Interactive Mode Examples

Example 1 - One IPv4 source and destination with -v

> asg search -v

Please enter conn's 5 tuple:

----------------------------

Enter source IP (press enter for wildcard):

>192.0.2.4

Enter destination IP (press enter for wildcard):

>192.0.2.15

Enter destination port (press enter for wildcard):

>

Enter IP protocol ('tcp', 'udp', 'icmp' or enter for wildcard):

>tcp

Enter source port (press enter for wildcard):

>

Lookup for conn: <192.0.2.4, *, 192.0.2.15, *, tcp>, may take few seconds...

<192.0.2.4, 37408, 192.0.2.15, 1130, tcp> -> [2_01 AF, 1_04 AF]

<192.0.2.4, 1130, 192.0.2.15, 49670, tcp> -> [2_01 AF, 1_04 AF]

<192.0.2.4, 1130, 192.0.2.15, 49653, tcp> -> [2_01 AF, 1_04 AF]

<192.0.2.4, 37406, 192.0.2.15, 1130, tcp> -> [2_01 AF, 1_04 AF]

<192.0.2.4, 1130, 192.0.2.15, 49663, tcp> -> [2_01 AF, 1_04 AF]

<192.0.2.4, 1130, 192.0.2.15, 49658, tcp> -> [2_01 AF, 1_04 AF]

<192.0.2.4, 37407, 192.0.2.15, 1130, tcp> -> [2_01 AF, 1_04 AF]

Legend:

A - Active SGM

B - Backup SGM

C - Correction Layer table

F - Firewall connection table

S - SecureXL connection table

Example 2 - One IPv6 source with any Destination on port 8080 and TCP

> asg search 2620:0:2a03:16:2:33:0:1 \* 8080 tcp

Enter source IP (press enter for wildcard):

> 2620:0:2a03:16:2:33:0:1

Enter destination IP (press enter for wildcard):

> 

Enter destination port (press enter for wildcard):

>8080

Enter IP protocol ('tcp', 'udp', 'icmp' or enter for wildcard):

>tcp

Enter source port (press enter for wildcard):

> 

Lookup for conn: <2620:0:2a03:16:2:33:0:1, *, *, 8080, tcp>, may take few seconds... 

<2620:0:2a03:16:2:33:0:1, 52117, 951::69cb:e42d:eac0:652f, 8080, tcp> -> [1_01 A, 2_01 B] 

<2620:0:2a03:16:2:33:0:1, 62775, 951::69cb:e42d:eac0:652f, 8080, tcp> -> [1_01 A, 2_01 B] 

<2620:0:2a03:16:2:33:0:1, 54378, 951::69cb:e42d:eac0:652f, 8080, tcp> -> [1_01 A, 2_01 B] 

A - Active SGM

B - Backup SGM