in DoS attacks.

After the discovery of bot infected machines, the Anti-Bot Software Blade blocks outbound communication to C&C sites based on the Rule Base. This neutralizes the threat and makes sure that no sensitive information is sent out.

Anti-Virus

Malware is a major threat to network operations that has become increasingly dangerous and sophisticated. Examples include worms, blended threats (combinations of malicious code and vulnerabilities for infection and dissemination) and trojans.

The Anti-Virus Software Blade scans incoming and outgoing files to detect and prevent these threats, and provides pre-infection protection from malware contained in these files. The Anti-Virus blade is also supported by the Threat Prevention API.

The Anti-Virus Software Blade:

Identifies malware in the organization using the ThreatSpect engine and ThreatCloud repository:
- Prevents malware infections from incoming malicious files types (Word, Excel, PowerPoint, PDF, etc.) in real-time. Incoming files are classified on the gateway and the result is then sent to the ThreatCloud repository for comparison against known malicious files, with almost no impact on performance.
- Prevents malware download from the internet by preventing access to sites that are known to be connected to malware. Accessed URLs are checked by the gateway caching mechanisms or sent to the ThreatCloud repository to determine if they are permissible or not. If not, the attempt is stopped before any damage can take place.
Uses the ThreatCloud repository to receive binary signature updates and query the repository for URL reputation and Anti-Virus classification.

SandBlast

Cyber-threats continue to multiply and now it is easier than ever for criminals to create new malware that can easily bypass existing protections. On a daily basis, these criminals can change the malware signature and make it virtually impossible for signature-based products to protect networks against infection. To get ahead, enterprises need a multi-faceted prevention strategy that combines proactive protection that eliminates threats before they reach users. With Check Point's Threat Emulation and Threat Extraction technologies, SandBlast provides zero-day protection against unknown threats that cannot be identified by signature-based technologies.

Threat Emulation

Threat Emulation gives networks the necessary protection against unknown threats in web downloads and e-mail attachments. The Threat Emulation engine picks up malware at the exploit phase, before it enters the network. It quickly quarantines and runs the files in a virtual sandbox, which imitates a standard operating system, to discover malicious behavior before hackers can apply evasion techniques to bypass the sandbox.

Threat Emulation receives files through these methods of delivery:

E-mail attachments transferred using the SMTP or SMTPS protocols.
Web downloads.
Files sent to Threat Extraction through the Threat Prevention API.

When emulation is done on a file:

The file is opened on more than one virtual computer with different operating system environments.
The virtual computers are closely monitored for unusual and malicious behavior, such as an attempt to change registry keys or run an unauthorized process.
Any malicious behavior is immediately logged and you can use Prevent mode to block the file from the internal network.
The cryptographic hash of a new malicious file is saved to a database and the internal network is protected from that malware.
After the threat is caught, a signature is created for the new (previously unknown) malware which turns it into a known and documented malware. The new attack information is automatically shared with Check Point ThreatCloud to block future occurrences of similar threats at the gateway.

If the file is found not to be malicious, you can download the file after the emulation is complete.

Learn more about Threat Emulation.

Threat Extraction

Threat Extraction is supported on R77.30 and higher.

The Threat Extraction blade extracts potentially malicious content from files before they enter the corporate network. To remove possible threats, the Threat Extraction does one of these two actions:

Creates a safe copy of the file by converting it to PDF, or
Extracts exploitable content out of the file.

Threat Extraction receives files through these methods of delivery:

E-mail attachments received through the Mail transfer Agent.
Files sent to Threat Extraction through the Threat Prevention API.

Threat Extraction delivers the reconstructed file to users and blocks access to the original suspicious version, while Threat Emulation analyzes the file in the background. This way, users have immediate access to content, and can be confident they are protected from the most advanced malware and zero-day threats.

Threat Emulation runs in parallel to Threat Extraction for version R80.10 and higher.

Here are examples for exploitable content in Microsoft Office Suite Applications and PDF files:

Queries to databases where the query contains a password in the clear
Embedded objects
Macros and JavaScript code that can be exploited to propagate viruses
Hyperlinks to sensitive information
Custom properties with sensitive information
Automatic saves that keep archives of deleted data
Sensitive document statistics such as owner, creation and modification dates
Summary properties
PDF documents with:
- Actions such as launch, sound, or movie URIs
- JavaScript actions that run code in the reader's Java interpreter
- Submit actions that transmit the values of selected fields in a form to a specified URL
- Incremental updates that keep earlier versions of the document
- Document statistics that show creation and modification dates and changes to hyperlinks
- Summarized lists of properties

Before you enable the Threat Extraction blade, you must deploy the gateway as a Mail Transfer Agent.

Assigning Administrators for Threat Prevention

You can control the administrator Threat Prevention permissions with a customized Permission Profile. The customized profile can have different Read/Write permissions for Threat Prevention policy, settings, profiles and protections.

Analyzing Threats

Networks today are more exposed to cyber-threats than ever. This creates a challenge for organizations in understanding the security threats and assessing damage.

SmartConsole helps the security administrator find the cause of cyber-threats, and remediate the network.

The Logs & Monitor > Logs view presents the threats as logs.

The other views in the Logs & Monitor view combine logs into meaningful security events. For example, malicious activity that occurred on a host in the network in a selected time interval (the last hour, day, week or month). They also show pre- and post-infections statistics.

You can create rich and customizable views and reports for log and event monitoring, which inform key stakeholders about security activities. For each log or event, you can see a lot of useful information from the ThreatWiki and IPS Advisories about the malware, the virus or the attack.